This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E3311/E3311M-21 INTERNATIONAL Standard Test Method for Evaluating Response Robot Mobility Using Variable Diagonal Rail Obstacles1 This standard is issued under the fixed designation E3311/E3311M:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval. A superscript epsilon (e)indicates an editorial change since the last revision or reapproval. INTRODUCTION The robotics munity needs ways to measure whether a particular robot is capable of performing specific missions in plex unstructured and often hazardous environments.These missions require various binations of elemental robot capabilities.Each capability can be represented as a test method with an associated apparatus to provide tangible challenges for various mission requirements and performance metrics to municate results.These test methods can then be bined and sequenced to evaluate essential robot capabilities and remote operator proficiencies necessary to successfully perform intended missions. The ASTM International Standards Committee...

This internationl standard was developed in accordance with internationally recognized principles on standardization established in the Deision onPrinciples for the Development of International Standards, Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. Designation:E3310/E3310M-21 INTERNATIONAL StandardTestMethodfor EvaluatingResponseRobotMobilityAcrossParallel Rails1 Thisstadd isiddsinati33M; tditlyfolwndigndica oforiglir,nt casef reisn, th yar f last rvin.An in path inicas th af larpl. A superscript epsilon (e) indicates an editorial change since the last revision or reapproval. INTRODUCTION The robotics munity needs ways to measure whether a particular robot is capable of performing specific missions in plex,unstructured,and often hazardous,environments.These missions require various binations of elemental robot capabilities.Each capability can be represented as a test method with an associated apparatus to provide tangible challenges for various mission requirements and performance metrics to municate results. These test methods can then be bined and sequenced to evaluate essential robot capabilities and remote operator proficiencies necessary to successfully perform intended missions. The ASTMIntermational Standards Committe on HomelandSecurity Applications (E54) specifies these standard test methods to facilitate parisons across different testing locations and dates for diverse robot sizes and configurations.These standards support robot researchersmanufacturersand user organizations in different ways. Researchers use the standards to understand mission requirements,encourage innovation,and demonstrate break-through capabilities.Manufacturers use the standards to evaluate design decisions,integrate emerging technologies,and harden systems. Emergency responders and soldiers use them to guide purchasing decisions, align deployment expectations,and focus training with standard measures of operator profici...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E3241-20 INTERNATIONAL Standard Guide for Coordination and Cooperation between Facilities Local Emergency Planning Committees and Emergency Responders This standard is issued under the fixed designation E3241;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript cpsilon (a)indicates an cditorial change sincc the last revision or rcapproval. 1.Scope stakeholders in the preparedness planning process and each 1.1 This guide covers new and anticipated state and federal munity needs to think expansively when inviting partici- pants to the process. regulatory programs that create an obligation to“coordinate and cooperate"on emergency preparedness planning between 1.2 This standard does not purport to ...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E3240-20 NTERNATIONAL Standard Guide for Risk-Based Corrective Action for Contaminated Sediment Sites This standard is issued under the fixed designation E3240:the number immediately following the designation indicates the year of original adoption or.in the case of revision.the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (e)indicates an editorial change since the last revision or reapproval. INTRODUCTION This guide provides a framework for the development of a Risk-Based Corrective Action (RBCA) process for contaminated sediment sites (Sediment-RBCA)that integrates ecological and human health risk-based decision making into the corrective action process.Sediment-RBCA guide parallels the RBCA frameworks in Guides E2081 and E2205/E2205M with respect to the tiered approach for data gathering evaluati...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E3236/E3236M-20 INTERNATIONAL Standard Specification for Ballistic-resistant Barriers Used in Homeland Security or Public Safety Applications This standard is issued under the fixed designation E3236/E3236M:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval. A superscript epsilon (a)indicates an editorial change since the last revision or reapproval. 1.Scope 1.5.1 Stand-alone Products-Test items shall be shoot 1.1 This specification specifies requirements for ballistic- packs armor coupons or actual products mounted in a test resistant barriers to be used in homeland security or public fixture with air backing. safety applications for protection against plete penetration 1.5.2 In Conjunction Products-Test ...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standartis.Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E3234-20 INTERNATIONAL Standard Practice for Forensic Paint Analysis Training Program This standard is issued under the fixed designation E3234;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (s)indicates an editorial change since the last revision or reapproval. 1.Scope end of the paint analysis training program the trainee is 1.I This document is intended as a practice for use by capable of forming opinions based upon sound scientific laboratory personnel responsible for training examiners to knowledge appropriate examinations and practical experi- perform forensic examinations and parisons of paint.It ence.The trainee also is able to independently work cases contains a list of...