This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F1667/F1667M-21a INTERNATIONAL Standard Specification for Driven Fasteners:Nails Spikes and Staples1 This standard is issued under the fixed designation F1667/F1667M:the number immediately following the designation indicates the year of original adoption or.in the case of revision.the year of last revision.A number in parentheses indicates the year of last reapproval. A superseript epsilon (e)indicates an editorial change since the last revision or reapproval. The Commereial and Government Entiry (Cage)Code for ASTM:81346. 1.Scope* 2.Referenced Documents 1.1 This specification covers nails spikes staples and other 2.1 ASTM Standards:2 driven fasteners as listed in Table I. A153/A153M Specification for Zinc Coating (Hot-Dip)on Iron and Steel Hardware NorE 1-Fastener ductility information is presented in Table 2 and A641/A641M Specification for Zinc-Coated (Gal...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standartis.Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F1611-20 INTERNATIONAL Standard Specification for Intramedullary Reamers This standard is issued under the fixed designation F1611;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (s)indicates an editorial change since the last revision or reapproval. 1.Scope F983 Practice for Permanent Marking of Orthopaedic Im- 1.1 This specification provides requirements for material plant Components dimensions and tolerances finish and marking and care and F1264 Specification and Test Methods for Intramedullary handling for reamers intended to cut a cylindrical path along Fixation Devices the medullary canal of diaphyseal bone. 3.Terminology 1.2 Intramedullary reamers are monly used to prepare...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F1575/F1575M-21 INTERNATIONAL Standard Test Method for Determining Bending Yield Moment of Nails1 This standard is issued under the fixed designation F1575/F1575M:the number immediately following the designation indicates the year of original adoption or.in the case of revision.the year of last revision.A number in parentheses indicates the year of last reapproval. A superscript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope* 3.Terminology 1.1 This test method covers procedures for determining the 3.1 Definitions of Terms Specific to This Standard: bending yield moment of nails when subjected to static 3.1.1 bending yield moment-the moment determined from loading.It is intended only for nails used in engineered the load-deformation curve that is intermediate between the connection applications in which a required conne...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F1554-20 INTERNATIONAL Standard Specification for Anchor Bolts Steel 36 55 and 105-ksi Yield Strength1 This standard is issued under the fixed designation F1554:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope* 2.Referenced Documents 1.1 This specification covers straight bent headed and 2.1 ASTM Standards:2 headless anchor bolts (also known as anchor rods)made of A6/A6M Specification for General Requirements for Rolled carbon medium carbon boron alloy or high-strength low- Structural Steel Bars Plates Shapes and Sheet Piling alloy steel.It provides for anchor bolts in three strength grades A194/A194M Spec...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F1472-20a INTERNATIONAL Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)1 This standard is issued under the fixed designation F1472:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope* E1447 Test Method for Determination of Hydrogen in Tita- 1.1 This specification covers the chemical mechanical and nium and Titanium Alloys by Inert Gas Fusion Thermal metallurgical requirements for wrought annealed titanium- Conductivity/Infrared Detection Method 6aluminum-4vanadium alloy (UNS R56400)to be used in the E1941 Test Method for Determination of Carb...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F1359/F1359M-22 INTERNATIONAL Standard Test Method for Liquid Penetration Resistance of Protective Clothing or Protective Ensembles Under a Shower Spray While on a Manikin This standard is issued under the fixed designation F1359/F1359M:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval. A superscript epsilon (e)indicates an editorial change since the last revision or reapproval. INTRODUCTION Personnel in industry and emergency response can be exposed to numerous liquids capable of causing harm upon contact with the human body.These liquids may include chemicals contaminated blood or body fluids and other hazardous liquids.The deleterious effects of different chemicals can range from acute trauma such as skin irritation and burn to chronic degenerative disease such as cancer.Biological-based hazard liquids may include various liquid-borne pathogens capable of causing infection directly or with non-intact skin.Since engineering controls cannot eliminate all possible exposures attention is often placed on reducing the potential for direct skin contact through the use of protective clothing. Protective clothing is available in a variety of constructions configurations and materials and is designed to provide various levels of protection against many hazards.Protective clothing offering the highest level of chemical protection is constructed to prevent any contact of solid liquid or gaseous chemicals with the wearer.Test Method F1052 evaluates the integrity and construction of the vapor protective...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F1356-22 INTERNATIONAL Standard Guide for Irradiation of Fresh Frozen or Processed Meat and Poultry to Control Pathogens and Other Microorganisms' This standard is issued under the fixed designation F1356:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (8)indicates an editorial change since the last revision or reapproval. INTRODUCTION The purpose of this guide is to present information on the use of ionizing radiation in treating fresh frozen or processed meat and poultry products to eliminate or reduce the numbers of vegetative pathogenic microorganisms and parasites and to extend the refrigerated shelf-life of those products by reducing the numbers of spoilage microorganisms. Thi...