BS EN ISO17892-9:2018 BSI Standards Publication Geotechnical investigation and testing Laboratory testing of soil Part 9:Consolidated triaxial pression tests on water saturated soils bsi. BS EN ISO17892-9:2018 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 17892-9:2018. It is identical to ISO 17892-9:2018.It supersedes BS 1377-8:1990 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee B/526/3 Site investigation and ground testing. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. ©The British Standards Institution2018 Published by BSI Standards Limited 2018 ISBN9780580940873 ICS93.020 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2018. Amendments/corrigenda issued since publication Date Text affected EUROPEAN STANDARD ENISO17892-9 NORME EUROPEENNE EUROPAISCHE NORM April 2018 ICS13.080.20:93.020 Supersedes CEN ISO/TS 17892-9:2004 English Version Geotechnical investigation and testing-Laboratory testing of soil Part 9:Consolidated triaxial pression tests on water saturated soils (ISO 17892-9:2018) Reconnaissance et essais geotechniques-Essais Geotechnische Erkundung und Untersuchung de laboratoire sur les sols-Partie 9:Essais en Laborversuche an Bodenproben-Teil 9: pression a l'appareil triaxial consolides Konsolidierte triaxiale Kompressionsversuche an sur sols satures (ISO 17892-9:2018) wassergesattigten Boden (ISO 17892-9:2018) This European Standard was approved by CEN on 2 February 2018. CEN members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the statu...

BSEN1SO17892-4:2016 BSI Standards Publication Geotechnical investigation and testing -Laboratory testing of soil Part 4:Determination of particle size distribution (ISO 17892-4:2016) bsi. Brissh Standards Institution Licensee-JILIN INSTITUTE OF STANDARDIZATION 5993190 Provided by IHS under icense with BSI-Uncontrolled Copy Not for Re5ae.2017420004:24 No reproduction or networking permtted wihout loonse from IHS BS EN ISO17892-4:2016 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 17892-4:2016.It partially supersedes BS 1377-2:1990 specifically clause 9. The UK participation in its preparation was entrusted to Technical Committee B/526/3 Site investigation and ground testing. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016 ISBN9780580853814 ICS13.080.20;93.020 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2016. Amendments/corrigenda issued since publication Date Text affected Brissh Standards Institution Licensee-JILIN INSTITUTE OF STANDARDIZATION 5993190 Provided by IHS under icense with BSI-Uncontrolled Copy No.for Re5ae 20174/2006:04:24 No reproduction or networking permitted wihout loonse from IHS EUROPEAN STANDARD ENISO17892-4 NORME EUROPEENNE EUROPAISCHE NORM November 2016 ICS13.080.20:93.020 Supersedes CEN ISO/TS 17892-4:2004 English Version Geotechnical investigation and testing Laboratory testing of soil-Part 4:Determination of particle size distribution (ISO17892-4:2016) Reconnaissance et essais geotechniques-Essais de Geotechnische Erkundung und Untersuchung- laboratoire sur les sols-Partie 4:Det...

BS EN ISO17892-12:2018A1:2021 BSI Standards Publication Geotechnical investigation and testing- Laboratory testing of soil Part 12:Determination of liquid and plastic limits bsi. BS EN ISO17892-12:2018A1:2021 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 17892-12:2018A1:2021.It is identical to ISO 17892-12:2018 incorporating amendment 1:2021.It supersedes BS EN ISO 17892-12:2018 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee B/526/3 Ground investigation and ground testing. A list of organizations represented on this mittee can be obtained on request to its mittee manager. Contractual and legal considerations This publication has been prepared in good faith however no representation warranty assurance or undertaking (express or implied)is or will be made and no responsibility or liability is or will be accepted by BSI in relation to the adequacy accuracy pleteness or reasonableness of this publication.All and any such responsibility and liability is expressly disclaimed to the full extent permitted by the law. This publication is provided as is and is to be used at the recipient's own risk. The recipient is advised to consider seeking professional guidance with respect to its use of this publication. This publication is not intended to constitute a contract.Users are responsible for its correct application. The British Standards Institution2021 Published by BSI Standards Limited 2021 ISBN9780539136142 ICS13.080.20;93.020 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2018. Amendments/corrigenda issued since publication Date Text affected 30 September 2021 Implementation of ISO amendment 1:2021 with CEN endorsement A1:2021:Figure A.2 replaced EUROPEAN STANDARD ENISO17892-12:2018 NORME EUROPEENNE A1 EUROPAISCHE NORM...

