单层厂房结构钢结构施工全过程 一、钢结构厂房结构的组成 屋脊 保温层 采光带 屋面彩钢板 屋脊盖板 屋面C型檬条 屋面钢梁 墙面复合板 钢楼梯 钢柱 山墙屋顶 天车轨道 连接柱间支撑 山墙抗风柱山墙条 墙条 橡口檬条 山墙角柱 钢结构厂房的建造主要分以下五部分： 1、预埋件，（能稳定厂房结构） 2、柱子，一般用H型钢，或者C型钢 (通常是用角钢把两根C型钢连接) 3、梁，一般都用C型钢和H型钢， (中间积的高度根据梁的跨度来定) 4、支撑、拉条，通常是圆钢. 5、瓦，分两种，第一种是单片瓦（彩 钢瓦).第二种是复合板.（两层瓦中间 搁着泡沫起到冬暖夏凉的作用，也有隔音 的效果). ...

浙江分公司技术质量部管理交底 中建五局华东建设有限公司 CHINA CONSTRUCTION FIFTH ENGINEERING DIVISION EAST CHINA CO. 目录 项目指 公司制 线条管理， 工作部署 标要求 度宣贯 资料上报 等要求 01 02 03 04 中建五局华东建设有限公司 CHINA CONSTRUCTION FIFTH ENGINEERING DIVISION EAST CHINA CO 第一部分 工作部署 中建五局华东建设有限公司 CHINA CONSTRUCTION FIFTH ENGINEERING DIVISION EAST CHINA CO ...

合同编号： 城市更新单元 合作框架协议书 甲方： 乙方： 1 城市更新单元 合作框架协议书 甲方： 股份合作公司 法人代表： 地址： 电话： 乙方： 法人代表： 地址： 电话： 为了改善 的整体形象，提高片区人居环境，本着可持续发展的理念， 根据《深圳市城市更新办法》等法律法规及政策之规定，双方在平等、互利的基础上 经友好协商，就乙方独家实施对片区的整体更新改造项目（下称“本项 目”)的相关事宜达成本协议条款如下： 2 第一条项目概况 1.1本项目位于（东至一，西至，南至一北至 ) 本项目搬迁用地面积约平方米，可建设用地约平方米，本项目合作具 体范围以加盖甲方公章的更新范围图为准（详见附件1，最终以政府审批为准），可 建设用地面积以政府最终专项规划审批为准. 1.2本项目现状建筑面积约平方米（最终以项目实际测绘面积为准），其 中约平方米厂房为甲方物业，该物业为甲方出资建设、出租及拥有的工业厂房 甲方工商类非农建设用地（指标）约平方米（以政府部门批文为准）. 1.3本项目具有合法权属的“五类”用地况： 1.4甲方同意将其在本项目范围内的土地、物业及平方米工商类非农建设 用地指标用于本项目进行更新改造. 1.5本项目补偿所涉面积以符合政府资质要求的第三方机构的测量数据为准. 第二条双方确认的合作前提 2.2本项目获得深圳市政府城市更新项目的批准，并享受改造的相应优惠政策 2.2本项目不存在可能影响乙方正常开发的政策方面的限制. 3 ...

BRITISHSTANDARD BS EN
14398-3:2003 Incorporating Amendment No.1
Cryogenic vessels Large transportable non-vacuuminsulated vessels
Part3:Operationalrequirements
amendment A1:2005, has the status of a British Standard The European Standard EN 14398-3:2003, with the incorporation of
IC8 23.020.40
BSi NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BritishStandards
BSEN 14398-3:2003
Nationalforeword EN 14398-3:2003, including amendment A1:2005. This British Standard is the official English language version of 3B The start and finish of text introduced or altered by CEN amendment is indicated in the text by tags E@.Tags indicating changes to CEN text carry amendment A1 is indicated by the number of the CEN amendment.For example, text altered by CEN Copy, PVE/18,Cryogenic vessels which has the responsibility to: The UK participation in its preparation was entrusted to Technical Committee aid enquirers to understand the text; Uncontrolle present to the responsible international/European mittee any enquiries on the nterpretation,or proposals for change,and ke UK interests informed; promulgate them in the UK. monitor related international and European developments and 2006,
request to its secretary. A list of organizations represented on this mitee can be obtained on GMT+00:00 Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled International Standards Correspondence Index,or Standards Online. by using the“Search” facility of the BSI Electronic Catalogue or of British 102:01:48This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. 3from legal obligations. Compliance with aBritish Standard does not ofitself conferimmunity 0
effieldun, This Beritish Standard was ne a aapn p Summary of pages s Strategy Committee of the Standards Policy ...

