This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standartis.Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F3335-20 INTERNATIONAL Standard Guide for Assessing the Removal of Additive Manufacturing Residues in Medical Devices Fabricated by Powder Bed Fusion This standard is issued under the fixed designation F3335;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope 1.7 The values stated in SI units are to be regarded as 1.1 This standard provides guidance for assessing the manu- standard.No other units of measurement are included in this facturing material residues in medical devices fabricated using standard. additive manufacturing (AM)techniques specifically from 1.8 This standard does not purport to address all of the powder bed fusion AM technologies. safety concerns if any associated with its use.It is the 1.1.1 Some of the techniques discussed in this guide may be responsibility of the user of this standard to establish appro- applicable to devices fabricated by other types of AM equip- priate safety he...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standartis.Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F3325-20 INTERNATIONAL Standard Specification for Leg-Protective Devices for Chainsaw Users1 This standard is issued under the fixed designation F3325;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (s)indicates an editorial change since the last revision or reapproval. 1.Scope 2.1.2.1 Discussion-The term authority having jurisdiction 1.1 This specification specifies minimum requirements for is used in this document in a broad manner since jurisdictions the design performance testing and certification of protective and the responsibilities of approval agencies vary. clothing and protective devices designed to provide cut resis- 2.1.3 certification n-a system whereby an organization tance protection to the legs of operators of power chainsaws.2 determines that a manufacturer has demonstrated the ability to 1.2 The objective of this specification is to prescribe fit make a product that plies with the requirements of the function and performance criteria for protective clothin...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F3323-21 INTERNATIONAL Standard Terminology for Exoskeletons and Exosuits1 This standard is issued under the fixed designation F3323:the number immediately following the designation indicates the year of original adoption or in the case of revision.the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (s)indicates an editorial change since the last revision or reapproval. 1.Scope 2.2 Other Standards: 1.1 This terminology covers terms associated with exoskel- ANSI/ITSDF B56.5 Safety Standard for Driverless Auto- etons and exosuits.By providing a mon and consistent matic Guided Industrial Vehicles and Automated Func- lexicon the purpose of this terminology is to facilitate - tions of Manned Industrial Vehicles3 munication between individuals who may be involved in the IEC 60601-1-8:2012 Medical electrical equipment-Part research design deployment and use of exoskeletons and 1-8:General requirements for basic safety and essential exosuits in applications including but not limited to industrial performance-Collateral standard:General requirements military emergency response recreational and med...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F3278-20 INTERNATIONAL Standard Performance Specifications and Test Methods for Hand-Held Metal Detectors Used in Safety and Security This standard is issued under the fixed designation F3278:the number immediately following the designation indicates the year of original adoption or.in the case of revision.the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (s)indicates an editorial change since the last revision or reapproval. 1.Scope mendations issued by the World Trade Organization Technical 1.1 This standard applies to all hand-held metal detectors Barriers to Trade (TBT)Committee. (HHMDs)used to find metal contraband concealed or hidden 2.Referenced Documents on people or other objects with accessible surfaces.This standard describes baseline performance requirements which 2.1 ASTM Standards:2 includes metal object detection performance safety (electrical F3356 Practice for Conformity Assessment of Metal Detec- mechanical fire) electromagnetic patibility environmen- tors Used in Safety and Security tal conditions and ranges and mechanical durability.The 2.2 ISO Standards:3 requirements f...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standartis.Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F3261-20 INTERNATIONAL Standard Specification for Resilient Flooring in Modular Format with Rigid Polymeric Core1 This standard is issued under the fixed designation F3261;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope F387 Test Method for Measuring Thickness of Resilient 1.1 This specification covers resilient flooring typically in Floor Covering With Foam Layer tiles or planks format or both that are surface decorated or F410 Test Method for Wear Layer Thickness of Resilient printed and protected by a clear wear layer. Floor Coverings by Optical Measurement F925 Test Method for Resistance to Chemicals of Resilient 1.2 This type of floor covering utilizes a polymeric rigid Flooring core as part of the product structure. F970 Test Method for Measuring Recovery Properties of 1.3 This type of floor covering may utilize an attached Floor Coverings after Static Loading underlay backer for reduced noise...

