BS 5944-5-1992 Measurement of airborne noise from hydraulic fluid power systems and components..pdf

noise,Part,Pressure,pump,test,国外及港澳台标准
文档页数:12
文档大小:1.29MB
文档格式:pdf
文档分类:国外及港澳台标准
上传会员:
上传日期:
最后更新:

Measurementofairbornenoisefrom hydraulicfluidpowersystems andponents

BritishStandard

Part5.Simplifiedmethodofdeterminingsoundpowerlevelsfrompumpsusingananechoicchamber

Mesurage du brult aerien emis par les transmissions hydrauliques Partie5.Methode smplifeededeterminetiondesniveauxdepuisanceacoustique dubruit6mispar les pompes dans une chambre anechoique

Messung des Luftschalls von Hydraulikanlagen und-bestandteilenTeil 5.Vereinfachtes Verfahren zur Bestimmung der Schallpegel vonPumpen im schalltotem Raum

Foreword

Further Parts ere plenned.

of theMachinryand Components Standards Commltteeand is one of a group of Britih Standards rolatod to the measurement of noise emanating from hydraulic fluidpower systoms and ponents.

It is intended tht thstandard wilunity testin methods andonablth performancef diferent pums tobepared on a mon basis

Part 1 Method of test for pumpsPart3Gulde to theapplication of Part1andPart 2 Part 2 Method of test for motorsvalvas controlling flow and presure

Complince witha British Standard doesnot of itself confer immunity from logel obligations.

Contents

Mothod

Appendices

Tables

Fiqure

PageForword Committees responsible Inside front cover Back cover

0Introduction1Scope 2 Definitions4Toet onvironment 3 Mensurement uncertainty6Irstallation conditions for pump 5Instrumentation8 Location and number of sound measuring 7Operating oonditionsod6 polnts10 Calculation of pump mean sound pressure levels11 Calculationof mean sound prsure levelat and sound power levels12 Information to be recorded roferenco distanca13 Test report

A Errors and classes of measuremantBReference dimensions axes and location ofCCorrections for pump sound power level D Calculation of mean sound pressure level at a sound measuring pointsreference distance

1 Standard deviation of sound power level determination2 Allowable varietions in test conditions 3 Permissible systematic arrors of measuring4Coordinates of microphone focations instruments as determined during calibration

1 Key reference axes and dimensions

Method

0Introduction

In hydrauliflud powrsystempower trensittd ndcontrolled throughaliquid under pressure nalosed cirouit. Pumps are ponents which convert rotaryconvertingmechanicalpowrintohydraulifludpower mechenicel power into fluid power. During the process ofairborne noise fluid-borne vibrations and structure-borne vibrations are radiated from the pump.

The airborne noiso lovel of a hydraullc fluld power pump isan mportant consideration in ponent selection.Thenoisemeasurement techniqu should threforeee noise levelsThe determination of noise levels is pticatedby the interactions which occur during noise'moasuremont. The fluld-borne and structure-borne vibrations from thepump can be transmitted to the circult and ultimately give riso to baokground airborne noise levels which could affectthe dtemination of the pump airborne noise levels

The procedures desoribed in this Part of BS 6044 areIntended to measure only the airhorne noise radiated directly from the pump under test.

Thls standard closely follows the methods described inpump mounting and drivo oonfigurations which are simpler BS 5044 : Part 1 end Pert 2 but allows the use of alternatlveand cheaper to implement in an anechoic chamber. Much of the guldance glven In BS 5944 : Part 3 Is equally applicablesurficiently accurate n industrial terms forfrequency A to thie standardThe data obtained hes boen shown to beweighted octave and 1/3 octave noise measurements

1 Scope

This Part of BS 5944 desoribes prooedures for thedeterminationof the sound power lovels of ahydraulie fluidandopratinsuitableforprovidingbsformpringthe noise levels of pumps in terms of:

[a) A-weighted sound power level;

(b) oetavo band sound power lovels.

Fromthunpowrleelodpsurelevemay be caleulated for reporting purposos (see clause 11).

includes the ootave bands with contre frequencies between125 Hz and 8000 Hz.

This method isappllcable to all types of hydrauli fluid power pumps operating under steady-state conditions irretpetivfizxptfornyliittonsmosdb the size of the test environment (se clause 4).

NOTE The titles of the pulicetions referred to in this standard are lirtod on tho inside baok cover.

2 Definitions

givenin BS661apply together with thefollowing. For the purposes of this Part of BS 5944 the detinitions

2.1 free sound fleld. A sound field produced in a homogeneous isotropie medium free of boundaries

NOTEprtitifldinwhh tfftf thbndriare negllgtble over the frequency renge of Interest.

2.2frefildovrrflotingplaneAfild produd bsource in the presence of one reflecting plane on which the source ls located

2.3fr-fild vrtwrefltingplenAfildproduedbyasouroeinthe pesene of twomutuallyperpendieular reftecting planes

2.4anechoi room.A test room heving boundaries whichabsorbessentiallyalloftheincidentsoundenergyoverth frequency range of Interest thereby affording free-fieldconditions over the measurement surface.

2.5 mean-square sound pressure.The sound pressureaveraged in space and time on a mean-square basis.NOTEnpractiethissestimatedbyspece ndtmeaeraing

uxqnoo danopositions.

2.6mean sound presuro leval(L).Tontimosthelogarithmpressure to the square of the reforence sound pressure Indecibels (dB).

NOTEThwhnrrtwh hfqdused shuldwsnlced;frxamleAwgted soundpresure leyel octave band sound pressure levol. The reference sound presure is 20 μPs

2.7 sound power level (L.w1. Ten times the logarithm to the base 10 of the ratio of a given sound power to the referencesound power in decibels (dB)

NOTEwikwf tused shouldalwysbe indicated. The reterence sound power is 1 W.