BRITISH STANDARD BS EN 14398-2:2003 Incorporating corrigendum no.1 Cryogenic vessels- Large transportable non-vacuum insulated vessels- Part 2:Design fabrication inspection and testing The European Standard EN 14398-2:2003 has the status of a British Standard ICS23.020.40 BSi NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW British Standards BSEN14398-2:2003 National foreword This British Standard was published by BSI.It is the UKimplementation of EN 14398-2:2003 incorporating Corrigendum August 2006. The start and finish of text introduced or altered by CEN corrigendum August 2006 is indicated in the text by tags AC1)(AC1. The UK participation in its preparation was entrusted to Technical Committee PVE/18 Cryogenic vessels. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. Compliance with a British Standard cannot ofitself confer immunity from legal obligations. This British Standard was Amendments issued since publication published under the authority of the Standards Policy and Strategy Committee on Amd.No. Date Comments 3 September 2003 16821 29 December 2006 See national foreword Corrigendum No.1 BS12006 ISBN0580425649 EUROPEAN STANDARD EN14398-2 NORME EUROPEENNE EUROPAISCHE NORM August 2003 ICS23.020.40 Incorporating Corrigendum August 2006 English version Cryogen...

BRITISH STANDARD BS EN 14398-1:2003 Cryogenic vessels- Large transportable non-vacuum insulated vessels- Part 1:Fundamental requirements The European Standard EN 14398-1:2003 has the status of a British Standard ICS23.020.40 BSi British Standards BSEN14398-1:2003 National foreword This British Standard is the official English language version of EN14398-1:2003. The UK participation in its preparation was entrusted to Technical Committee PVE/18 Cryogenic vessels which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European mittee any enquiries on the interpretation or proposals for change and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this mittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled“International Standards Correspondence Index'" or by using the“Search'"facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. Compliance with a British Standard does not ofitself confer immunity from legal obligations. This British Standard was Summary of pages published under th...

BRITISH STANDARD BS EN 13555:2004 Flanges and their joints-Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections The European Standard EN 13555:2004 has the status of a British Standard ICS23.040.60:23.040.80 BSi British Standards BSEN13555:2004 National foreword This British Standard is the official English language version of EN13555:2004. The UK participation in its preparation was entrusted to Technical Committee PSE/2 Jointing materials and pounds which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European mittee any enquiries on the interpretation or proposals for change and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this mittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled“International Standards Correspondence Index'" or by using the“Search'"facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. Compliance with a British Standard does not ofitself confer immunity from legal obligations. This British ...

BSEN13445-4:2009 BSI British Standards Unfired pressure vessels- Part 4:Fabrication NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raising standards worldwide" BSi British Standards BSEN13445-4:2009 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 13445-4:2009. It supersedes BS EN 13445-4:2002A2:2006 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PVE/1 Pressure vessels. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. @BSI2009 ISBN9780580655654 ICS23.020.30 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2009. Amendments issued since publication Date Text affected EUROPEAN STANDARD EN13445-4 NORME EUROPEENNE EUROPASCHE NORM Juk 2009 S23.020.30 Supersedes EN 13445-12002 Eng lish Version U nfired pressure vesse ls -Part4:Fabrication Recp ients sous pression non soun is a a flam e -Parte 4 U nbe feuerte D ruckbehalar-Te il4:H erste lling abrcation This Eurmpean S tandard w as approved by CEN on 30 June 2009. CEN m em beis are bound t pk w ith the CEN CENELEC Inte malR eguatins w hich stipuhte the cond itions this Eurupean S tan...

