PUBLISHED DOCUMENT PD CR 13445-7:2002 Unfired pressure vessels- Part 7:Guidance on the use of the conformity procedures ICS23.020.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS PDCR13445-7:2002 National foreword This Published Document is the official English language version of CR13445-7:2002. The UK participation in its preparation was entrusted by Technical Committee PVE/1,Pressure vessels,to Submittee PVE/1/17,Inspection,testing and acceptance criteria,which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European mittee any enquiries on the interpretation,or proposals for change,and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this submittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled"International Standards Correspondence Index",or by using the“Search"facility of the BSI Electronic Catalo...

PUBLISHED DOCUMENT PD CEN/TR 13445-9:2007 Unfired pressure vessels- Part 9:Conformance of the EN 13445 series to Iso 16528 ICS23.020.80 BSi NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW British Standards PD CEN/TR13445-9:2007 National foreword This Published Document is the UK implementation of CEN/TR 13445-9:2007. The UK participation in its preparation was entrusted to Technical Committee PVE/1,Pressure vessels. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. This Published Document was Amendments issued since publication published under the authority of the Standards Policy and Strategy Committee Amd.No. Date Comments on 31 August 2007 BSI2007 ISBN9780580580352 TECHNICAL REPORT CEN/TR13445-9 RAPPORT TECHNIQUE TECHNISCHER BERICHT April 2007 ICS23.020.30 English Version Unfired pressure vessels Part 9:Conformance of the EN 13445 series to ISO 16528 Recipients sous pression non soumis a la flamme-Partie Unbefeuerte Druckbehalter-Teil 9:Gegenuberstellung der 9:Conformite ...

ISO ANSI NACE THE WORLDWIDE CORROSION AUTHORITY Item No.21307 International Standard ANSI/NACE MR0175/ISO 15156-1:2015 Petroleum,petrochemical,and natural gas industries Materials for use in H2S-containing environments in oil and gas production- Part 1: General principles for selection of cracking-resistant materials An American National Standard Approved November 23,2015 Reference number ANSI/NACE MR0175/ISO 15156:2015 ©ANSI/NACE/IS02015 ,,,,,, ,,, Licensee-Suncor Energy inc-Sites 1.3,7/9992021001.User Abdolmalek.Aire No reproduction or networking permitted wthout loense from IHS 4010F000.01512131155 ! COPYRIGHT PROTECTED DOCUMENT These materials are subject to copyright claims of ISO and NACE.No part of this publication may be reproduced in any form, including an electronic retrieval system,without the prior written permission of NACE.All requests pertaining to the ANSI/NACE MR0175/ISO 15156 standard should be submitted to NACE.All rights reserved. International Organization for Standardization (ISO) ISO Central Secretariat BIBCII Chemin de Blandonnet 8 CP401 1214 Vernier,Geneva Switzerland Tel.+41227490111 Fax+41227490947 Web:.iso.ch NACE International 15835 Park Ten Place Ho...

MENG203 EXPERIMENTAL METHODS FOR ENGINEERS ENGINEERING MEASUREMENTS BY Assoc.Prof.Dr.Hasan Hacisevki 1 BOQU ANS Standards organizations 回 TSE:Turkish Standards Organisation 回 EN Europian Norms 回 ISO International Organization for Standardization 回 DIN:Deutsches Institut fur Normung 回 BS British Standards 回 SASO:Saudi Arabian Standards organization 回 JIS Japanese Industrial Standards 回 ANSI American National Standards Institute 回 ASTM:American Society for Testing and Materials 可 Others-ASME,NFPA,ASHRAE,etc. 2 - BOQU EXAMPLES OF BRITISH STANDARDS 回 BS 79 Report on Dimensions of Special Trackwork for Tramways 回 BS 80 Magnetos for Automobile Purposes 回 BS 81 Specification for Instrument Transformers BS 82 Specification for Starters for Electric Motors 回 BS 83 Standard of Reference for Dope and Protective Covering for Aircraft BS 84 Report on Screw Threads (British Standard Fine), and their Tolerances (Superseding parts of Reports Nos.20 and 33) 回 BS 86 Report on Dimensions of Magnetos for Aircraft Purposes BS 87 Report on Dimensions for Airscrew Hubs 3 ...

BRITISH STANDARD BS EN 1998-1:2004 Eurocode 8:Design of structures for earthquake resistance Part 1:General rules,seismic actions and rules for buildings The European Standard EN 1998-1:2004 has the status of a British Standard ICS91.120.25 BSi NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW British Standards BSEN1998-1:2004 National foreword This British Standard is the official English language version of EN 1998-1:2004.It supersedes DD ENV 1998-1-1:1996,DD ENV 1998-1-2:1996 and DD ENV 1998-1-3:1996 which are withdrawn. The structural Eurocodes are divided into packages by grouping Eurocodes for each of the main materials,concrete,steel,posite concrete and steel,timber,masonry and aluminium.This is to enable a mon date of withdrawal (DOW)for all the relevant parts that are needed for a particular design.The conflicting national standards will be withdrawn at the end of the coexistence period,after all the EN Eurocodes of a package are available. Following publication of the EN,there is a period of 2 years allowed for the national calibration period during which the national annex is issued,followed by a three year coexistence period.During the coexist...