BS EN ISO17892-11:2019 BSI Standards Publication Geotechnical investigation and testing- Laboratory testing of soil Part 11:Permeability tests bsi. Copyright British Standards insttution BS EN ISO17892-11:2019 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 17892-11:2019. It partially supersedes BS 1377-5:1990 specifically Clause 5 and BS 1377-6:1990 specifically Clause 5. The UK participation in its preparation was entrusted to Technical Committee B/526/3 Site investigation and ground testing. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. ©The British Standards Institution2019 Published by BSI Standards Limited 2019 ISBN9780580940828 ICS13.080.20;93.020 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2019. Amendments/corrigenda issued since publication Date Text affected Copyright British Standards Insttution EUROPEAN STANDARD ENISO17892-11 NORME EUROPEENNE EUROPAISCHE NORM February 2019 ICS13.080.20:93.020 Supersedes CEN ISO/TS 17892-11:2004 English Version Geotechnical investigation and testing -Laboratory testing of soil Part 11:Permeability tests (ISO 17892-11:2019) Reconnaissance et essais geotechniques- Geotechnische Erkundung und Essais de laboratoire sur les sols-Partie 11: Untersuchung-Laborversuche an Essais de permeabilite (ISO 17892-11:2019) Bodenproben-Teil 11:Bestimmung der Wasserdurchlassigkeit(ISO 17892-11:2019) This European Standard was approved by CEN on 8 February 2019. CEN members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-t...

BSEN1SO17639:2013 BSI Standards Publication Destructive tests on welds in metallic materials- Macroscopic and microscopic examination of welds bsi. ..making excellence a habit. Coovriaht British Standards Provided by IHS under loense with BSI-Unoontroled Copy No rmproduction or networking permitted wthout ioonse from IHS Not for Rosale BS EN ISO 17639:2013 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 17639:2013.It is identical to ISO 17639:2003.It supersedes BS EN 1321:1997 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee WEE/46 Non-destructive testing. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. ©The British Standards Institution2013.Published by BSI Standards Limited 2013 ISBN9780580811401 ICS25.160.40 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2013. Amendments issued since publication Date Text affected Coovriaht British Standards Prowided by IHS under icense with BSI-Uncontrolled Copy No reproduction or networking permitted wthout ioonse from IHS Not for Rosale EUROPEAN STANDARD EN ISO 17639 NORME EUROPEENNE EUROPAISCHE NORM August 2013 ICS25.160.40 Supersedes EN 1321:1996 English Version Destructive tests on welds in metallic materials Macroscopic and microscopic examination of welds (ISO 17639:2003) Essais destructifs des soudures sur materiaux metalliques- Zerstorende Prufung von SchweilBverbindungen an Examens macroscopique et microscopique des metallischen Werkstoffen Makroskopische und assemblages soudes (ISO 17639:2003) mikroskopische Untersuchungen von SchweiBnahten(ISO 17639:2003) This European Standard was approved...

BS EN ISO15614-8:2016 BSI Standards Publication Specification and qualification of welding procedures for metallic materials-Welding procedure test Part 8:Welding of tubes to tube-plate joints (ISO15614-8:2016) bsi. ..making excellence a habit. Brissh Standards Institution BS EN ISO15614-8:2016 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 15614-8:2016.It supersedes BS EN ISO 15614-8:2002 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee WEE/36 Qualification of welding personnel and welding procedures. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. The British Standards Institution2016.Published by BSI Standards Limited 2016 ISBN9780580856983 1C525.160.10 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2016. Amendments issued since publication Date Text affected Brissh Standards Institution EUROPEAN STANDARD ENISO15614-8 NORME EUROPEENNE EUROPAISCHE NORM April 2016 ICS25.160.10 Supersedes EN ISO 15614-8:2002 English Version Specification and qualification of welding procedures for metallic materials-Welding procedure test-Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2016) Descriptif et qualification d'un mode operatoire de Anforderung und Qualifizierung von SchweifBverfahren soudage sur les materiaux metalliques-Epreuve de fur metallische Werkstoffe- qualification d'un mode operatoire de soudage-Partie SchweifSverfahrensprufung-Teil 8:EinschweifSen von 8:Soudage de tubes sur plaques tubulaires (ISO 15614- Rohren in Rohrboden (ISO 15614-8:2016) 8:2016 This European Standard was approved by CEN on 2 January 2016. CEN members are ...

