This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standartis.Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E3005-20 TU INTERNATIONAL Standard Terminology for Body Armor' This standard is issued under the fixed designation E3005;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (s)indicates an editorial change since the last revision or reapproval. 1.Scope 3.Terminology 1.I The scope of this terminology is to provide a standard accessory n-a body armor ponent that is detachable or terminology for body armor providing protection against removable from the body armor and is intended to provide ballistic threats stabbing fragmentation blunt impact or a extended area of coverage protection against threats that may bination of threats. include ballistic threats stabbing fragmentation blunt ...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E2936-20 INTERNATIONAL Standard Guide for Contractor Self-Assessment for U.S.Government Asset Management Systems1 This standard is issued under the fixed designation E2936;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (e)indicates an editorial change since the last revision or reapproval. INTRODUCTION The purpose of this standard is to provide guidance for a Contractor Self-Assessment (CSA) program that addresses the requirement of Federal Acquisition Regulation (FAR)52.245-1(Govern- ment Property)that contractors perform periodic reviews surveillances self-assessments or audits. This guide is intended to assist contractors in developing a CSA program that provides reasonable assura...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E276-21 INTERNATIONAL Standard Test Method for Particle Size or Screen Analysis at 4.75 mm (No.4)Sieve and Finer for Metal-Bearing Ores and Related Materials' This standard is issued under the fixed designation E276:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (8)indicates an editorial change since the last revision or reapproval. 1.Scope 3.Terminology 1.1 This test method covers the determination of the particle 3.1 Definitions: size distribution by screen analysis dry or wet of metal- 3.1.1 For definitions of terms used in this test method refer bearing ores and related materials at 4.75 mm (No.4)sieve and to Terminology E135. finer. 1.2 Units-The values stated in SI units are to...

E2661/E2661M-201 NAS-410 NAS Certification and Qualification of Nonde- damage,growing flawsand friction-based sources.For addi structive Personnel(Quality Assurance Committee) tional information, see X1.3. SNT-TC-1A RemendedforPersonnel Qualification and 4.2 This practice provides an approach to determine the Certification of Nondestructive TestingPersonnel3 localregions of origin of the AE sources andany potential local 3. Terminology regions of large accumulation(s) of AE sources. 3.1 Definitions-See Terminology E1316 for general termi- 4.3 This practice can provide an approach to use AE-based nology applicable to this practice. criteria to determine the significance of flaws. 3.2 Definitions of Terms Specific to This Standard: 5. Significance and Use 3.2.1 characteristic damage state,n-transverse matrix cracking during the virgin loading of a posite;often 5.1 This AE examination is useful to detect micro-damage resulting in reaching a limit of the crack density prior to generation,accumulation,and growth of new orexisting faws. reaching failure. The examination is also used to detect significant existing 3.2.1.1 Discussion-Results in a reduction of stiffness of the damage from friction-based AE generated during loading or posite. For additional information, see X1.2. unloading of these regions. The damage mechanisms that can be detected include matrix cracking, fiber splitting,fiber 3.2.2fat panel posite,nany fiber reinforced pos- breakage,erpull-utbondingandlamination.During ite lay-up consisting of laminas (plies) with one or more loading,unloading,and load holding,damage that does not orientations with respect to some reference direction that result in a two-dimensionallyfat article of finite thickness (typically emit AE energy will not be detected. relatively thin). 5.2When the detected signals from AE sources are sufi- 3.2.3 plate-like posite,nany fiber-reinforced pos- ciently spaced in time so as not to be classified as continuous AE,this practiceis useful ...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standardis.Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E2649-20 TU INTERNATIONAL Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy This standard is issued under the fixed designation E2649:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope ization established in the Decision on Principles for the 1.1 This test method covers procedures for using a spark Development of International Standards.Guides and Re- emission spectroscope to determine the concentration of argon mendations issued by the World Trade Organization Technical gas in the space between the lites of a sealed insulating glas...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E2579-20 An American National Standard INTERNATIONAL Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics This standard is issued under the fixed designation E2579:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (s)indicates an editorial change since the last revision or reapproval. 1.Scope 1.10 This standard does not purport to address all of the 1.1 This practice describes procedures for specimen prepa- safery concerns if any associated with its use.It is the ration and mounting when testing wood products to assess responsibility of the user of this standard to establish appro- flames spread and smoke development as surfa...