This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:G105-20 INTERNATIONAL Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests This standard is issued under the fixed designation G105:the number immediately following the designation indicates the year of original adoption or in the case of revision.the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope E122 Practice for Calculating Sample Size to Estimate With 1.1 This test method covers laboratory procedures for de- Specified Precision the Average for a Characteristic of a termining the resistance of metallic materials to scratching Lot or Process abrasion by means of the wet sand/rubber wheel test.It is the E177 Practice for Use of the Terms Precision and Bias in intent of this procedure to provide data th...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standartis.Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F961-20 INTERNATIONAL Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035) This standard is issued under the fixed designation F961;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope* E10 Test Method for Brinell Hardness of Metallic Materials 1.1 This specification covers the chemical mechanical and E18 Test Methods for Rockwell Hardness of Metallic Ma- metallurgical requirements for 35cobalt-35nickel- terials 20chromium-10molybdenum alloy (UNS R30035)in the form E29 Practice for Using Significant Digits in Test Data to of forgings used for th...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F838-20 INTERNATIONAL Standard Test Method for Determining Bacterial Retention of Membrane Filters Utilized for Liquid Filtration This standard is issued under the fixed designation F838:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope 2.Referenced Documents 1.1 This test method determines the bacterial retention 2.1 ASTM Standards:2 characteristics of membrane filters for liquid filtration using D1193 Specification for Reagent Water Brevundimonas diminuta as the challenge organism.This test method can be used to evaluate any membrane filter system 3.Terminology used for liquid sterilization. 3.1 Definition...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F749-20 INTERNATIONAL Standard Practice for Evaluating Material Extracts by Intracutaneous Injection in the Rabbit' This standard is issued under the fixed designation F749;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope or other extraction vehicles can be used as described in 1.1 This practice is an intracutaneous reactivity test used to Practice F619.The extract liquid is injected into rabbits and the assess the potential of the material under test to produce animals are observed at regular intervals for 72 h for erythema irritation following intradermal injections of extracts of the edema eschar format...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standardis.Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F620-20 INTERNATIONAL Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition This standard is issued under the fixed designation F620;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope* E18 Test Methods for Rockwell Hardness of Metallic Ma- 1.1 This specification covers the requirements for titanium terials alloy forgings for surgical implants in the alpha plus beta E29 Practice for Using Significant Digits in Test Data to condition when the material forged conforms to Specifications Determine Conformance with Specifications F136(UNSR56401).F1295(UNSR56700) ...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F562-22 INTERNATIONAL Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)1 This standard is issued under the fixed designation F562:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (8)indicates an editorial change since the last revision or reapproval. 1.Scope* Determine Conformance with Specifications 1.1 This specification covers requirements of wrought E112 Test Methods for Determining Average Grain Size 35cobalt-35nickel-20chromium-10molybdenum alloy (UNS E354 Test Methods for Chemical Analysis of High- R30035)in the form of bar and wire used for the manufacture Temperature Electrical Magnetic and Other Similar Iron of surgical implants.This alloy depends on binations of Nickel and Cobalt Alloys work strengthening and aging to attain a variety of bina- F981 Practice for Assessment of Compatibility of Biomate- tions of strength and ductility. rials for Surgical Implants with Respect to Effect ...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation:F521-22 INTERNATIONAL StandardTestMethodsfor Bond Integrity of Transparent Laminates1 This standard is ssued under the fixed designation F521; the number immediately following the designation indicates the year of origial adoption o,in the case of revision, the year o last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (e) indicates an editorial change since the last revision or reapproval. 1. Scope3. Terminology 1.1 These test methods cover determination of the bond3.1 Definitions: integrity of transparent laminates. The laminates are usually3.1.1 delamination, n-a visible separation between two made of two or more glass or hard plastic sheets held together layers of bonded material. by an elastomeric material. These test methods are intended to3.1.2 face plies, ntransparent glass or plastic outer mate- provide a means of determining the strength of the bond rials joined together with an interlayer. between the glass or plastic and the elastomeric interlayer3.1.3 interlayer ntransparent material used as the bonding under various mechanical or thermal loading conditions. agent between two or more hard, transparent materials. 