NOTICE:This standard has either been superseded and replaced by a new version or withdrawn. Contact ASTM International (.astm.org)for the latest information Designation:F3179/F3179M-22 INTERNATIONAL Standard Specification for Performance of Aircraft This standard is issued under the fixed designation F3179/F3179M:the number immediately following the designation indicates the year of original adoption or.in the case of revision.the year of last revision.A number in parentheses indicates the year of last reapproval. A superscript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope mendations issued by the World Trade Organization Technical 1.1 This specification covers the airworthiness design stan- Barriers to Trade (TBT)Committee. dards associated with general aeroplane performance.The 2.Referenced Documents material was developed through open consensus of interna- tional experts in general aviation.This information was created 2.1 ASTM Standards:2 by focusing on Normal Category aeroplanes.The content may F3060 Terminology for Aircraft be more broadly applicable;it is the responsibility of the F3064/F3064M Specification for Aircraft Powerplant Applicant to substantiate broader applicability as a specific Control Operation and Indication means of pliance.The topics covered within this specifi- F3083/F3083M Specification for Emergency Conditions cation are:Stalling Takeoff and Landing Speeds;Takeoff Occupant Safety and Acmodations Performance Distances and Path;Climb;Landing Perfor- F3173/F3173M Specification for Aircraft Handling Charac- mance and Distances;Balked Landing. teristics 1.2 An applicant intending to propose this information as F3174/F3174M Specification for Establishing Operating Limitations and Information for Aeroplanes Means of Compliance for a design approval must seek guid- ance from their respective oversight authority (for example 3.Terminology published guidance from applicable civil aviation authorit...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F3064/F3064M-20 INTERNATIONAL Standard Specification for Aircraft Powerplant Control Operation and Indication This standard is issued under the fixed designation F3064/F3064M;the number immediately following the designation indicates the year of original adoption or in the case of revision.the year of last revision.A number in parentheses indicates the year of last reapproval. A superscript epsilon (s)indicates an editorial change since the last revision or reapproval. 1.Scope 2.Referenced Documents 1.1 This specification covers minimum requirements for the 2.1 ASTM Standards:2 control indication and operational characteristics of propul- F3060 Terminology for Aircraft sion systems.It was developed based on propulsion system F3062/F3062M Specification for Aircraft Powerplant Instal- installed on aeroplanes but may be applicable to other appli- lation cations as well. F3063/F3063M Specification for Aircraft Fuel Storage and 1.2 The applicant for a design approval must seek the Delivery individual guidance to their respective CAA body concerning F3116/F3116M Specification for Design Loads and Condi- the use of this standard as part of a certification plan...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standardis.Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F3045-20 INTERNATIONAL Standard Test Method for Evaluation of the Type and Viscoelastic Stability of Water-in- oil Mixtures Formed from Crude Oil and Petroleum Products Mixed with Water This standard is issued under the fixed designation F3045:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope 2.Summary of Test Method 1.1 This test method covers a procedure to determine the 2.1 Oil is mixed with 33 %%(3.3 %saline water for 12 h in water-in-oil emulsification tendencies and stabilities in the a standard rotating apparatus.The resulting mixture is charac- laboratory.The results of this test method can provide oil terized after this shaking period. behavior data for input into oil spill models. 2.2 The resulting mixture as created in step 2.1 is charac- 1.2 This test method covers a specific method of determin- terized visually by measuring water content and by rheological ing emulsion tendencies and does...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F3020-20 INTERNATIONAL Standard Performance Specifications and Test Methods for Hand-Worn Metal Detectors Used in Safety and Security This standard is issued under the fixed designation F3020:the number immediately following the designation indicates the year of original adoption or.in the case of revision.the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (g)indicates an editorial change since the last revision or reapproval. 1.Scope 1.4 This standard does not purport to address all of the 1.1 This standard applies to all hand-worn or glove-type safety concerns if any associated with its use.It is the metal detectors used to find metal contraband concealed or responsibility of the user of this standard to establish appro- hidden on people or other objects with hand-accessible sur- priate safety health and environmental practices and deter- faces.Hand-worn metal detectors (HWMDs)are significantly mine the applicability of regulatory limitations prior to use. different in design pared to the more mon hand-held 1.5 This international standard was developed in accor- metal detector (HHMD).For...