BRITISH STANDARD BS EN 1993-5:2007 Eurocode 3- Design of steel structures Part 5:Piling The European Standard EN 1993-5:2007 has the status of a British Standard ICS91.010.30:91.080.10 BSi NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW British Standards BSEN1993-5:2007 National foreword This British Standard was published by BSI.It is the UK implementation of EN1993-5:2007. BS EN 1993-5 will partially supersede BS 449-2:1969 and BS 5950-1:2000, which will be withdrawn by March 2010. The structural Eurocodes are divided into packages by grouping Eurocodes for each of the main materials:concrete,steel,posite concrete and steel, timber,masonry and aluminium;this is to enable a mon date of withdrawal (DOW)for all the relevant parts that are needed for a particular design.The conflicting national standards will be withdrawn at the end of the coexistence period,after all the EN Eurocodes of a package are available. Following publication of the EN,there is a period allowed for national calibration during which the National Annex is issued,followed by a coexistence period of a maximum 3 years.During the coexistence period Member States are encouraged to adapt ...

UNM Union de Normalisation de la Mecanigue EN 13445 "Unfired pressure vessels" Background to the rules in Part 3 Design Editors: Guy BAYLAC Consultant and Technical Advisor to EPERC 114 avenue Felix Faure F-75015 PARIS guy.baylac@wanadoo.fr Danielle KOPLEWICZ Technical Director Union de Normalisation de la Mecanique F-92038 PARIS LA DEFENSE d.koplewicz@unm.fr Issue 2-20 August 2004 AF AQ 1509001 VEIS ON 2900 ☒92038 Paris La Defense cedex 45,rue Louis Blanc 92400 Courbevoie France Site internet .unm.fr Tel.:+33147176767 Fax:+33147176799 Introduction The European standard EN 13445 "Unfired pressure vessels"provides a precedent in that after 10 years of discussion between experts,a European consensus was achieved in the field of pressure equipment.Part 3 which was prepared by a group of leading European experts under the guidance of Dr.Fernando LIDONNICI,Sant'Ambrogio,(Milano,Italy), represents a major advance in European technical convergence.The adoption of the first issue of EN 13445 in May 2002 was the first step of a continuous process for development improvement. This new standard benefits from the contribution of all the European expertise;as such,it includes innovative capa...

TTVNORD FuBzeile 02.12.2015 2 EN 13445 Unfired pressure vessels Part 1:General TUVNORD This European Standard concerning "Unfired pressure vessels"prises the following Parts: Part 1:General Part 2:Materials Part 3:Design Part 4:Fabrication Part 5:Inspection and testing Part 6:Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron CR 13445-7,Unfired pressure vessels-Part 7:Guidance on the use of conformity assessment procedures -Part 8:Additional requirements for pressure vessels of aluminium and aluminium alloys -CEN/TR 13445-9,Unfired pressure vessels-Part 9:Conformance of EN 13445 series to ISO 16528 Although these Parts may be obtained separately,it should be recognised that the Parts are inter-dependant.As such the manufacture of unfired pressure vessels requires the application of all the relevant Parts in order for the requirements of the Standard to be satisfactorily fulfilled. FuBzeile 02.12.2015 3 ...

Certified FISCHER X-RAY Calibration Standards and Accessories DIN ISO/IEC 17025 accredited December 2017/3 工 +ischer一 Coating Thickness Material Analysis Microhardness Q Material Testing X-RAY Calibration Standards Quality Assurance with Energy-dispersive X-Ray Fluo- Why DAkkS Accreditation? rescence Analysis (EDXRF Analysis) Quality assurance and optimum processing procedures play an ever greater role in production.From this stems DAkkS the necessity to perform reliable measurements,which Deutsche Akkreditierungsstelle also ply with the demanding requirements of an D-K-15076-01-00 ISO certified quality management system. Energy-dispersive X-ray fluorescence analysis (EDXRF FISCHER Calibration Lab plies with analysis)is a particularly universal,fast and non- destructive measuring method.By using suitable refer- DIN EN ISO/IEC 17025 ence materials,it enables coating thicknesses and material position for a large number of applica- Calibration standards from FISCHER with DAkkS tions to be determined with a high level of precision accreditation give you the following benefits: and in a traceable way.The wide range of industrial applications and the short cycle of product innov...