1.2 The test methods appear as follows:3.2 Definitions of Terms Specific to This Standard: Test Method AFlatwise Bond Tensile Strength Test Methods Sections5-113.2.1 number of plies, na three-ply laminate is one having Test Method C-Creep Rupture Test Method B-Interlaminar Shear Strength12-1718-25five-ply laminate has three glass or plastic plies and two Test Method D-Thermal Exposure26-30interlayer plies. 1.3 This standard does not purport to address all of the safety conc...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F51/F51M-20 INTERNATIONAL Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments1 This standard is issued under the fixed designation F51/F51M;the number immediately following the designation indicates the year of original adoption or.in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope 2.Referenced Documents 1.1 This test method covers the determination of detachable 2.1 ASTM Standards:2 particulate contaminant 5 um or larger in and on the fabric of E1216 Practice for Sampling for Particulate Contamination clean room garments. by Tape Lift F25/F25M Test Method for Sizing and Counting Airborne 1.2 This test method does not apply to nonporous fabrics Particul...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F3550-22 INTERNATIONAL Standard Guide for Classifying Safety-Related Events1 This standard is issued under the fixed designation F3550:the number immediately following the designation indicates the year of original adoption or in the case of revision.the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (s)indicates an editorial change since the last revision or reapproval. 1.Scope 3.3 Abnormality-An event or measurement that is not in 1.1 This standard provides guidance on how to classify the normal statistical population for a system performance safety-related events in space flight.In addition this guide parameter;a new extreme for a system performance parameter; defines the terms needed for classification such as their a load or system performance measurement that is outside the severity and impact. ...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F3545-22 INTERNATIONAL Standard Test Method for Static Loading of Treestands Climbing Sticks and Tripod or Tower Stands This standard is issued under the fixed designation F3545:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (8)indicates an editorial change since the last revision or reapproval. 1.Scope 3.2 corner stabiliry n-the ability of a treestand to resist 1.1 This test method covers procedures for static loading of eccentricity twisting or sudden movement when load is various ponents of treestands climbing sticks and tripod/applied separately to each of the four corners of a foot tower stands that are used for hunting photographing or platform. general observation.This test...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F3544-21 INTERNATIONAL Standard Test Method for Hunting Saddle Static Load Capacity This standard is issued under the fixed designation F3544:the number immediately following the designation indicates the year of original adoption or in the case of revision.the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (s)indicates an editorial change since the last revision or reapproval. 1.Scope 5.Significance and Use 1.1 This test method covers the determination of the static 5.1 This test method is intended for quality assurance and load capacity of hunting saddles and bridge in terms of a factor production control purposes. of safety relative to the manufacturer's rated capacity. 1.2 The values shared are in inch-pound units and are to be 6.Apparatus regarded as the standard.No other units of measurement are...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F3543-22 INTERNATIONAL Standard Terminology Relating to Hunting Saddles This standard is issued under the fixed designation F3543:the number immediately following the designation indicates the year of original adoption or in the case of revision.the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (s)indicates an editorial change since the last revision or reapproval. 1.Scope center tether connection to allow for horizontal movement of the 1.1 This terminology covers terms related to hunting hunting saddle and user.The bridge may or may not be adjustable with a device. saddles. bridge loops n-when present that portion of the saddle 1.2 This terminology is appropriate for use by hunting where the bridge attaches to the saddle. saddle development professionals owners and institutions DIscUssIoN-On some s...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F3526-21 INTERNATIONAL Standard Guide for Aircraft Instrument Systems Technician Certification1 This standard is issued under the fixed designation F3526:the number immediately following the designation indicates the year of original adoption or in the case of revision.the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (s)indicates an editorial change since the last revision or reapproval. 1.Scope 4.Significance and Use 1.1 The purpose of this guide is to address the basic 4.1 The guide is intended to be used to assess petencies fundamental subject knowledge activities and functions for of qualified individuals who wish to bee certified as an AIS avionics professionals to be titled Aircraft Instrument Systems Technician through a certification program. (AIS)Technician. 