Development of International Standards, Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. This nternational standard was developed n acordan with nternationlly reogized priniples onstandardization stablished in the Deisinon Principlesfor the
Designation:F2979-20 INTERNATIONAL StandardGuidefor CharacterizationofWearfromtheArticulatingSurfacesin RetrievedMetal-on-MetalandotherHard-on-HardHip Prostheses' jo oq spu uoeusap o umo pmpou quu o 6L6 uou3sp pxy o apun pns s ppus su superscript epsilon (e) indicates an editorial change since the last revision or reapproval. original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A 1.Scopealthough the principles and techniques may be applicable to the 1.1 This standard guide provides options and a pendiumcharacterization of wear from the articulating surfaces. of information for measuring the bearing surface and estimat-1.6 This guide is intended as an extension to Practice F561 ing the in-vivo wear of explanted Metal-on-Metal (MoM) and as a Stage II nondestructive test. other “hard”(for example, ceramic) hip ponents.The1.7This standard may involve hazardous materials, guide covers the measurement of acetabular cups and femoral operations,and equipment.As a precautionary measure，ex- heads using a dimensional change method and is applicable to planted devices should be sterilized or disinfected by an all prosthetic hip types, including stemmed (modular) and appropriatemeansthat doesnot adverselyafecttheimplantor resurfacing hip systems. theassociatedtissuethat may bethe subjectofsubsequent 1.2 The methods specified in this guide are not applicableanalysis.A detailed discussion of precautions to beusedin for measuring the in-vivo wear from non-articulating surfaces, handling human tissues can be found in ISO 12891-1.This for example modular connections (at the stem/neck, neck/head, s...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F2905/F2905M-22 INTERNATIONAL Standard Specification for Crosslinked Polyethylene (PEX)Line Pipe For Oil and Gas Producing Applications' This standard is issued under the fixed designation F2905/F2905M:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval. A superscript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope* be used for metric sized pipe and metric sized fittings should not be used 1.1 This specification covers outside diameter controlled for IPS inch sized pipe. pressure rated metric-sized and inch-sized black or yellow 1.5 This standard does not purport to address all of the crosslinked polyethylene (PEX)pipe made in pipe dimension safery concerns if any associated with its use.It is the ratios ranging from 6 to 17.Included are requirements and test responsibility of the user of this standard to establish appro- methods for material workmanship dimensions burst priate safery health and environmental practices and deter- pressure hydrostatic sustained pre...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standartis.Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F2895-20 INTERNATIONAL Standard Practice for Digital Radiography of Cast Metallic Implants1 This standard is issued under the fixed designation F2895;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (s)indicates an editorial change since the last revision or reapproval. 1.Scope* E1030/E1030M Practice for Radiographic Examination of 1.1 This practice covers the procedure for digital radio- Metallic Castings graphic testing of cast metallic surgical implants and related E1316 Terminology for Nondestructive Examinations weldments. E1742/E1742M Practice for Radiographic Examination E2007 Guide for Computed Radiography 1.2 Digital X-ray is an alternative method for radiography E2033 Practice for Radiographic Examination Using Com- of cast metallic surgical implants and related weldments (see puted Radiography (Photostimulable Luminescence Practice F629). Method) 1.3 The values stated in either SI units or inch-pound units E2660 Digital Reference Images for Investment Steel Cast- are ...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F2854-20a An American National Standard INTERNATIONAL Standard Specification for Push-Fit Crosslinked Polyethylene (PEX)Mechanical Fittings for Crosslinked Polyethylene (PEX)Tubing' This standard is issued under the fixed designation F2854;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (s)indicates an editorial change since the last revision or reapproval. 1.Scope* 2.Referenced Documents 1.1 This specification covers crosslinked polyethylene 2.1 ASTM Standards:2 (PEX)push-fit mechanical fittings for use with crosslinked A269/A269M Specification for Seamless and Welded Aus- polyethylene (PEX)tubing in 4 1 and 1 /4 in.nominal tenitic Stainless Steel Tubing for General Service diameters that meet the requirements of Specification F876. A276/A276M Specification for Stainless Steel Bars and These fittings are intended for use in residential and Shapes mercial hot and cold potable water distribution systems as A312/A312M Specification for Seamless Welded and well as hydronic heati...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F2828-20 An American National Standard NTERNATIONAL Standard Test Method for Assessing Carpet Cleaning Effectiveness in Terms of Visual Appearance Change When Cleaned with a Wet Extraction Cleaning System This standard is issued under the fixed designation F2828:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope mendations issued by the World Trade Organization Technical 1.1 This test method provides only a laboratory test for Barriers to Trade (TBT)Committee. visually determining the relative carpet cleaning effectiveness of a wet extraction cleaning system when tested under standard 2.Referenced Documents conditions. 2.1 ASTM Standards:2 1.2 This test method is applicable to types of upright D6540 Test Method for Accelerated Soiling of Pile Yarn canister and bination wet extraction cleaners and their Floor Covering remended chemical cleaning formulas intended for clean- E177 Practice for Use of...