2.8 volume of soureo undr tt.The volume of theenvelope of the whole pump under test.

3Measurement uncertainty

specified in 4.1 use methods of meaturement which tend With the cxcoption of the measurement environmentthen those given in table1.Tomeet thisrequirement the to resut In standard devlations which are equal to or lessengineering methods givn n clause 4 and appendix Aof BS 4196 : Part 4 : 1981 shall be used.

4Testenvironment

4.1 Conduet the tests in en environment generally inwhich providesfree-fletdconditlonsovertwomutually accordance with that described in BS 4196 : Part 4 andperpendioulrrfletingplnestlstnefwhich extends beyond the projected area of the miorophonemeasuring array.

NOTteeinucewisullyeobyanabustinlure er thepumpmounting mayallef required.

Table 1. Standerd deviation of sound powerloveldeterminationpnuao pug mn on frequeney of Standerd deviationHe dB125 5.0250 009 3.0 2.01000 to 4000 8000 2.0 3.0NOTE 1 Th standerd dvitr i thffetfallowable variations in the positioning of the meesurement points and in the lectin of ony precribsd maturement surfacebtxctudrtnthsoudwertof the couree from test to test.NOTE2.The Awelghed sound ower leve will inmost practic bedetermind withtndard dviatinf approximately 2 d8.

4.2Calibrete the ecoustie tost onvironment thus formed bythe substitution technique.

NOTEA referance sound source meeting the requirements ofBG 4196 : Pert 00* may be uied for eelibration purposos.

Ascertain the environmental corrections for och froqueneyband of interest (seo 10.4).

5Instrumentation

5.1 Use instrumentation to measure ftuid flow fluldpressurepumppeedandfuid tmperaturenordnce with the remendations forindustrial clast'accuracy oftesting i.e. class C given in appendix A.

5 2Use type2instrumentforacousticalmesurementsn sccordance with BS 6069 This instrumentation shall be inaccordancewithBS4196:Part4for both performance and calibration.

6Installation conditionsfor pump

6.1 Pump loeation

Locate the pump withitsmounting flango flush with one reflotinglaArrange thescondreflctinglne tpracticable intersect the first at right angles as close to the pump as

6.2 Pump mounting

6.2.1Ue amethod of mounting the pump thet wilminimiz the noise radiated as aresult of pump vibrations.

6.2.2 Construct the mounting bracket of high dampingmaterial or with sound damping and sound insulating material applied to the bracket as required.

6.2 3If necessary emly vibratin isolation technlqus even if the pump Is securely mounted.

6.3 Pump drive

Looete the drivemotor utside the test pace and drive thpump through flexible couplings and an intermediate shaft or Isolate the motor In an acoustic enclosure.

6 4 Hydraulic eireuit

6.4.1 Include n the circult alloll ittersoil coolers ses su doqdnd reservoirs and restrictor valves as required to meot tho

6.4 2 Use test ftuid and filtration In accordance with themanufacturer's remendetions.

6 4.3 Install inlet and discharge lines having bores inExerclsextacarewhnemblinginletlines toprevent accordance with the manufacturer's remended practice.eir leeking into the circuit

6.4.4 Mount the inlet pressure gauge at the same helght as theinletfitting ralbrate foreyheight differene

6.4.5 Select the lengths of pipe between the pump and thedischarge line which can increase the sound radlated from load valve which minimize satting up standing waves in thethe pump.

NOTE. It has been found thet leng length of hydreuli hose canminimlze standing weve erfects.

6.4.6 Uso a stable load valve.

NOTE Unatable load valvet in the discharge line can generate andtransmlt nolse through the fluld end piping whih ce emere s airborne sound at the pump.

pump preferably outside the testroom tominimize 6.4 7 Position the load vaive es.far as possible from thewhen adequate control of its acoustic performence cen be interaction. Locate the load valve close to the pump onlyprovided.

6.4.8 Enclose allfluid lines and load valves in the test space within acoustic ducts an enclosures as required to meetthe speified bckground noiso supprelon (s 9.1) Use enclosures having a sound transmission loss of at least*sa[uanbauj Jau6ju 1e sso aaneauf pue zH GZ1 1e gp 01

7Operating conditions

7.1 Determine the sound power levels of the pump for any

desired set of operation conditions (see 10.4).

7.2Maintinths test conditions during the test within the limits given in table 2.

7.3Test the pump in thes deliveredondition togetherwithanyintralnillrypumpsandvalvesoprating normally during the test so as to include their noisecontributions to the alrborne nolse tevel of the pump.

资源链接请先登录(扫码可直接登录、免注册)
①本文档内容版权归属内容提供方。如果您对本资料有版权申诉,请及时联系我方进行处理(联系方式详见页脚)。
②由于网络或浏览器兼容性等问题导致下载失败,请加客服微信处理(详见下载弹窗提示),感谢理解。
③本资料由其他用户上传,本站不保证质量、数量等令人满意,若存在资料虚假不完整,请及时联系客服投诉处理。
④本站仅收取资料上传人设置的下载费中的一部分分成,用以平摊存储及运营成本。本站仅为用户提供资料分享平台,且会员之间资料免费共享(平台无费用分成),不提供其他经营性业务。
投稿会员:匿名用户
我的头像

您必须才能评论!

手机扫码、免注册、直接登录

 注意:QQ登录支持手机端浏览器一键登录及扫码登录
微信仅支持手机扫码一键登录

账号密码登录(仅适用于原老用户)