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standardis.Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E3225-20 INTERNATIONAL Standard Practice for Performing a Liquid Test of Spill Prevention Equipment and Containment Sumps Used for Interstitial Monitoring of Piping by Visual Examinationt This standard is issued under the fixed designation E3225;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope responsibility of the user of this standard to establish appro- 1.1 Spill prevention equipment and containment sumps are priate safety health and environmental practices and deter- tested periodically to ensure the equipment is liguid right by mine the applicabiliry of regulatory limitations prior to use. using vacuu...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E3222-20a INTERNATIONAL Standard Classification for Determination of High-frequency Impact Sound Ratings1 This standard is issued under the fixed designation E3222:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope Ceiling Assemblies and Associated Support Structures 1.1 This classification provides methods for calculating E2179 Test Method for Laboratory Measurement of the single-number ratings of high-frequency impact sound Effectiveness of Floor Coverings in Reducing Impact transmission based on one-third-octave-band impact sound Sound Transmission Through Concrete Floors pressure levels generated by the s...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E3211-22 INTERNATIONAL Standard Practice for Selection Integration and Verification of Active Vehicle Barrier Safety Devices' This standard is issued under the fixed designation E3211:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope vehicles that are stopped.The presence of "casual"pedestrians 1.1 This practice is intended to provide methods for shall be kept away from the movable elements of the AVBS. selecting integrating and verification of active vehicle barrier 1.6 This practice is not intended to address any of the safety devices so that vehicle barrier systems are reliably and following: safely controlled when in operation. 1.6.1 Overall performance of vehicle barrier systems or 1.2 There are a number of risks associated with the opera-effectiveness as a barrier against any vehicles(see Test Method tion and use of active vehicle barrier systems (AVBS).One of F2656/F2656M). the risks is that of ...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standardis.Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E3193-20 INTERNATIONAL Standard Test Method for Measurement of Lead (Pb)in Dust by Wipe Paint and Soil by Flame Atomic Absorption Spectrophotometry (FAAS) This standard is issued under the fixed designation E3193:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope D4185 Test Method for Measurement of Metals in Work- 1.1 This test method covers the determination of lead (Pb) place Atmospheres by Flame Atomic Absorption Spectro- in dust by wipe paint and soil collected in and around photometry buildings and related structures by flame atomic absorption D4210 Practice for Intralaboratory Quality Control Proce- s...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standardis.Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E3090/E3090M-20 INTERNATIONAL Standard Test Methods for Strength Properties of Metal Ceiling Suspension Systems This standard is issued under the fixed designation E3090/E3090M;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval. A superscript epsilon (s)indicates an editorial change since the last revision or reapproval. INTRODUCTION In the past mechanical properties of metal ceiling suspension systems have been buried in other standards such as Specification C635 and Practice E580.This test method is an attempt to pull all testing requirements into one document. 1.Scope 2.Referenced Documents 1.1 These test methods cover metal ceiling suspension 2.1 ASTM Standards:2 systems used primarily to support acousti...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standartis.Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E3068-20 TU INTERNATIONAL Standard Test Method for Contact Measurement of Backface Deformation in Clay Backing During Body Armor Testing' This standard is issued under the fixed designation E3068:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope responsibility of the user of this standard to establish appro- 1.1 This test method describes test methods for the contact priate safety health and environmental practices and deter- measurement of backface deformation (BFD)in clay backing mine the applicability of regulatory limitations prior to use. caused by a test threat that produces a partial penetration in a...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E3045-21 INTERNATIONAL Standard Practice for Crack Detection Using Vibroacoustic Thermography1 This standard is issued under the fixed designation E3045:the number immediately following the designation indicates the year of original adoption or in the case of revision.the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (s)indicates an editorial change since the last revision or reapproval. 1.Scope 1.4.1 Warning-Vibroacoustic thermography requires the 1.1 Purpose-This practice covers procedures required to energization of the test article with vibrational energy.During conduct an examination of ponents using vibroacoustic energization the plete ponent may be excited with thermography. vibroacoustic(vibration)energy for as long as several seconds. The development of this test for a new applicati...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standartis.Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E3005-20 TU INTERNATIONAL Standard Terminology for Body Armor' This standard is issued under the fixed designation E3005;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (s)indicates an editorial change since the last revision or reapproval. 