This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E2296-21 INTERNATIONAL Standard Practice for Silver Corrections in Metal Bearing Ores Concentrates and Related Metallurgical Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry' This standard is issued under the fixed designation E2296:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope E882 Guide for Accountability and Quality Control in the 1.1 This practice covers the silver loss correction utilizing Chemical Analysis Laboratory slag recycling and cupellation of proof silver during the fire 2.2 ISO Documents:3 assay of metal bearing ores concentrates and related metal- ISO 35:2006 Certificatio...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E2295-21 INTERNATIONAL Standard Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores Concentrates and Related Metallurgical Materials by Silver Determination in Slags and Cupels This standard is issued under the fixed designation E2295:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope E50 Practices for Apparatus Reagents and Safety Consid- 1.1 This practice covers the determination of silver correc- erations for Chemical Analysis of Metals Ores and tions for fire assay of metal bearing ores concentrates and Related Materials related metallurgical materials using the spent slags and cu...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E2177-20 INTERNATIONAL Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings using the Bucket Method in a Condition of Wet Recovery This standard is issued under the fixed designation E2177;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript cpsilon (a)indicates an cditorial change sincc the last revision or rcapproval. 1.Scope 1.6 This standard does not purport to address all of the 1.1 This test method covers the measurement of the wet safety concerns if any associated with its use.It is the retroreflective (R properties of horizontal pavement marking responsibility of the user of this standard to establish appro- materials such as traffic stri...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E2016-20 NTERNATIONAL Standard Specification for Industrial Woven Wire Cloth1 This standard is issued under the fixed designation E2016;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (E)indicates an editorial change since the last revision or reapproval. INTRODUCTION Industrial wire cloth can be produced in many thousands of binations of size and shape of opening wire diameter type of weave and metal.This specification covers woven wire cloth for industrial use including the separation of particles.Its purpose is to introduce standard terms and definitions to note the normal range of specifications woven and to establish tolerances and requirements.This specification excludes siev...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standardis Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E1839-20 INTERNATIONAL Standard Practice for Efficacy of Slimicides for the Paper Industry-Bacterial and Fungal Slime This standard is issued under the fixed designation E1839;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope 2.2 TAPPI Standard: T 205 Forming Handsheets for Physical Tests of Pulp 1.1 This practice presents a procedure to evaluate the 2.3 CFR Standard: efficacy of slimicides for the control of bacterial and fungal 40 CFR Part 160 Good Laboratory Practice Standards slimes in paper mill systems and their counterparts. 1.2 It is the responsibility of the investigator to determine 3.Terminology...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standardis.Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E1740-20a An American National Standard INTERNATIONAL Standard Test Method for Determining the Heat Release Rate and Other Fire-Test- Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter This standard is issued under the fixed designation E1740;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (s)indicates an editorial change since the last revision or reapproval. INTRODUCTION This test method provides a means for measuring the fire-test-response characteristics of wall coverings ceiling coverings wall covering posites and ceiling covering posites using a bench-scale oxygen consumption calorimeter. 1.Scope* 1.7 This standard is used to...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standardis.Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E1728/E1728M-20 INTERNATIONAL Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination This standard is issued under the fixed designation E1728/E1728M:the number immediately following the designation indicates the year of original adoption or.in the case of revision.the year of last revision.A number in parentheses indicates the year of last reapproval. A superseript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope Development of International Standards Guides and Re- 1.1 This practice covers the collection of settled lead- mendations issued by the World Trade Organization Technical containing dust on surfaces using the wipe sampling method. Barriers to Trade (TBT)Committee. These samples are collected in a manner that will permit 2.Referenced Documents s...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standardis.Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E1606-20 INTERNATIONAL Standard Practice for Electromagnetic (Eddy Current)Examination of Copper and Aluminum Redraw Rod for Electrical Purposes' This standard is issued under the fixed designation E1606:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope* 2.Referenced Documents 1.1 This practice covers the procedures that shall be fol- 2.1 ASTM Standards:2 lowed in electromagnetic (eddy current)examination of copper E543 Specification for Agencies Performing Nondestructive and aluminum redraw rods for detecting discontinuities or Testing imperfections of a severity likely to cause failure or markedly E1316 T...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E1568-21 INTERNATIONAL Standard Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry This standard is issued under the fixed designation E1568:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (8)indicates an editorial change since the last revision or reapproval. 1.Scope erations for Chemical Analysis of Metals Ores and 1.1 This test method covers the determination of gold in Related Materials activated carbon by fire assay collection and gravimetric E135 Terminology Relating to Analytical Chemistry for measurement.It covers the range of 15 ug/g to 5000 ug/g gold. Metals Ores and Related Materials E173 Practice for Conducting Interlaboratory Studies of 1.2...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E1190-21 INTERNATIONAL Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members1 This standard is issued under the fixed designation E1190:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (8)indicates an editorial change since the last revision or reapproval. 1.Scope Building Constructions Elements Connections and As- 1.1 These test methods describe procedures for determining semblies the static axial tensile and shear strengths of power-actuated E631 Terminology of Building Constructions fasteners installed in structural members made of concrete E2265 Terminology for Anchors and Fasteners in Concrete concrete masonry and steel. and Masonry 2.2 ANSI Standard:3 1.2 These test methods are intended for use with fasteners ANSI A10.3 Safety Requirements for Powder-Actuated Fas- that are installed perpendicular to a plane surface of the tening Systems structural member. 1.3 Tests for bined tension and shear fatigue dynamic 3.Terminology and to...