2023年度分包指导价 建筑、安装、市政、钢结构专业 中建局安装工程有限公司 编制说明 1、本指导价是根据公司当前成熟的分包模式，风险最低的组价模式及具体项目的现场条件 编制的，是项目部、公司编制分包招标实物量清单、招标控制价、成本预算的基础与依据， 项目部、公司编制分包招标文件时，必须参照本指导价所列示的清单细目、清单特征描述、 分包内容、计算规则进行. 2、项目部在编制具体项目的实物量清单、分包招标控制价时，要根据具体项目的项目特 征、付款方式、子目控制指标、当地劳务市场行情及施工工期进行调整换算.其中： (1)具体项目特征不同时，按指导价要求及项目工程所使用定额规定的换算办法换算； (2)本指导价按过程中付款70%、完工支付85%、结算后支付95%的支付条件为基准，付款 方式不同时，项目依据自身的付款条件上浮或者下降对应的分包分供控制价. (3)控制指标不同时，根据项目实际控制指标调整劳务分包控制价格； (4)劳务分包控制价格存在较大地区差异，按照当地市场行情测算； (5)本指导价房建专业是按常规公建、住宅多层框架结构考虑，实际工程为其他类型及 复杂异形结构可单独测算. (6)本指导价清单中的税率按照一般增值税计算，非强制性要求，实际编制项目分包控 制价时，可根据项目税务策划及分包方纳税资格认定进行确定（简易计税项目按照合同约定 计取). 3、项目部在编制分包招标控制价时，其付款方式一般按照四个阶段约定分包付款方式 (这四个阶段分别为：进度款、完工验收退场、结算完、保修期满后)，付款节点不能超过 承包合同中约定节点，付款比例不能超过承包合同中约定比例. 4、项目部在编制具体项目的实物量清单、分包招标控制价时，各子目工程量计量单位与 计算规则要求与本指导价清单计算规则保持一致. 5、本指导价按增值税要求，实行价税分离模式. 6、本指导价未包含的工程细目，按承包合同清单细目编制，承包合同清单细目也未包含 的工程细目按工程所使用的定额编制实物清单，并根据当地劳务、材料市场价格和所使用定 额编制项目招标控制价. 其他说明事项： 安装公司2023年度分包信息指导价（营改增下）一房建及安装 单位：中建*局安装工程有限公司 河南地区 序号 项目名称 清单特征描述 计量单 位 工程量计算规则 分包内容 可抵扣增值税 费用内容（税前） 备注 不含税价 含税价 税率 税额 专业分包 1 钢构件制作 1.构件类型：H型钢柱；2.材质：Q235 其中人工费：384.8元，辅材 费：210元，机械费：354元， 1.1 H型钢柱制作 、Q3451Q355:3.焊缝等级：二级焊 1150 13% 149.5 1299.5 缝：4.除锈等级：不小于Sa2.5级 管理费、利润及其他：201.2元 1.构件类型：H格构柱：2.材质：Q235 其中人工费：482.3元，辅材 1.2 格构柱制作 Q345Q355;3.焊缝等级：二级焊 1350 13% 175.5 1525.5 费：249.6元，机械费： 缝：4.除锈等级：不小于Sa2.5级 366元，管理费、利润及其他： 252.1元. 1.构件类型：箱型钢柱：2.材质：Q235 其中人工费：482.3元，辅材 1.3 箱型柱制作 贵：249.6元，机械费： Q345Q355:3.焊缝等级：二级焊 t 1350 13% 175.5 1525.5 缝：4.除锈等级：不小于Sa2.5级 366元，管理费、利润及其他： 252.1元， 1.构件类型：十字型钢柱：2.材质： 其中人工费：755.3元，辅材 1.4 十字柱制作 0...