BRITISH STANDARD BS EN ISO 15614-2:2005 Specification and qualification of welding procedures for metallic materials-Welding procedure test Part 2:Arc welding of aluminium and its alloys The European Standard EN ISO 15614-2:2005 has the status of a British Standard ICS25.160.10 BSi NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Copyright Brtish Standards ins British Standards BS EN ISO15614-2:2005 National foreword This British Standard is the official English language version of EN ISO 15614-2:2005.It is identical with ISO 15614-2:2004.It supersedes BS EN 288-4:1992 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee WEE/36 Approval testing of welding procedures and welders which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European mittee any enquiries on the interpretation or proposals for change and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this mittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled "International Standards Correspondence Index" or by using the“Search'"facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. Compliance with a British Standard does not ofitself confer immunity from legal obligations. This British Standard was Summary of pages published under the authority of the Standards Policy and This document prises a front cover an inside front cover the EN ISO title Strategy Committee on page pages 2 to 35 and a back cover. 26 April 2005 The BSI copyright notic...

BS EN ISO15614-1:2017A1:2019 Incorporating corrigenda July 2017 and May 2018 BSI Standards Publication Specification and qualification of welding procedures for metallic materials-Welding procedure test Part 1:Arc and gas welding of steels and arc welding of nickel and nickel alloys bsi. Copyright British Standards nsthution Licensee=Shenzhen of Standands and Technology 9072181 Provided by IHS Markst under icense with BSI-Uncontroled Copy Not5 or Resale.20203/111406:58 No reproduction or networking permitted wthout loense from IHS BS EN ISO15614-1:2017A1:2019 BRITISH STANDARD National foreword This British Standard is the UK implementation of ENISO15614-1:2017A1:2019.It is identical to ISO15614-1:2017 incorporating amendment 1:2019.It supersedes BS EN ISO 15614-1:2017 which is withdrawn. BSI as a member of CEN is obliged to publish EN 15614-1:2017A1:2019 as a British Standard.However attention is drawn to the fact that during the development of this standard the UK mittee voted against its approval. The UK mittee is concerned that the format of this standard may cause a problem when working to either of the two welding procedure test levels.Level 1 is based on the requirements of ASME BPVC Section IX Welding Brazing and Fusing Qualifications and Level 2 for which the extent of testing is greater is based on the previous version of this standard;BS EN ISO 15614-1:2004A2:2012.It is important to note that a procedure test carried out to Level 2 automatically qualifies for Level 1 requirements but not vice-versa.Furthermore when no level is specified in a contract or application standard all the requirements of Level 2 should be applied. Users should be aware that as the requirements of the two levels are often specified in the same clause vigilance is required to identify the testing requirements and the range of qualification for the particular welding procedure test level. The start and finish of text introduced or altered by amendment is indicated in th...

BSEN1SO14732:2013 BSI Standards Publication Welding personnel- Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials bsi. ...making excellence a habit. Coovright British Standards BS EN ISO 14732:2013 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 14732:2013.It supersedes BS EN 1418:1998 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee WEE/36 Qualification of welding personnel and welding procedures. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. ©The British Standards Institution2013.Published by BSI Standards Limited 2013 ISBN9780580664380 ICS25.160.01 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2013. Amendments issued since publication Date Text affected Coovright British Standards EUROPEAN STANDARD EN ISO 14732 NORME EUROPEENNE EUROPAISCHE NORM August 2013 ICS03.100.30;25.160.01 Supersedes EN 1418:1997 English Version Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013) Personnel en soudage-Epreuve de qualification des Schweifspersonal-Prufung von Bedienern und Einrichtern operateurs soudeurs et des regleurs en soudage pour le zum mechanischen und automatischen SchweiBen von soudage mecanise et le soudage automatique des metallischen Werkstoffen(ISO 14732:2013) materiaux metalliques (ISO 14732:2013) This European Standard was approved by CEN on 7 March 2013. CEN members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for givi...