This international standard was developed in accordanee with internationalyreognized principles on standardization established in the Decison on Principles for the Development of International Standards, Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation:D8436-22 INTERNATIONAL StandardSpecificationfor Fluoropolymer-basedMaterialsforUseforEncapsulationof DownholeCable1 jo eaf oq sajopu uogeu3(sap oqp Susooy <jpeipouul aqunu oq (9et8q uogeu3isap poxiy oq apun ponss! s! pmpueps suL original adoption o, in the case of revision, the year of last revision. A number in parenthees indicats the year of last reapproval. A superscript epsilon (e) indicates an editorial change since the last revision or reapproval. 1. Scopeization established in the Decision on Principles for the 1.1 This specification covers thermoplastic fluoropolymer-Development ofInternationalStandards,Guidesand Re- based materials, intended for use as an encapsulation material mendationsissued by theWorld Trade Organization Technical for downhole cables used during well pletion by the Barriers to Trade (TBT) Committee. petroleum and natural gas industries.2.Referenced Documents 1.2 The fluoropolymers covered by this specification in-2.1 ASTM Standards:2 clude but are not limited to the following: ethylene tetrafluo- D543 Practices for Evaluating the Resistance of Plastics to roethylene (ETFE),polyethylene chlorotetrafluoroethylene Chemical Reagents (ECTFE), fuorinated ethylene propylene (FEP), polyvi-D618Practice for Conditioning Plastics for Testing nylidene fluoride (PVDF), copolymers of PVDF, polychloro- D638Test Method forTensileProperties ofPlastics trifluoroethylene (PCTFE),polytetrafluoroethylene (PTFE), D883Terminology Relating toPlastics and perfluoroalkoxy alkane (PFA). D975 Specification for Diesel Fuel 1.3 This specification establishes mon temperature rat-D1708 Test Method for Tensile Properties of Plastics by Use...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:D8428-21 INTERNATIONAL Standard Guide for Establishing Analyst Competence to Perform a Test Method1 This standard is issued under the fixed designation D8428:the number immediately following the designation indicates the year of original adoption or.in the case of revision.the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (s)indicates an editorial change since the last revision or reapproval. 1.Scope 2.Referenced Documents 1.1 This guide covers general guidance on assessing the 2.1 ASTM Standards:2 petence of an analyst to perform a specific test method for D6299 Practice for Applying Statistical Quality Assurance a specific product or set of products (for example light and Control Charting Techniques to Evaluate Analytical distillates).It also provides guidance on some of the possible Measurement...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:D8257/D8257M-22 INTERNATIONAL Standard Specification for Mechanically Attached Polymeric Roof Underlayment Used in Steep Slope Roofing' This standard is issued under the fixed designation D8257/D8257M:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope Shingles Used in Roofing and Waterproofing 1.1 This specification addresses mechanically attached D751 Test Methods for Coated Fabrics polymeric roof underlayment used in steep slope roofing. D1079 Terminology Relating to Roofing and Waterproofing D1204 Test Method for Linear Dimensional Changes of 1.2 The objective of this specification is to provide a Nonrigid...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:D8123-22 INTERNATIONAL Standard Test Methods for Measuring the Opening Size of Geohazard Nettings1 This standard is issued under the fixed designation D8123:the number immediately following the designation indicates the year of original adoption or in the case of revision.the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (s)indicates an editorial change since the last revision or reapproval. 1.Scope 1.4 This standard does not purport to address all of the 1.1 These test methods are index tests to measure the safety concerns if any associated with its use.It is the opening size of a geohazard netting or its ponents or both responsibility of the user of this standard to establish appro- as it has been manufactured.They can be used for estimating priate safety health and environmental practices and d...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:D8062-22 INTERNATIONAL Standard Specification for Purified Terephthalic Acid (PTA)with Low p-Toluic Acid1 This standard is issued under the fixed designation D8062:the number immediately following the designation indicates the year of original adoption or in the case of revision.the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (s)indicates an editorial change since the last revision or reapproval. 1.Scope* Terephthalic Acid by Capillary Electrophoresis with Re- 1.1 This specification covers purified terephthalic acid verse Voltage Mode (PTA)for use in the production of polyesters for superfine D7882 Test Method for Determination of denier fiber. 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Nor- 1.2 The following applies to all specified limi...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:D7844-21 INTERNATIONAL Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry This standard is issued under the fixed designation D7844:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope be based on a rate of change of the response measured(1).2 In 1.1 This test method pertains to field-based monitoring soot either case such maintenance action limits should be deter- in diesel crankease engine oils as well as in other types of mined through statistical analysis history of the same or engine oils where soot may cont...