4.2 The guide is intended ...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F3497-21 INTERNATIONAL Standard Test Method for Evaluating the Oxidative Resistance of Polypropylene (PP) Piping Systems to Hot Chlorinated Watert This standard is issued under the fixed designation F3497:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (8)indicates an editorial change since the last revision or reapproval. 1.Scope environmental practices and determine the applicability of 1.1 This test method describes the general requirements for regulatory limitations prior to use. evaluating the long-term chlorinated water oxidative resis- 1.5 This international standard was developed in accor- tance of polypropylene (PP)piping produced in accordance dance with internationally reco...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F3479-20 INTERNATIONAL Standard Specification for Failure Tolerance for Occupant Safety of Suborbital Vehicles1 This standard is issued under the fixed designation F3479:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope 2.2 RTCA Standards: 1.1 This specification provides system safety engineering RTCA DO-178 Software Considerations in Airborne Sys- and failure tolerance requirements applicable to occupant tems and Equipment Certification RTCA DO-278 Software Integrity Assurance Considerations safety for suborbital vehicles. for Communication Navigation Surveillance and Air 1.2 This specification is not inten...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F3455/F3455M-22 INTERNATIONAL Standard Practice for Establishing the Minimum-and Maximum-Width Configurations for Crash Testing of Exceptionally Long Variable-Width Vehicle Barriers This standard is issued under the fixed designation F3455/F3455M:the number immediately following the designation indicates the year of original adoption or in the case of revision.the year of last revision.A number in parentheses indicates the year of last reapproval. A superscript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope 1.8 The values stated in either SI units or inch-pound units 1.1 This practice provides a procedure for applying Test are to be regarded separately as standard.The values stated in Method F2656/F2656M test criteria to an exceptionally long each system are not necessarily exact equivalents;therefore to (that is 300 f...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standardis.Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F3415-20 INTERNATIONAL Standard Test Method for Triaxial Shear Strength and Cohesion of Equine Sports Surfaces1 This standard is issued under the fixed designation F3415;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope refrigerated water bath with a triaxial cell cap fitted with a 1.1 This adapted test method covers the determination of copper coil.Failure criteria is assumed under similar condi- strength and stress-strain relationships of a cylindrical speci- tions for the dirt surfaces and results are presented as the men of a pacted drained cohesive natural or synthetic soil failure stress at 15 psi ...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standartis.Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F3390-20 INTERNATIONAL Standard Specification for 3 through 24 in.Lined Flexible Corrugated Polyethylene Pipe for Land Drainage Applications This standard is issued under the fixed designation F3390 the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope Development of International Standards Guides and Re- 1.1 This specification covers requirements and test methods mendations issued by the World Trade Organization Technical for flexible annular corrugated profile wall polyethylene pipe Barriers to Trade (TBT)Committee. with an interior liner.It covers nominal sizes 3 in.(75 mm) 4 2.Referenced Documents in.(10...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standartis.Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F3379-20 INTERNATIONAL Standard Guide for Training for Public Safety Remote Pilot of Unmanned Aircraft Systems (UAS)Endorsement This standard is issued under the fixed designation F3379 the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope 2.Referenced Documents 1.1 This guide covers the minimum training requirements 2.1 ASTM Standards:2 for public safety remote pilots (PS-RPs)as it relates to their F2908 Specification for Unmanned Aircraft Flight Manual general field and search specific knowledge and skills. (UFM)for an Unmanned Aircraft System (UAS) 1.2 This guide does not provide the minimum training F2910 S...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:F3359/F3359M-21 INTERNATIONAL Standard Test Method for Determining Bending Yield Moment of Staples1 This standard is issued under the fixed designation F3359/F3359M:the number immediately following the designation indicates the year of original adoption or.in the case of revision.the year of last revision.A number in parentheses indicates the year of last reapproval. A superscript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope F1667/F1667M Specification for Driven Fasteners:Nails 1.1 This test method covers procedures for determining the Spikes and Staples bending yield moment of staples when subjected to static loading.Although intended for flat crown staples identified in 3.Terminology Specification F1667/F1667M this procedure is also applicable 3.1 Definitions of Terms Specific to This Standard: for staples with ro...