BSEN13445-3:2009 BSI British Standards Unfired pressure vessels- Part 3:Design NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raising standards worldwide BSi British Standards BSEN13445-3:2009 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 13445-3:2009. It supersedes BS EN 13445-3:2002A11:2006 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PVE/1 Pressure vessels. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. ©BSI2009 ISBN9780580655623 ICS23.020.30 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2009. Amendments issued since publication Date Text affected EUROPEAN STANDARD EN13445-3 NORME EUROPEENNE EUROPAISCHE NORM July 2009 ICS23.020.30 Supersedes EN 13445-3:2002 English Version Unfired pressure vessels-Part 3:Design Recipients sous pression non soumis a la flamme-Partie 3 Unbefeuerte Druckbehalter Teil 3:Konstruktion conception This European Standard was approved by CEN on 30 June 2009. CEN members are bound to ply with the CEN/CENELEC Intemal Regulations which stipulate the conditions for giving this European Standard...

BSEN13445-2:2009 BSI British Standards Unfired pressure vessels- Part 2:Materials NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raising standards worldwide BSi British Standards BSEN13445-2:2009 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 13445-2:2009. It supersedes BS EN 13445-2:2002A2:2006 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PVE/1 Pressure vessels. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. @BSI2009 ISBN9780580655609 ICS23.020.30 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2009. Amendments issued since publication Date Text affected EUROPEAN STANDARD EN13445-2 NORME EUROPEENNE EUROPASCHE NORM Juk 2009 S23.020.30 Supersedes EN 13445-22002 Eng lish Version U nfired pressure vesse ls -Part2:M aterials Recp ients sous pression non soun is a a flam e -Parte 2 Unbe uerte D ruckbehalter-Teil2:Werks toffe m a teriaux This Eurmpean S tandard w as approved by CEN on 30 June 2009. CEN m em beis are bound t pk w ith the CEN CENELEC Inte malR eguatins w hich stipuhte the cond itions this Eurupean S tandand th...

BSEN13445-1:2009 BSI British Standards Unfired pressure vessels- Part 1:General NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raising standards worldwide BSi British Standards BSEN13445-1:2009 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 13445-1:2009. It supersedes BS EN 13445-1:2002A3:2007 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PVE/1 Pressure vessels. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. @BSI2009 ISBN9780580655579 ICS23.020.30 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2009. Amendments issued since publication Date Text affected EUROPEAN STANDARD EN13445-1 NORME EUROPEENNE EUROPASCHE NORM Juk 2009 S23.020.30 Supersedes EN 13445-12002 Eng lish Version Unfired pressure vesse ls -Part1:G eneral Recpients sous pression non soun is a a fam e -Parte 1 nbe feuera D nuckbehalter-Te ill:A Ikrem enes generalites This Eurmpean S tandard w as approved by CEN on 30 June 2009. CEN m em beis are bound t pk w ith the CEN CENELEC Inte malR eguatins w hich stipuhte the cond itions this Eurupean S tandand the sta...

BRITISH STANDARD BS EN 12560-7:2004 Flanges and their joints Gaskets for Class-designated flanges- Part 7:Covered metal jacketed gaskets for use with steel flanges The European Standard EN 12560-7:2004 has the status of a British Standard ICS23.040.80 BSi British Standards BSEN12560-7:2004 National foreword This British Standard is the official English language version of EN12560-7:2004 The UK participation in its preparation was entrusted to Technical Committee PSE/2 Jointing materials and pounds which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European mittee any enquiries on the interpretation or proposals for change and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this mittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled“International Standards Correspondence Index'" or by using the“Search'"facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. Compliance with a British Standard does not ofitself confer immunity from legal obligations. This British Standard...