This International standard was developed in accordanee with internationalyreognized principles on standardization established in the Decison on Principles for the Development of International Standards, Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation:D7826-21 An American National Standard INTERNATIONAL StandardGuidefor EvaluationofNewAviationGasolinesandNewAviation GasolineAdditives' jo e o saespu uogeuisp o Susoo epa soqnu o os uogeuisap pxy oq apun pnss s ppuess su superscript epsilon (e) indicates an editorial change since the last revision or reapproval. original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A 1.Scope*1.6.1 Exception-Some industry standard methodologies 1.1 This guide provides procedures to develop data for useTable A2.2). in research reports for new aviation gasolines or new aviation gasoline additives.1.7 This standard does not purport to address all of the 1.2 This data is intended to be used by the ASTM sub-safety concerns,if any,associated with its use.It is the mittee to make a determination of the suitability of the fuel for responsibility of the user of this standard to establish appro- use as an aviation fuel in either a fleet-wide or limited capacity, priate safety,health，and environmentalpractices and deter- and tomake a determination that the proposed properties and mine theapplicability ofregulatorylimitationspriorto use. criteria in the associated standard specification provide the1.8 This international standardwas developed inaccor- necessary controls to ensure this fuel maintains this suitability dancewithinternationallyrecognizedprinciples onstandard- during high-volume production. izationestablishedintheDecisiononPrinciples for the 1.3 These research reports are intended to support theDevelopment ofInternationalStandards,Guides andRe- mendationsissuedby theWorldTrade...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Deision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. Designation:D7415-21 INTERNATIONAL StandardTestMethodfor ConditionMonitoringofSulfateBy-ProductsinIn-Service PetroleumandHydrocarbonBasedLubricantsbyTrend AnalysisUsingFourierTransformInfrared(FT-iR) Spectrometry This standard is issued under the fixed designation D7415; the number immediately following the designation indicates the year of original apiorasfrevisn er flst revisieprethndcat th yarf lstrapprval superscript psilon (e) indicates an diorial change since the last revision or reapproval. 1.Scope* for a single measurement or alternatively can be based on a 1.1 This test method covers monitoring sulfate by-products rate of change of the response measured see Ref (1）. in in-service petroleum and hydrocarbon based diesel crank- 1.4.1 For direct trend analysis values are recorded directly caseengineandmotoroilsthathaveasulfurcontentofgreater from absorption spectra and reported in units of absorbance per than 500 ppm. This test method should not be employed when 0.1 mm pathlength. low-sulfur fuels are used for bustion. 1.4.2 For differential trend analysis values are recorded from the differential spectra (spectrum obtained by subtraction 1.2 This test method uses Fourier Transform Infrared (FT- of the absorption spectrum of the reference oil from that of the IR) spectrometry for monitoring build-up of sulfate by- in-service oilandreported in units of 100*absorbance per products in in-service petroleum and hydrocarbon based lubri- 0.1 mm pathlength (or equivalently absorbance units per cen- cants as a result of normal machinery operation. Sulfate timetre). by-products can result from the introduction of sulfur from 1.4.3 In either case maintenanc...

Gate Globe and Check Valves for Sizes DN 100 (NPS 4)and Smaller for the Petroleum and Natural Gas Industries API STANDARD 602 ELEVENTH EDITION MAY 2022 AP American Petroleum Institute Copyright American Petroloum Irstitute Special Notes API publications necessarily address problems of a general nature.With respect to particular circumstances local state and federal laws and regulations should be reviewed.The use of API publications is voluntary.In some cases third parties or authorities having jurisdiction may choose to incorporate API standards by reference and may mandate pliance. Neither API nor any of API's employees subcontractors consultants mittees or other assignees make any warranty or representation either express or implied with respect to the accuracy pleteness or usefulness of the information contained herein or assume any liability or responsibility for any use or the results of such use of any information or process disclosed in this publication.Neither API nor any of API's employees subcontractors consultants or other assignees represent that use of this publication would not infringe upon privately owned rights. API publications may be used by anyone desi...

Specification for Valves API SPECIFICATION 6D TWENTY-FIFTH EDITION NOVEMBER 2021 API MONOGRAM PROGRAM EFFECTIVE DATE:NOVEMBER 2022 ERRATA 1 DECEMBER 2021 ERRATA 2 APRIL 2022 AP American Petroleum Institute Special Notes API publications necessarily address problems of a general nature.With respect to particular circumstances local state and federal laws and regulations should be reviewed.The use of API publications is voluntary.In some cases third parties or authorities having jurisdiction may choose to incorporate API standards by reference and may mandate pliance. Neither API nor any of API's employees subcontractors consultants mittees or other assignees make any warranty or representation either express or implied with respect to the accuracy pleteness or usefulness of the information contained herein or assume any liability or responsibility for any use or the results of such use of any information or process disclosed in this publication.Neither API nor any of API's employees subcontractors consultants or other assignees represent that use of this publication would not infringe upon privately owned rights. API publications may be used by anyone desiring to do so.E...