BRITISH STANDARD BS EN ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles -Specifications and test methods (ISO 1461:2009) ICS25.220.40 BSi NO COPYING WITHOUT BSI PERMISSION EXCEPT AS.PERMITTED BY COPYRIGHT LAW British Standards No eproduction or networking wihout ioonse from IHS Not for Rosale BS EN ISO 1461:2009 National foreword This British Standard is the UK implementation of EN ISO 1461:2009.It supersedes BS EN ISO 1461:1999 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee STI/34 Hot dip galvanized coatings. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was Amendments/corrigenda issued since publication published under the authority of the Standards Policy and Strategy Date Comments Committee on 31 July 2009 BSI2009 ISBN9780580610882 Coovriaht British Standards Prowided by IHS under icense with BSI-Uncontrolled Copy No reproduction or networking wihout loense from IHS Not for Resale EUROPEAN STANDARD EN ISO 1461 NORME EUROPEENNE EUROPAISCHE NORM May 2009 ICS25.220.40 Supersedes EN ISO 1461:1999 English Version Hot dip galvanized coatings on fabricated iron and steel articles Specifications and test methods (ISO 1461:2009) Revetements par galvanisation a chaud sur produits finis Durch Feuerverzinken auf Stahl aufgebrachte Zinkuberzuge en fonte et en acier Specifications et methodes d'essaii (Stuckverzinken)-Anforderungen und Prufungen (ISO (1SO1461:2009) 1461:2009) This European Standard was approved by CEN on 30 April 2009. CEN members are bound to ply with the CEN/CENELEC Intenal Regulations which stipulate the conditions for giving this European Standard the status of a national standard w...

BRITISH STANDARD BS EN ISO 1452-5:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -Unplasticized poly(vinyl chloride) (PVC-U) Part 5:Fitness for purpose of the system(ISO1452-5:2009) IC823.040.20:23.040.45:91.140.60:93.025 BSi NO COPYING WITHOUT BSL PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW British Standards No or networking permited wthout from IHS Not ftor Ressle BS EN ISO1452-5:2009 National foreword This British Standard is the UK implementation of EN ISO 1452-5:2009. Together with BS EN ISO 1452-1:2009 BS EN ISO 1452-2:2009 BS EN ISO 1452-3:2009 and BS EN ISO 1452-4:2009 it supersedes BS EN 1452-5:1999 and BS EN 1456-1:2001 which are withdrawn. The UK participation in its preparation was entrusted to Technical Committee PRI/88/2.Plastics piping for pressure applications. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. Compliance with a British Standard cannot conferimmunity from legal obligations. This British Standard Amendments/corrigenda issued since publication was published under the authority of the Standards Policy and Strategy Date Comments Committee on 31 January 2010 BSI 2010 1SBN9780580595462 No or networking permilted wthout eanse from IHS Not for Ressle EUROPEAN STANDARD EN ISO 1452-5 NORME EUROPEENNE EUROPAISCHE NORM December 2009 ICS93.025:91.140.60:23.040.20:23.040.45 Supersedes EN1452-5:1999 EN1456-1:2001 English Version Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized poly(vinyl chloride)(PVC-U)-Part 5:Fitness for purpose of the system (ISO 1452-5:2009) Systemes de canalisations en plastique pour I'alimentation Kunststoff-Rohrleitungssysteme fur die Wasserversorgung en eau pour branchements et collecteurs dassai...