BRITISH STANDARD BS EN 12560-6:2003 Flanges and their joints Gaskets for class-designated flanges- Part 6:Covered serrated metal gaskets for use with steel flanges The European Standard EN 12560-6:2003 has the status of a British Standard ICS23.040.80 BSi British Standards BSEN12560-6:2003 National foreword This British Standard is the official English language version of EN12560-6:2003. The UK participation in its preparation was entrusted to Technical Committee PSE/2 Jointing materials and pounds which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European mittee any enquiries on the interpretation or proposals for change and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this mittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled“International Standards Correspondence Index'" or by using the“Search'"facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. Compliance with a British Standard does not ofitself confer immunity from legal obligations. This British Standar...

BRITISH STANDARD BS EN 12560-5:2001 Flanges and their joints Gaskets for Class-designated flanges- Part 5:Metallic ring joint gaskets for use with steel flanges The European Standard EN 12560-5:2001 has the status of a British Standard ICS23.040.80 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BSi BSEN12560-5:2001 National foreword This British Standard is the official English language version of EN 12560-5:2001.It supersedes BS 7076-2:1989 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PSE/2 Jointing material and pounds which has the responsibility to: aid enquirers to understand the text; present to the responsible European mittee any enquiries on the interpretation or proposals for change and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this mittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled“International Standards Correspondence Index'"or by using the“Find"facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract.Users of British Standards are responsible for their correct application. Compliance with a B...

BRITISH STANDARD BS EN 12560-4:2001 Flanges and their joints Gaskets for Class-designated flanges- Part 4:Corrugated flat or grooved metallic and filled metallic gaskets for use with steel flanges The European Standard EN 12560-4:2001 has the status of a British Standard ICS23.040.80 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BSi BSEN12560-4:2001 National foreword This British Standard is the official English language version of EN 12560-4:2001.It supersedes BS 7076-4:1989 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PSE/2 Jointing material and pounds which has the responsibility to: aid enquirers to understand the text; present to the responsible European mittee any enquiries on the interpretation or proposals for change and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this mittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled“International Standards Correspondence Index'"or by using the“Find"facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract.Users of British Standards are responsible for their corr...

BRITISH STANDARD BS EN 12560-3:2001 Flanges and their joints Gaskets for Class-designated flanges- Part 3:Non-metallic PTFE envelope gaskets The European Standard EN 12560-3:2001 has the status of a British Standard ICS23.040.80 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BSi BSEN12560-3:2001 National foreword This British Standard is the official English language version of EN12560-3:2001. The UK participation in its preparation was entrusted to Technical Committee PSE/2 Jointing material and pounds which has the responsibility to: aid enquirers to understand the text; present to the responsible European mittee any enquiries on the interpretation or proposals for change and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this mittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled“International Standards Correspondence Index'"or by using the“Find"facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract.Users of British Standards are responsible for their correct application. Compliance with a British Standard does not ofitself conferimmunity from legal obligatio...

BRITISH STANDARD BS EN 12560-2:2001 Flanges and their joints Gaskets for Class-designated flanges- Part 2:Spiral wound gaskets for use with steel flanges The European Standard EN 12560-2:2001 has the status of a British Standard ICS23.040.80 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BSi BSEN12560-2:2001 National foreword This British Standard is the official English language version of EN12560-2:2001. The UK participation in its preparation was entrusted to Technical Committee PSE/2 Jointing material and pounds which has the responsibility to: aid enquirers to understand the text; present to the responsible European mittee any enquiries on the interpretation or proposals for change and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this mittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled“International Standards Correspondence Index'"or by using the“Find"facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract.Users of British Standards are responsible for their correct application. Compliance with a British Standard does not ofitself conferimmunity from le...