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E2534-20 INTERNATIONAL Standard Practice for Targeted Defect Detection Using Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts This standard is issued under the fixed designation E2534;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript cpsilon (a)indicates an cditorial change sincc the last revision or rcapproval. 1.Scope* 2.Referenced Documents 1.1 This practice describes a general procedure for using the 2.1 ASTM Standards:2 process pensated resonance testing (PCRT)via swept sine E1316 Terminology for Nondestructive Examinations input method for metallic or non-metallic parts to pare E2001 Guide for Resonant Ultrasound Spectroscopy for resonan...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E2296-21 INTERNATIONAL Standard Practice for Silver Corrections in Metal Bearing Ores Concentrates and Related Metallurgical Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry' This standard is issued under the fixed designation E2296:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope E882 Guide for Accountability and Quality Control in the 1.1 This practice covers the silver loss correction utilizing Chemical Analysis Laboratory slag recycling and cupellation of proof silver during the fire 2.2 ISO Documents:3 assay of metal bearing ores concentrates and related metal- ISO 35:2006 Certificatio...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E2295-21 INTERNATIONAL Standard Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores Concentrates and Related Metallurgical Materials by Silver Determination in Slags and Cupels This standard is issued under the fixed designation E2295:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope E50 Practices for Apparatus Reagents and Safety Consid- 1.1 This practice covers the determination of silver correc- erations for Chemical Analysis of Metals Ores and tions for fire assay of metal bearing ores concentrates and Related Materials related metallurgical materials using the spent slags and cu...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E2177-20 INTERNATIONAL Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings using the Bucket Method in a Condition of Wet Recovery This standard is issued under the fixed designation E2177;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript cpsilon (a)indicates an cditorial change sincc the last revision or rcapproval. 1.Scope 1.6 This standard does not purport to address all of the 1.1 This test method covers the measurement of the wet safety concerns if any associated with its use.It is the retroreflective (R properties of horizontal pavement marking responsibility of the user of this standard to establish appro- materials such as traffic stri...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E2016-20 NTERNATIONAL Standard Specification for Industrial Woven Wire Cloth1 This standard is issued under the fixed designation E2016;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (E)indicates an editorial change since the last revision or reapproval. INTRODUCTION Industrial wire cloth can be produced in many thousands of binations of size and shape of opening wire diameter type of weave and metal.This specification covers woven wire cloth for industrial use including the separation of particles.Its purpose is to introduce standard terms and definitions to note the normal range of specifications woven and to establish tolerances and requirements.This specification excludes siev...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standardis Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E1839-20 INTERNATIONAL Standard Practice for Efficacy of Slimicides for the Paper Industry-Bacterial and Fungal Slime This standard is issued under the fixed designation E1839;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope 2.2 TAPPI Standard: T 205 Forming Handsheets for Physical Tests of Pulp 1.1 This practice presents a procedure to evaluate the 2.3 CFR Standard: efficacy of slimicides for the control of bacterial and fungal 40 CFR Part 160 Good Laboratory Practice Standards slimes in paper mill systems and their counterparts. 1.2 It is the responsibility of the investigator to determine 3.Terminology...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standardis.Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E1740-20a An American National Standard INTERNATIONAL Standard Test Method for Determining the Heat Release Rate and Other Fire-Test- Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter This standard is issued under the fixed designation E1740;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (s)indicates an editorial change since the last revision or reapproval. INTRODUCTION This test method provides a means for measuring the fire-test-response characteristics of wall coverings ceiling coverings wall covering posites and ceiling covering posites using a bench-scale oxygen consumption calorimeter. 1.Scope* 1.7 This standard is used to...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standardis.Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E1728/E1728M-20 INTERNATIONAL Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination This standard is issued under the fixed designation E1728/E1728M:the number immediately following the designation indicates the year of original adoption or.in the case of revision.the year of last revision.A number in parentheses indicates the year of last reapproval. A superseript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope Development of International Standards Guides and Re- 1.1 This practice covers the collection of settled lead- mendations issued by the World Trade Organization Technical containing dust on surfaces using the wipe sampling method. Barriers to Trade (TBT)Committee. These samples are collected in a manner that will permit 2.Referenced Documents s...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standardis.Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E1606-20 INTERNATIONAL Standard Practice for Electromagnetic (Eddy Current)Examination of Copper and Aluminum Redraw Rod for Electrical Purposes' This standard is issued under the fixed designation E1606:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope* 2.Referenced Documents 1.1 This practice covers the procedures that shall be fol- 2.1 ASTM Standards:2 lowed in electromagnetic (eddy current)examination of copper E543 Specification for Agencies Performing Nondestructive and aluminum redraw rods for detecting discontinuities or Testing imperfections of a severity likely to cause failure or markedly E1316 T...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E1568-21 INTERNATIONAL Standard Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry This standard is issued under the fixed designation E1568:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (8)indicates an editorial change since the last revision or reapproval. 1.Scope erations for Chemical Analysis of Metals Ores and 1.1 This test method covers the determination of gold in Related Materials activated carbon by fire assay collection and gravimetric E135 Terminology Relating to Analytical Chemistry for measurement.It covers the range of 15 ug/g to 5000 ug/g gold. Metals Ores and Related Materials E173 Practice for Conducting Interlaboratory Studies of 1.2...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E1190-21 INTERNATIONAL Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members1 This standard is issued under the fixed designation E1190:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (8)indicates an editorial change since the last revision or reapproval. 1.Scope Building Constructions Elements Connections and As- 1.1 These test methods describe procedures for determining semblies the static axial tensile and shear strengths of power-actuated E631 Terminology of Building Constructions fasteners installed in structural members made of concrete E2265 Terminology for Anchors and Fasteners in Concrete concrete masonry and steel. and Masonry 2.2 ANSI Standard:3 1.2 These test methods are intended for use with fasteners ANSI A10.3 Safety Requirements for Powder-Actuated Fas- that are installed perpendicular to a plane surface of the tening Systems structural member. 1.3 Tests for bined tension and shear fatigue dynamic 3.Terminology and to...

This international standard was developed in accordanee with internationalyreognized principles on standardization established in the Decison on Principles for the Development of International Standards, Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation:D8436-22 INTERNATIONAL StandardSpecificationfor Fluoropolymer-basedMaterialsforUseforEncapsulationof DownholeCable1 jo eaf oq sajopu uogeu3(sap oqp Susooy <jpeipouul aqunu oq (9et8q uogeu3isap poxiy oq apun ponss! s! pmpueps suL original adoption o, in the case of revision, the year of last revision. A number in parenthees indicats the year of last reapproval. A superscript epsilon (e) indicates an editorial change since the last revision or reapproval. 1. Scopeization established in the Decision on Principles for the 1.1 This specification covers thermoplastic fluoropolymer-Development ofInternationalStandards,Guidesand Re- based materials, intended for use as an encapsulation material mendationsissued by theWorld Trade Organization Technical for downhole cables used during well pletion by the Barriers to Trade (TBT) Committee. petroleum and natural gas industries.2.Referenced Documents 1.2 The fluoropolymers covered by this specification in-2.1 ASTM Standards:2 clude but are not limited to the following: ethylene tetrafluo- D543 Practices for Evaluating the Resistance of Plastics to roethylene (ETFE),polyethylene chlorotetrafluoroethylene Chemical Reagents (ECTFE), fuorinated ethylene propylene (FEP), polyvi-D618Practice for Conditioning Plastics for Testing nylidene fluoride (PVDF), copolymers of PVDF, polychloro- D638Test Method forTensileProperties ofPlastics trifluoroethylene (PCTFE),polytetrafluoroethylene (PTFE), D883Terminology Relating toPlastics and perfluoroalkoxy alkane (PFA). D975 Specification for Diesel Fuel 1.3 This specification establishes mon temperature rat-D1708 Test Method for Tensile Properties of Plastics by Use...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:D8428-21 INTERNATIONAL Standard Guide for Establishing Analyst Competence to Perform a Test Method1 This standard is issued under the fixed designation D8428:the number immediately following the designation indicates the year of original adoption or.in the case of revision.the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (s)indicates an editorial change since the last revision or reapproval. 1.Scope 2.Referenced Documents 1.1 This guide covers general guidance on assessing the 2.1 ASTM Standards:2 petence of an analyst to perform a specific test method for D6299 Practice for Applying Statistical Quality Assurance a specific product or set of products (for example light and Control Charting Techniques to Evaluate Analytical distillates).It also provides guidance on some of the possible Measurement...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:D8257/D8257M-22 INTERNATIONAL Standard Specification for Mechanically Attached Polymeric Roof Underlayment Used in Steep Slope Roofing' This standard is issued under the fixed designation D8257/D8257M:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope Shingles Used in Roofing and Waterproofing 1.1 This specification addresses mechanically attached D751 Test Methods for Coated Fabrics polymeric roof underlayment used in steep slope roofing. D1079 Terminology Relating to Roofing and Waterproofing D1204 Test Method for Linear Dimensional Changes of 1.2 The objective of this specification is to provide a Nonrigid...