BRITISH STANDARD BS EN ISO 1452-4:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -Unplasticized poly(vinyl chloride) (PVC-U) Part 4:Valves (ISO 1452-4:2009) ICS28.040.20:23.040.45:91.140.60:93.025 BSi NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW British Standards No or networking permited wthout from IHS Not ftor Ressle BS EN ISO1452-4:2009 National foreword This British Standard is the UK implementation of EN ISO 1452-4:2009. Together with BS EN ISO 1452-1:2009 BS EN ISO 1452-2:2009 BS EN ISO 1452-3:2009 BS EN ISO 1452-5:2009 it supersedes BS EN 1452-4:1999 and BS EN 1459-1:2001 which are withdrawn. The UK participation in its preparation was entrusted to Technical Committee PRI/88/2 Plastics piping for pressure applications. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. Compliance with a British Standard cannot conferimmunity from legal obligations. This British Standard Amendments/corrigenda issued since publication was published under the authority of the Standards Policy and Strategy Date Comments Committee on 31 January 2010 BSI 2010 ISBN9780580595431 No or networking permited without from IHS Not for Ressle EUROPEAN STANDARD EN ISO 1452-4 NORME EUROPEENNE EUROPAISCHE NORM December 2009 ICS93.025:91.140.60:23.040.20:23.040.45 Supersedes EN1452-4:1999 EN1456-1:2001 English Version Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized poly(vinyl chloride)(PVC-U)-Part 4:Valves (ISO 1452-4:2009) Systemes de canalisations en plastique pour I'alimentation Kunststoff-Rohrleitungssysteme fur die Wasserversorgung en eau pour branchements et collecteurs d'assainissement und fur erdverlegte und nicht erdverlegte enterres...

BSEN1SO1452-3:2010 BSI Standards Publication Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -Unplasticized poly(vinyl chloride)(PVC-U) Part 3:Fittings (ISO 1452-3:2009 corrected version2010-03-01) NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raisina standards worldwide BSi Coovright British Standards BS EN ISO1452-3:2010 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 1452-3:2010.It is identical to ISO 1452-3:2009.It supersedes BS EN ISO 1452-3:2009 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PRI/88/2 Plastics piping for pressure applications. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. The British Standards Institution 2012 ISBN9780580717185 ICS23.040.20;23.040.45;91.140.60;93.025 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2012. Amendments issued since publication Date Text affected Coovright British Standards EUROPEAN STANDARD EN ISO 1452-3 NORME EUROPEENNE EUROPAISCHE NORM October 2010 ICS93.025:91.140.60:23.040.20:23.040.45 Supersedes EN ISO 1452-3:2009 English Version Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure- Unplasticized poly(vinyl chloride)(PVC-U)-Part 3:Fittings (ISO 1452-3:2009 corrected version 2010-03-01) Systemes de canalisations en plastique pour I'alimentation Kunststoff-Rohrleitungssysteme fur die Wasserversorgung en eau pour branchements et collecteurs d'assainissement und fur erdverlegte und nicht erdverlegte Entwasserungs- enterres et aeriens avec pressi...

BRITISH STANDARD BS EN ISO 1452-2:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -Unplasticized poly(vinyl chloride) (PVC-U) Part 2:Pipes (ISO 1452-2:2009) ICS28.040.20:23.040.45:91.140.60:93.025 BSi NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW for Standardzation British Standards No reproduction cr networking permited wthout from IHS Not ftor Ressle BS EN ISO1452-2:2009 National foreword This British Standard is the UK implementation of EN ISO 1452-2:2009. Together with BS EN ISO 1452-1:2009 BS EN ISO 1452-3:2009 BS EN ISO 1452-4:2009 BS EN ISO 1452-5:2009.it supersedes BS EN 1452-2:1999 and BS EN 1456-1:2001 which are withdrawn. The UK participation in its preparation was entrusted to Technical Committee PRI/88/2 Plastics piping for pressure applications. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. Compliance with a British Standard cannot conferimmunity from legal obligations. This British Standard Amendments/corrigenda issued since publication was published under the authority of the Standards Policy and Strategy Date Comments Committee on 31 January 2010 BSI 2010 ISBN9780580595387 No or networking permited without from IHS Not for Ressle EUROPEAN STANDARD EN ISO 1452-2 NORME EUROPEENNE EUROPAISCHE NORM December 2009 ICS91.140.60:93.025:23.040.20:23.040.45 Supersedes EN1452-2:1999 EN1456-1:2001 English Version Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized poly(vinyl chloride)(PVC-U)-Part 2:Pipes (ISO 1452-2:2009) Systemes de canalisations en plastique pour I'alimentation Kunststoff-Rohrleitungssysteme fur die Wasserversorgung en eau pour branchements et collecteurs d'assainissement und fur erdverlegte ...