BSEN62305-3:2011 BSI Standards Publication Protection against lightning Part 3:Physical damage to structures and life hazard NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raisina standards BSi BSEN62305-3:2011 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 62305-3:2011. It was derived from IEC 62305-3:2010.It supersedes BS EN 62305-3:2006,which will be withdrawn on 27 May 2012. Parts 1,3 and 4 of EN 62305 contain references to EN 62305-2:2011. This reference is incorrect since Part 2 is not due to be published until 2012 to allow for the finalization of the CENELEC mon modifications. Until EN 62305-2:2012 is published and adopted as BS EN 62305-2:2012,the existing BS EN 62305-2:2006 can continue to be used with the newly published BS EN 62305-1:2011,BS EN 62305-3:2011 and BS EN62305-4:2011. The CENELEC mon modifications have been implemented at the appropriate places in the text and are indicated by tags (e.g.C)(C). The UK participation in its preparation was entrusted to Technical Committee GEL/81,Protection against lightning. A list of organizations represented on this mittee can be obtained on request...

BRITISH STANDARD BS ISO/IEC 27002:2005 BS7799-1:2005 Incorporating corrigendum no.1 Information technology- Security techniques ,一 Code of practice for information security management ICS35.040 BSi NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW British Standards BS ISO/IEC 27002:2005 National foreword This British Standard is the UK implementation of ISO/IEC 27002:2005, incorporating corrigendum July 2007.It supersedes BS ISO/IEC 17799:2000 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee IST/33,Information technology-Security Techniques. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was Amendments issued since publication published under the authority of the Standards Policy and Strategy Committee Amd.No. Date Comments on 16 June 2005 17310 31July2007 Identifier of standard renumbered from Corrigendum No.1 (BS)ISO/IEC 1...

BS EN ISO 5459:2011 BSI Standards Publication Geometrical product specifications (GPS)- Geometrical tolerancing Datums and datum systems (1S05459:2011) NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raising standards worldwide" BSi BS EN ISO 5459:2011 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 5459:2011. It supersedes BS ISO 5459:1981 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee TDW/4,Technical Product Realization. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. BS12011 ISBN9780580534812 1C501.100.20;17.040.10 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2011. Amendments issued since publication Date Text affected EUROPEAN STANDARD EN ISO 5459 NORME EUROPEENNE EUROPAISCHE NORM August 2011 1CS01.100.20:17.040.10 English Ver...

BS EN ISO15156-3:2015 BSI Standards Publication Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3:Cracking-resistant CRAs (corrosion- resistant alloys)and other alloys bsi. ..making excellence a habit. Stardards Irsitution Lieense ongqing Inastute ol qualiy and Standardization 5990390 Piowded by IHS under lcense with BSI-Cooy Nof0rR68le.201511307148:47 No reproducion er networkirg permited wihout icense frem IHS BS EN ISO15156-3:2015 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 15156-3:2015.It supersedes BS EN ISO 15156-3:2009 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PSE/17,Materials and equipment for petroleum, petrochemical and natural gas industries. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. ©The British Standards Institution2015, Published by BSI Standards Limited 2015 ISBN9780580869587 1CS75.180.10;77.060 Compliance...

BRITISH STANDARD BS EN ISO 14644-5:2004 Cleanrooms and associated controlled environments- Part 5:Operations The European Standard EN ISO 14644-5:2004 has the status of a British Standard ICS13.040.35 BSi NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW British Standards BS EN IS014644-5:2004 National foreword This British Standard is the official English language version of EN ISO 14644-5:2004.It is identical with ISO 14644-5:2004. It supersedes BS 5295-3:1989 which is withdrawn.It,together with BS EN ISO 14644-4:2001,supersedes DD ENV 1631:1996 which is now withdrawn. The UK participation in its preparation was entrusted to Technical Committee LBI/30,Cleanroom technology,which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European mittee any enquiries on the interpretation,or proposals for change,and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this mittee can be obtained on request to its secretary. Cross-referenees The British Standards which implement international or European pu...

BRITISH STANDARD BS EN 60601-1:2006 Medical electrical equipment- Part 1:General requirements for basic safety and essential performance The European Standard EN 60601-1:2006 has the status of a British Standard ICS11.040 BSi .china-gaug NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW British Standards BSEN60601-1:2006 National foreword This British Standard was published by BSI.It is the UK implementation of EN 60601-1:2006.It is identical with IEC 60601-1:2005.It supersedes BS EN 60601-1:1990 and BS EN 60601-1-4:1997 which are declared obsolescent and will be withdrawn on publication of the revised BS EN 60601-2 series.It also supersedes BS EN 60601-1-1:2001 which is declared obsolescent and will be withdrawn on 12 September 2009. For medical electrical equipment not covered by the BS EN 60601-2 series, BS EN 60601-1:1990 and BS EN 60601-1-4:1997 can continue to be applied until 12 September 2009,although BS EN 60601-1:2006 should be applied as soon as possible. For medical electrical systems,BS EN 60601-1-1:2001 and BS EN 60601-1-4:1997 can continue to be applied until 12 September 2009, although BS EN 60601-1:2006 should be applied as soon as po...