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F1250-20 An American National Standard INTERNATIONAL Standard Specification for Stationary Upright and Recumbent Exercise Bicycles and Upper and Total Body Ergometers' This standard is issued under the fixed designation F1250;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (s)indicates an editorial change since the last revision or reapproval. INTRODUCTION The goal of this specification is to promote proper design and manufacturing practices for stationary upright and recumbent exercise bicycles and ergometers.Through these specifications this specifi- cation aims to assist designers and manufacturers in reducing the possibility of injury when these products are used in accordance wit...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standartis.Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F1165-20 INTERNATIONAL Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts This standard is issued under the fixed designation F1165:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope E691 Practice for Conducting an Interlaboratory Study to 1.1 This test method covers measuring the angular separa- Determine the Precision of a Test Method tion of secondary images from their respective primary images as viewed from the design eye position of an aircraft transpar- 3.Terminology (see Fig.I) ency.Angular separation is measured at 49 points within a 20 3.1 angular displa...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F1148-20 NTERNATIONAL Standard Consumer Safety Performance Specification for Home Playground Equipment This standard is issued under the fixed designation F1148:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (E)indicates an editorial change since the last revision or reapproval. 1.Scope 1.3 Methods of identifying products that ply with this 1.1 This consumer safety specification provides safety re- consumer safety specification are given.The illustrations of quirements for various types of home playground equipment home playground equipment shown in Figs.A1.1-A1.4 are for intended for use by children aged from over 18 months through informational purposes only and are not intended...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standartis.Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F1091-20 INTERNATIONAL Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy Surgical Fixation Wire (UNS R30605) This standard is issued under the fixed designation F1091;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope* Determine Conformance with Specifications 1.1 This specification covers the chemical mechanical and F86 Practice for Surface Preparation and Marking of Metal- metallurgical requirements for the manufacture of wrought lic Surgical Implants cobalt-20chromium-15tungsten-10nickel surgical fixation F90 Specification for Wrought Cobalt-20Chromium- wire. 15Tungsten-10Nick...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E561-21 INTERNATIONAL Standard Test Method for Ka Curve Determination' This standard is issued under the fixed designation E561:the number immediately following the designation indicates the year of original adoption or.in the case of revision.the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (s)indicates an editorial change since the last revision or reapproval. 1.Scope* Development of International Standards Guides and Re- 1.1 This test method covers the determination of the mendations issued by the World Trade Organization Technical resistance to fracture of metallic materials under Mode I Barriers to Trade (TBT)Committee. loading at static rates using either of the following notched and 2.Referenced Documents precracked specimens:the middle-cracked tension M(T)speci- men or the pact tension...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E542-22 INTERNATIONAL Standard Practice for Gravimetric Calibration of Laboratory Volumetric Instruments This standard is issued under the fixed designation E542:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (8)indicates an editorial change since the last revision or reapproval. 1.Scope 1.4 This standard may be used for the calibration of volu- 1.1 This practice covers procedures for use in the calibration metric instruments made from materials of glass plastic of volumetric instruments that include glassware plasticware various stable metals or any other stable materials provided appropriate volumetric coefficients of expansions are available. and laboratory standards that are in...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E3334-22 INTERNATIONAL Standard Test Method for Acidity in Ethanol and Ethanol Solutions1 This standard is issued under the fixed designation E3334:the number immediately following the designation indicates the year of original adoption or in the case of revision.the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (s)indicates an editorial change since the last revision or reapproval. 1.Scope 2.Referenced Documents 1.1 This test method covers the determination of acidity as 2.1 ASTM Standards:2 acetic acid in ethanol and ethanol solutions.This test method D770 Specification for Isopropyl Alcohol may be applied to ethanol samples containing very little water D1193 Specification for Reagent Water (dehydrated alcohols)to solutions with significant water (low D7795 Test Method for Acidity in Ethanol and Et...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E3311/E3311M-21 INTERNATIONAL Standard Test Method for Evaluating Response Robot Mobility Using Variable Diagonal Rail Obstacles1 This standard is issued under the fixed designation E3311/E3311M:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval. A superscript epsilon (e)indicates an editorial change since the last revision or reapproval. INTRODUCTION The robotics munity needs ways to measure whether a particular robot is capable of performing specific missions in plex unstructured and often hazardous environments.These missions require various binations of elemental robot capabilities.Each capability can be represented as a test method with an associated apparatus to provide tangible challenges for various mission requirements and performance metrics to municate results.These test methods can then be bined and sequenced to evaluate essential robot capabilities and remote operator proficiencies necessary to successfully perform intended missions. The ASTM International Standards Committee...