BRITISH STANDARD BS EN ISO 1452-1:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -Unplasticized poly(vinyl chloride) (PVC-U) Part 1:General (ISO 1452-1:2009) ICS28.040.20:23.040.45:91.140.60:93.025 BSi NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW British Standards No or networking permited wthout from IHS Not ftor Ressle BS EN ISO1452-1:2009 National foreword This British Standard is the UK implementation of EN ISO 1452-1:2009. Together with BS EN ISO 1452-2:2009 BS EN ISO 1452-3:2009 BS EN ISO 1452-4:2009 BS EN ISO 1452-5:2009 it supersedes BS EN 1452-1:1999 and BS EN 1456-1:2001 which are withdrawn. The UK participation in its preparation was entrusted to Technical Committee PRI/88/2 Plastics piping for pressure applications. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. Compliance with a British Standard cannot conferimmunity from legal obligations. This British Standard Amendments/corrigenda issued since publication was published under the authority of the Standards Policy and Strategy Date Comments Committee on 31 January 2010 BSI 2010 1SBN9780580601644 No or networking permited wthout from IHS Not for Ressle EUROPEAN STANDARD EN ISO 1452-1 NORME EUROPEENNE EUROPAISCHE NORM December 2009 ICS91.140.60:23.040.45:23.040.20:93.025 Supersedes EN1452-1:1999 EN1456-1:2001 English Version Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized poly(vinyl chloride)(PVC-U)-Part 1:General(ISO 1452-1:2009) Systemes de canalisations en plastique pour I'alimentation Kunststoff-Rohrleitungssysteme fur die Wasserversorgung en eau pour branchements et collecteurs d'assainissement und fur erdverlegte und nicht erdverlegte Entwasse...

BS EN IEC60974-9:2018 BSI Standards Publication Arc welding equipment Part 9:Installation and use bsi. BS EN IEC60974-9:2018 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN IEC 60974-9:2018. It is identical to IEC 60974-9:2018.It supersedes BS EN 60974-9:2010 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee WEE/6 Electric arc welding equipment. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. ©The British Standards Institution2018 Published by BSI Standards Limited 2018 ISBN9780580953651 ICS25.160.30 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2018. Amendments/corrigenda issued since publication Date Text affected BS EN IEC60974-9:2018 EUROPEAN STANDARD EN IEC 60974-9 NORME EUROPEENNE EUROPAISCHE NORM June 2018 ICS25.160.30 Supersedes EN 60974-9:2010 English Version Arc welding equipment-Part 9:Installation and use (IEC60974-9:2018) Materiel de soudage a l'arc Partie 9:Installation et Lichtbogenschweifseinrichtungen-Teil 9:Errichten und utilisation Betreiben (IEC60974-9:2018) (IEC60974-9:2018) This European Standard was approved by CENELEC on 2018-06-01.CENELEC members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English French German).A version in any other language made by t...

BS EN IEC60974-7:2019 有 BSI Standards Publication Arc welding equipment Part 7:Torches bsi. Copyright British Standands rsttution Licensee=Shenzhen Instin.te of Standands and Technology 9072181 0 ided by IHS Markt under icense with BSI-Uncontroled Copy Not5 or Resale.20203/1112:11:47 No reproduction or networking permited wthout loense from IHS BS EN IEC60974-7:2019 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN IEC 60974-7:2019. It is identical to IEC 60974-7:2019.It supersedes BS EN 60974-7:2013 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee WEE/6 Electric arc welding equipment. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. ©The British Standards Institution2019 Published by BSI Standards Limited 2019 ISBN9780580981654 ICS25.160.30 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2019. Amendments/corrigenda issued since publication Date Text affected Copyright British Standands insttution Lioensee=Shenzhen Instin.te of Standands and Technology 9072181 Prowded by IHS Markit under icense with BSI-Uncontroled Copy Not or Resale.20203/1112:11:47 No reproduction or networking permitted wthout loense from IHS BS EN IEC60974-7:2019 EUROPEAN STANDARD EN IEC 60974-7 NORME EUROPEENNE EUROPAISCHE NORM November 2019 ICS25.160.30 Supersedes EN 60974-7:2013 and all of its amendments and corrigenda (if any). English Version Arc welding equipment-Part 7:Torches (IEC60974-7:2019) Materiel de soudage a I'arc-Partie 7:Torches LichtbogenschweiBeinrichtungen-Teil 7:Brenner (IEC60974-7:2019) (IEC60974-7:2019) This European Standard was approved by CENELEC on ...