BRITISH STANDARD BS EN 206-1:2000 Incorporating Corrigenda Nos.I and 2 and Amendments Nos.1,2 and 3 Concrete- Part 1:Specification,performance, production and conformity The European Standard EN 206-1:2000,with the incorporation of amendments A1:2004 and A2:2005,has the status of a British Standard ICS91.100.30 BSi NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW British Standards BSEN206-1:2000 National foreword This British Standard is the official English language version of EN 206-1:2000,including amendments A1:2004 and A2:2005.It supersedes DD ENV 206:1992 which is withdrawn. The start and finish of text introduced or altered by CEN amendment is indicated in the text by tags A)Al.Tags indicating changes to CEN text carry the number of the CEN amendment.For example,text altered by CEN amendment A1 is indicated by AA. It is intended that this British Standard be used in conjunction with the plementary standards BS 8500-1 and BS 8500-2 which give national provisions where they are permitted in EN 206-1:2000 and these standards supersede BS5328-1:1997,BS5328-2:1997,BS5328-3:1990and BS 5328-4:1990 which will be withdrawn on 1 December 2003. The UK participa...

BSEN13445-8:2009 BSI British Standards Unfired pressure vessels- Part 8:Additional requirements for pressure vessels of aluminium and aluminium alloys NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raising standards worldwide" BSi British Standards BSEN13445-8:2009 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 13445-8:2009.It supersedes BS EN 13445-8:2006 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PVE/1,Pressure vessels. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. BSI2009 ISBN9780580656521 ICS23.020.30 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2009. Amendments issued since publication Date Text affected EUROPEAN STANDARD EN13445-8 NORME EUROPEENNE EUROPAISCHE NORM July 2009 1CS23.020.30 Supersedes EN 13445-8:2006 Engl...

BSEN13445-6:2009 BSI British Standards Unfired pressure vessels- Part 6:Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raising standards worldwide" BSi British Standards BSEN13445-6:2009 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 13445-6:2009. It supersedes BS EN 13445-6:2002+A2:2006 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PVE/1,Pressure vessels. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. ©BSI2009 ISBN9780580655739 1CS23.020.30 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2009. Amendments issued since publication Date Text affected EUROPEAN STANDARD EN13445-6 NORME EUROPEENNE EUROPAISCH...

BSEN13445-3:2009 BSI British Standards Unfired pressure vessels- Part 3:Design NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raising standards worldwide" BSi British Standards BSEN13445-3:2009 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 13445-3:2009. It supersedes BS EN 13445-3:2002+A11:2006 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PVE/1,Pressure vessels. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. ©BSI2009 ISBN9780580655623 1CS23.020.30 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2009. Amendments issued since publication Date Text affected EUROPEAN STANDARD EN13445-3 NORME EUROPEENNE EUROPAISCHE NORM July 2009 1CS23.020.30 Supersedes EN 13445-3:2002 English Version Unfired pressure vessels Part 3:Design Recipients...

W ERRATA CORRIGE N°2 alla versione in lingua inglese DEL 5 aprile 2012 NORMA UNI EN 13445-3(dicembre 2009) TITOLO Recipienti a pressione non esposti a fiamma Parte 3: Progettazione Punto della Pagina Oggetto della Modifica norma modifica Relazioni Sostituire "e tiene conto delle correzioni introdotte il 28 luglio 2010" intemazionali con"e tiene conto delle correzioni introdotte il 28 luglio 2010 e il 27 luglio 2011" Premessa Sostituire "con correzioni del 28 luglio 2010"con"con correzioni del nazionale 28 luglio 2010 e del 27 luglio 2011" Dopo pagina ll Inserire il tile allegato Documenti allegati:Correction Notice alla EN 13445-3 del 27-07-2011 ©UNl-Ente Nazionale Italiano di Unificazione Pag.1 di 1 cen EUROPEAN COMMITTEE FOR STANDARDIZATION Correction Notice COMITE EUROPEEN DE NORMALISATION EUROPAISCHES KOMITEE FUR NORMUNG EN13445:2009 Title:Unfired pressure vessels Brussels,2011-07-27 With reference to the above,please include the following minor editorial correction(s)in the document ☒for the following procedure: Enguiry Parallel Enquiry(ISO/CEN Lead) For: Action Info Formal Vote Parallel Formal Vote(□ISO/CEN Lead) CEN Members 区 UAP CEN Affiliates Comments before voting meeting...