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F2656/F2656M-20 NTERNATIONAL Standard Test Method for Crash Testing of Vehicle Security Barriers1 This standard is issued under the fixed designation F2656/F2656M:the number immediately following the designation indicates the year of original adoption or.in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval. A superscript epsilon (E)indicates an editorial change since the last revision or reapproval. INTRODUCTION Original perimeter barrier test methods were first published in 1985 by the Bureau of Diplomatic Security to assess the crash performance of perimeter barriers and gates.Since that time the frequency and scale of attacks using vehicles with or without an explosive payload have increased both internationally and domestically.Therefore there is a need to address a broad spectrum of possible incident conditions such as credible threat vehicle types for the locale attack velocities of the different vehicles and different acceptable penetration limitations.Also there are different evaluation criteria for different agencies that fulfill their unique access control operations aesthetics and oth...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standartis.Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F2648/F2648M-20 INTERNATIONAL Standard Specification for 2 to 60 inch [50 to 1500 mm]Annular Corrugated Profile Wall Polyethylene (PE)Pipe and Fittings for Land Drainage Applications This standard is issued under the fixed designation F2648/F2648M:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicares the year of last reapproval. A superscript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope* 1.7 This international standard was developed in accor- 1.1 This specification covers requirements and test methods dance with internationally recognized principles on standard- for annular corrugated profile wall polyethylene pipe and ization established in the Decision on Principles for the fittings with an interior liner.The inside diameters covered are Development of International Standards Guides and Re- 2to60in.[50to1500mm]. mendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. 1.2 The requirements of this specification are intended to provide non-pressure (g...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F2598-22 INTERNATIONAL Standard Consumer Safety Specification for Sealed Storage Chests such as Cedar Chests Hope Chests Blanket Chests Keepsake Chests This standard is issued under the fixed designation F2598:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (8)indicates an editorial change since the last revision or reapproval. INTRODUCTION This consumer safety specification addresses chest accidents that have been identified by the U.S. Consumer Product Safety Commission (CPSC). Products monly referred to as cedar chests hope chests blanket chests and keepsake chests have been in use for well over a century.A design characteristic of these products involves the necessity of a tight lid closure to create a sealed storage space for the prevention of insect infestation and dust or dirt contamination. Many of these products were originally equipped with locks or latching mechanisms that automatically engage when the lid is closed.These locks or latching mechanisms can only be r...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F2469-20 INTERNATIONAL Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method This standard is issued under the fixed designation F2469 the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope 3.Terminology 1.1 This test method covers the measurement of the optical 3.1 Definitions: angular deviation of a light ray imposed by flat transparent 3.1.1 angular deviation n-the angular displacement of a parts such as a mercial or military aircraft windshield light ray from its original path caused by non-parallelism of canopy or cabin window. opposite surfaces as it passes through a transparent material 1.2 The values stated in SI units are to be regarded as which is expressed in units of angle (degree minutes of arc standard.No other units of measurement are included in this milliradians)and is a function of the angle of incidence at each standard. s...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F2159-20 An American National Standard INTERNATIONAL Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring or Alternate Stainless Steel Clamps for SDR9 Crosslinked Polyethylene (PEX)Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT)Tubing This standard is issued under the fixed designation F2159:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope* are intended for use in general fluid transport including 1.1 This specification establishes requirements for sulfone hydronics and irrigations systems. plastic insert fittings and copper crimp rings or alternate 1.2 Included are the requirements for material molded part stainless steel clamps for four sizes Nominal Tubing Sizes properties performance workmanship dimensions and mark- (NTS)(3% 2 34 and 1)of cross-linked polyethylene (PEX)ings to be used on the fittings and rings. tubing that meet the requirements for Specificat...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F2033-20 INTERNATIONAL Standard Specification for Total Hip Joint Prosthesis and Hip Endoprosthesis Bearing Surfaces Made of Metallic Ceramic and Polymeric Materials1 This standard is issued under the fixed designation F2033;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript cpsilon (a)indicates an cditorial change sincc the last revision or rcapproval. 1.Scope concerns.Some manufacturing methods or designs may inten- 1.1 This specification covers the requirements for the mat- tionally reduce the diameter of the polymeric bearing to more ing bearing surfaces of total hip joint prostheses or resurfacing closely mate with the diameter of the head. hip devices intended for total hip arthroplasty:and hip 1.7 The values stated in SI units are to be regarded as the endoprostheses intended for hemiarthroplasty.More standard.The values given in parentheses are for information specifically this specification covers hip joint replacement of only. the ball-and-socket configuration. 1.8 This standard ...