BS EN IEC60974-5:2019 BSI Standards Publication Arc welding equipment Part 5:Wire feeders (IEC 60974-5:2019) bsi. BS EN IEC60974-5:2019 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN IEC 60974-5:2019. It is identical to IEC 60974-5:2019.It supersedes BS EN 60974-5:2013 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee WEE/6 Electric arc welding equipment. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. ©The British Standards Institution2019 Published by BSI Standards Limited 2019 ISBN9780580981661 ICS25.160.01;25.160.30 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2019. Amendments/corrigenda issued since publication Date Text affected BS EN IEC60974-5:2019 EUROPEAN STANDARD EN IEC 60974-5 NORME EUROPEENNE EUROPAISCHE NORM April 2019 ICS25.160.30 Supersedes EN 60974-5:2013 English Version Arc welding equipment-Part 5:Wire feeders (IEC60974-5:2019) Materiel de soudage a l'arc-Partie 5:Devidoirs LichtbogenschweiBeinrichtungen-Teil 5: (1EC60974-5:2019) Drahtvorschubgerate (IEC60974-5:2019) This European Standard was approved by CENELEC on 2019-03-06.CENELEC members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English French German).A version in any other language made by translatio...

BS EN IEC60974-13:2021 BSI Standards Publication Arc welding equipment Part 13:Welding current return clamp bsi. BS EN IEC60974-13:2021 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN IEC 60974-13:2021. It is identical to IEC 60974-13:2021.It supersedes BS EN 60974-13:2011 which will be withdrawn on 21 December 2021. The UK participation in its preparation was entrusted to Technical Committee WEE/6 Electric arc welding equipment. A list of organizations represented on this mittee can be obtained on request to its mittee manager. Contractual and legal considerations This publication has been prepared in good faith however no representation warranty assurance or undertaking (express or implied)is or will be made and no responsibility or liability is or will be accepted by BSI in relation to the adequacy accuracy pleteness or reasonableness of this publication.All and any such responsibility and liability is expressly disclaimed to the full extent permitted by the law. This publication is provided as is and is to be used at the recipient's own risk. The recipient is advised to consider seeking professional guidance with respect to its use of this publication. This publication is not intended to constitute a contract.Users are responsible for its correct application. This publication has been prepared under a mandate given to the European Standards Organizations by the European Commission and the European Free Trade Association.It is intended to support requirements of the EU legislation detailed in the European Foreword.A European Annex usually Annex ZA or ZZ describes how this publication relates to that EU legislation. For the Great Britain market (England Scotland and Wales) if UK Government has designated this publication for conformity with UKCA marking (or similar)legislation it may contain an additional National Annex.Where such a National Annex exists it shows the correlation between this publication and the rele...

BS EN IEC60974-11:2021 BSI Standards Publication Arc welding equipment Part 11:Electrode holders bsi. BS EN IEC60974-11:2021 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN IEC 60974-11:2021. It is identical to IEC 60974-11:2021.It supersedes BS EN 60974-11:2010 which will be withdrawn on 21 December 2021. The UK participation in its preparation was entrusted to Technical Committee WEE/6 Electric arc welding equipment. A list of organizations represented on this mittee can be obtained on request to its mittee manager. Contractual and legal considerations This publication has been prepared in good faith however no representation warranty assurance or undertaking (express or implied)is or will be made and no responsibility or liability is or will be accepted by BSI in relation to the adequacy accuracy pleteness or reasonableness of this publication.All and any such responsibility and liability is expressly disclaimed to the full extent permitted by the law. This publication is provided as is and is to be used at the recipient's own risk. The recipient is advised to consider seeking professional guidance with respect to its use of this publication. This publication is not intended to constitute a contract.Users are responsible for its correct application. This publication has been prepared under a mandate given to the European Standards Organizations by the European Commission and the European Free Trade Association.It is intended to support requirements of the EU legislation detailed in the European Foreword.A European Annex usually Annex ZA or ZZ describes how this publication relates to that EU legislation. For the Great Britain market (England Scotland and Wales) if UK Government has designated this publication for conformity with UKCA marking (or similar)legislation it may contain an additional National Annex.Where such a National Annex exists it shows the correlation between this publication and the relevant UK leg...