This internationl standard was developed in accordance with internationally recognized principles on standardization established in the Deision onPrinciples for the Development of International Standards, Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. Designation:E3310/E3310M-21 INTERNATIONAL StandardTestMethodfor EvaluatingResponseRobotMobilityAcrossParallel Rails1 Thisstadd isiddsinati33M; tditlyfolwndigndica oforiglir,nt casef reisn, th yar f last rvin.An in path inicas th af larpl. A superscript epsilon (e) indicates an editorial change since the last revision or reapproval. INTRODUCTION The robotics munity needs ways to measure whether a particular robot is capable of performing specific missions in plex,unstructured,and often hazardous,environments.These missions require various binations of elemental robot capabilities.Each capability can be represented as a test method with an associated apparatus to provide tangible challenges for various mission requirements and performance metrics to municate results. These test methods can then be bined and sequenced to evaluate essential robot capabilities and remote operator proficiencies necessary to successfully perform intended missions. The ASTMIntermational Standards Committe on HomelandSecurity Applications (E54) specifies these standard test methods to facilitate parisons across different testing locations and dates for diverse robot sizes and configurations.These standards support robot researchersmanufacturersand user organizations in different ways. Researchers use the standards to understand mission requirements,encourage innovation,and demonstrate break-through capabilities.Manufacturers use the standards to evaluate design decisions,integrate emerging technologies,and harden systems. Emergency responders and soldiers use them to guide purchasing decisions, align deployment expectations,and focus training with standard measures of operator profici...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E3241-20 INTERNATIONAL Standard Guide for Coordination and Cooperation between Facilities Local Emergency Planning Committees and Emergency Responders This standard is issued under the fixed designation E3241;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript cpsilon (a)indicates an cditorial change sincc the last revision or rcapproval. 1.Scope stakeholders in the preparedness planning process and each 1.1 This guide covers new and anticipated state and federal munity needs to think expansively when inviting partici- pants to the process. regulatory programs that create an obligation to“coordinate and cooperate"on emergency preparedness planning between 1.2 This standard does not purport to ...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E3240-20 NTERNATIONAL Standard Guide for Risk-Based Corrective Action for Contaminated Sediment Sites This standard is issued under the fixed designation E3240:the number immediately following the designation indicates the year of original adoption or.in the case of revision.the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (e)indicates an editorial change since the last revision or reapproval. INTRODUCTION This guide provides a framework for the development of a Risk-Based Corrective Action (RBCA) process for contaminated sediment sites (Sediment-RBCA)that integrates ecological and human health risk-based decision making into the corrective action process.Sediment-RBCA guide parallels the RBCA frameworks in Guides E2081 and E2205/E2205M with respect to the tiered approach for data gathering evaluati...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E3236/E3236M-20 INTERNATIONAL Standard Specification for Ballistic-resistant Barriers Used in Homeland Security or Public Safety Applications This standard is issued under the fixed designation E3236/E3236M:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval. A superscript epsilon (a)indicates an editorial change since the last revision or reapproval. 1.Scope 1.5.1 Stand-alone Products-Test items shall be shoot 1.1 This specification specifies requirements for ballistic- packs armor coupons or actual products mounted in a test resistant barriers to be used in homeland security or public fixture with air backing. safety applications for protection against plete penetration 1.5.2 In Conjunction Products-Test ...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standartis.Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E3234-20 INTERNATIONAL Standard Practice for Forensic Paint Analysis Training Program This standard is issued under the fixed designation E3234;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (s)indicates an editorial change since the last revision or reapproval. 1.Scope end of the paint analysis training program the trainee is 1.I This document is intended as a practice for use by capable of forming opinions based upon sound scientific laboratory personnel responsible for training examiners to knowledge appropriate examinations and practical experi- perform forensic examinations and parisons of paint.It ence.The trainee also is able to independently work cases contains a list of...