1.Scope 3.Terminology 1.I The scope of this terminology is to provide a standard accessory n-a body armor ponent that is detachable or terminology for body armor providing protection against removable from the body armor and is intended to provide ballistic threats stabbing fragmentation blunt impact or a extended area of coverage protection against threats that may bination of threats. include ballistic threats stabbing fragmentation blunt ...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E2936-20 INTERNATIONAL Standard Guide for Contractor Self-Assessment for U.S.Government Asset Management Systems1 This standard is issued under the fixed designation E2936;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (e)indicates an editorial change since the last revision or reapproval. INTRODUCTION The purpose of this standard is to provide guidance for a Contractor Self-Assessment (CSA) program that addresses the requirement of Federal Acquisition Regulation (FAR)52.245-1(Govern- ment Property)that contractors perform periodic reviews surveillances self-assessments or audits. This guide is intended to assist contractors in developing a CSA program that provides reasonable assura...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E276-21 INTERNATIONAL Standard Test Method for Particle Size or Screen Analysis at 4.75 mm (No.4)Sieve and Finer for Metal-Bearing Ores and Related Materials' This standard is issued under the fixed designation E276:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (8)indicates an editorial change since the last revision or reapproval. 1.Scope 3.Terminology 1.1 This test method covers the determination of the particle 3.1 Definitions: size distribution by screen analysis dry or wet of metal- 3.1.1 For definitions of terms used in this test method refer bearing ores and related materials at 4.75 mm (No.4)sieve and to Terminology E135. finer. 1.2 Units-The values stated in SI units are to...

E2661/E2661M-201 NAS-410 NAS Certification and Qualification of Nonde- damage,growing flawsand friction-based sources.For addi structive Personnel(Quality Assurance Committee) tional information, see X1.3. SNT-TC-1A RemendedforPersonnel Qualification and 4.2 This practice provides an approach to determine the Certification of Nondestructive TestingPersonnel3 localregions of origin of the AE sources andany potential local 3. Terminology regions of large accumulation(s) of AE sources. 3.1 Definitions-See Terminology E1316 for general termi- 4.3 This practice can provide an approach to use AE-based nology applicable to this practice. criteria to determine the significance of flaws. 3.2 Definitions of Terms Specific to This Standard: 5. Significance and Use 3.2.1 characteristic damage state,n-transverse matrix cracking during the virgin loading of a posite;often 5.1 This AE examination is useful to detect micro-damage resulting in reaching a limit of the crack density prior to generation,accumulation,and growth of new orexisting faws. reaching failure. The examination is also used to detect significant existing 3.2.1.1 Discussion-Results in a reduction of stiffness of the damage from friction-based AE generated during loading or posite. For additional information, see X1.2. unloading of these regions. The damage mechanisms that can be detected include matrix cracking, fiber splitting,fiber 3.2.2fat panel posite,nany fiber reinforced pos- breakage,erpull-utbondingandlamination.During ite lay-up consisting of laminas (plies) with one or more loading,unloading,and load holding,damage that does not orientations with respect to some reference direction that result in a two-dimensionallyfat article of finite thickness (typically emit AE energy will not be detected. relatively thin). 5.2When the detected signals from AE sources are sufi- 3.2.3 plate-like posite,nany fiber-reinforced pos- ciently spaced in time so as not to be classified as continuous AE,this practiceis useful ...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standardis.Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E2649-20 TU INTERNATIONAL Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy This standard is issued under the fixed designation E2649:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superseript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope ization established in the Decision on Principles for the 1.1 This test method covers procedures for using a spark Development of International Standards.Guides and Re- emission spectroscope to determine the concentration of argon mendations issued by the World Trade Organization Technical gas in the space between the lites of a sealed insulating glas...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E2579-20 An American National Standard INTERNATIONAL Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics This standard is issued under the fixed designation E2579:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (s)indicates an editorial change since the last revision or reapproval. 1.Scope 1.10 This standard does not purport to address all of the 1.1 This practice describes procedures for specimen prepa- safery concerns if any associated with its use.It is the ration and mounting when testing wood products to assess responsibility of the user of this standard to establish appro- flames spread and smoke development as surfa...

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:E2534-20 INTERNATIONAL Standard Practice for Targeted Defect Detection Using Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts This standard is issued under the fixed designation E2534;the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript cpsilon (a)indicates an cditorial change sincc the last revision or rcapproval. 1.Scope* 2.Referenced Documents 1.1 This practice describes a general procedure for using the 2.1 ASTM Standards:2 process pensated resonance testing (PCRT)via swept sine E1316 Terminology for Nondestructive Examinations input method for metallic or non-metallic parts to pare E2001 Guide for Resonant Ultrasound Spectroscopy for resonan...