ICS13.100 E09 Q/SH 中国石油化工集团有限公司企业标准 Q/SH0734—2018 油田注汽锅炉安全检验与评定技术规范 Inspection and evaluation security technical specifications of thermal mobile steam injection pipeline 2018-12-11发布 2019-04-01实施 中国石油化工集团有限公司发布 Q/SH0734—2018 目 次 前言 1范围 2规范性引用文件 3定期检验分类及周期 3.1定期检验分类 3.2定期检验周期 4外部检验 4.1使用单位准备工作 4.2检验方法 4.3资料核查 4.4检验内容及要求 2 4.5检验结论 3 5内部检验 5.1使用单位准备工作 5.2检验方法 4 5.3资料查阅 4 5.4内部检验内容及要求 .4 5.5检验结论 5 6水压试验 .5 6.1基本要求 -5 6.2使用单位的准备工作 6 6.3试验前检验机构的工作6 6.4试验压力 -6 6.5试验步骤 6 6.6试验合格要求 6 6.7试验结论 6 7检验报告 7 附录A(资料性附录)锅炉内（外）部检验结论报告-8 附录B(资料性附录)锅炉水压试验报告 9 Q/SH0734—2018 前言 本标准按照GB/T1.1一2009给出的规则起草. 本标准由中国石油化工集团有限公司安全监管局提出. 本标准由中国石油化工集团有限公司科技部归口. 本标准起草单位：胜利油田分公司技术检测中心. 本标准主要起草人：韩庆、陈健飞、仇东泉、王安泉、应居格、刘伟强、鱼泳. 本标准为首次发布. ...

广东省水利水电设备安装工程 预算定额 广东省水利水电工程造价定额站 0 前言 《广东省水利水电工程设计概（估）算编制规定》（以下简称“《编规》”） 及其配套的系列定额《广东省水利水电建筑工程概算定额》、《广东省水利 水电建筑工程概算定额》、《广东省水利水电设备安装工程概算定额》、《广 东省水利水电建筑工程预算定额》、《广东省水利水电设备安装工程预算定 额》、《广东省水利水电工程施工机械台班费定额》（以下简称“《系列定额》”） 是为进一步规范广东省地方水利水电工程建设市场行为，合理确定和有效 控制水利水电工程基本建设投资，提高投资效益，根据水利部、住房和城 乡建设部、财政部、税务总局等相关部门的规定及广东省水利厅粤水基 〔2006)2号文发布的我省水利水电工程系列定额与相应编制规定编制而 成. 本《编规》和《系列定额》保持了我省水利水电设计概算标准体系的 延续性和完整性，并充分考虑了近年来国家有关政策法规的调整以及我省 水利水电工程设计和建设管理中的新情况，经广泛调研、征求各方意见和 建议，对有关内容进行了认真研究，在内容结构上进行了调整，体现了水 利水电工程设计概（估）算编制标准的适用性、时效性. 本《编规》和《系列定额》作为广东省地方水利水电工程投资计价的 规范性文件，适用于广东省内审批、核准的地方各类水利水电新建（重建） 工程、改扩建及除险加固工程等项目，以及水土保持生态建设工程. 本《编规》和《系列定额》由广东省水利厅负责管理，广东省水利水 电工程造价定额站负责具体解释.在使用过程当中，若发现《编规》和《系 1 列定额》存在的不足及问题，各单位应及时将意见向广东省水利水电工程 造价定额站反映. 主编单位：广东省水利水电工程造价定额站. 参编单位：广东省水利电力勘测设计研究院、中水珠江规划勘测设计 有限公司、北京峡光经济技术咨询有限责任公司、广东省科源工程监理咨 询公司. 《系列定额》主要起草人：幸新龙王文华陆抗珍刘思华陈胜良张 忠良顾铮谢学军张松风吴莉莉熊婉宁李尚革吴昕林晓纯周松张 光兴李能淼 《系列定额》主要审查人：边立明王朋基尚友明瞿升腾凌小雄林 庆裕郑悦华费凯黄家伟张朝春苏铎陶东海郭威卢立明王保增张 碧峰彭栋善姚成平刘玉文徐雄峰 2 ...