BRITISH STANDARD BS EN ISO 7093-2:2000 Plain washers -Large series Part 2:Product grade C The European Standard EN ISO 7093-2:2000 has the status of a British Standard ICS21.060.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS BS EN ISO7093-2:2000 National foreword This British Standard is the official English language version of EN ISO 7093-2:2000. It is identical with ISO 7093-2:2000. The UK participation in its preparation was entrusted by Technical Committee FME/9 Bolts nuts accessories (AQ hose clamps) to Submittee FME/9/6 General purpose fasteners and accessories which has the responsibility to: -aid enquirers to understand the text; -present to the responsible international/European mittee any enquiries on the interpretation or proposals for change and keep the UK interests informed; -monitor related intemational and European developments and promulgate them in the UK. A list of organizations represented on this submittee can be obtained on request to its secretary. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative references to international publications with their corresponding European publications.The British Standards which implement these intermational or European publications may be found in the BSI Standards Catalogue under the section entitled "International Standards Correspondence Index'" or by using the“Find"facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract.Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document prises a front cover an inside front cover the EN ISO title page the EN ISO foreword page the ISO title page pages iiand iii a blank page pages 1 to 4 the annex ZA page and a back cover. The...
BRITISH STANDARD BS EN ISO 7093-1:2000 Incorporating Corrigendum No.1 Plain washers-Large series- Part 1:Product grade A The European Standard EN ISO 7093-1:2000 has the status of a British Standard ICS21.060.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW SE BS EN ISO7093-1:2000 National foreword This British Standard is the official English language version of EN ISO 7093-1:2000.It is identical with ISO 7093-1:2000 including corrigendum February 2001. The UK participation in its preparation was entrusted to Technical Committee FME/9 Bolts nuts and accessories (QA hose clamps) to Submittee FME/9/6 General purpose fasteners and accessories which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European mittee any enquiries on the interpretation or proposals for change and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this mittee can be obtained on request to its secretary. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative references to international pblications with their corresponding European publications.The British Standards which implement these international or European publications may be found in the BSI Standards Catalogue under the section entitled "International Standards Correspondence Index'" or by using the“Find"facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract.Users of British Standards are responsible for their correct application. Compliance with a British Standard does not ofitself confer immunity from legal obligations. Summary of pages This document prises a front cover an inside front cover the EN ISO title page the EN ISO foreword page the ISO page pages ii and iii a blank p...
BRITISH STANDARD BS EN ISO 7092:2000 Plain washers Small series Product Grade A The European Standard EN ISO 7092:2000 has the status of a British Standard ICS21.060.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS BS EN ISO7092:2000 National foreword This British Standard is the official English language version of EN ISO 7092:2000.It is identical with ISo 7092:2000. The UK participation in its preparation was entrusted by Technical Committee FME/9 Bolts Nuts Accessories (QA hose clamps) to Submittee FME/9/6 General Purposes Fasteners and Accessories which has the responsibility to: -aid enquirers to understand the text; -present to the responsible international/European mittee any enquiries on the interpretation or proposals for change and keep the UK interests informed; -monitor related intermational and European developments and promulgate them in the UK. A list of organizations represented on this submittee can be obtained on request to its secretary. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative references to international publications with their corresponding European publications.The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled“International Standards Correspondence Index'" or by using the“Find"facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract.Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document prises a front cover an inside front cover the EN ISO title page the EN ISO foreword page the ISO title page pages ii to iii a blank page pages 1 to 5 the annex ZA page an inside back c...
BRITISH STANDARD BS EN ISO 7091:2000 Plain washers Normal series Product Grade c The European Standard EN ISO 7091:2000 has the status of a British Standard ICS21.060.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS BS EN ISO7091:2000 National foreword This British Standard is the official English language version of EN ISO 7091:2000.It is identical with ISO 7091:2000. The UK participation in its preparation was entrusted by Technical Committee FME/9 Bolts Nuts Accessories (QA hose clamps) to Submittee FME/9/6 General Purposes Fasteners and Accessories which has the responsibility to: -aid enquirers to understand the text; -present to the responsible international/European mittee any enquiries on the interpretation or proposals for change and keep the UK interests informed; -monitor related intemational and European developments and promulgate them in the UK. A list of organizations represented on this submittee can be obtained on request to its secretary. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative references to international publications with their corresponding European publications.The British Standards which implement intermational or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled“International Standards Correspondence Index'" or by using the“Find"facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract.Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document prises a front cover an inside front cover the EN ISO title page the EN ISO foreword page the ISO title page pages ii and ii a blank page pages 1 to 4 the annex ZA page and a back cover...
BS EN ISO683-5:2021 BSI Standards Publication Heat treatable steels alloy steels and free-cutting steels Part 5:Nitriding steels bsi. Copyright British Standards insttution BS EN ISO 683-5:2021 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 683-5:2021. It is identical to ISO 683-5:2017.It supersedes BS ISO 683-5:2017 and BS EN 10085:2001 which are withdrawn. The UK participation in its preparation was entrusted to Technical Committee ISE/105 Steels for Heat Treatment Alloy Steels Free-Cutting Steels and Stainless Steels. A list of organizations represented on this mittee can be obtained on request to its mittee manager. Contractual and legal considerations This publication has been prepared in good faith however no representation warranty assurance or undertaking (express or implied)is or will be made and no responsibility or liability is or will be accepted by BSI in relation to the adequacy accuracy pleteness or reasonableness of this publication.All and any such responsibility and liability is expressly disclaimed to the full extent permitted by the law. This publication is provided as is and is to be used at the recipient's own risk. The recipient is advised to consider seeking professional guidance with respect to its use of this publication. This publication is not intended to constitute a contract.Users are responsible for its correct application. The British Standards Institution2021 Published by BSI Standards Limited 2021 ISBN9780539160536 ICS77.140.10;77.140.20 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2017. Amendments/corrigenda issued since publication Date Text affected 30June2021 This corrigendum renumbers BS ISO 683-5:2017 as BS EN ISO683-5:2021 Copyright British Standards Insttution EUROPEAN STANDARD ENISO683-5 NORME EUROPEENNE EUROPAISCHE NORM M...
BS EN ISO683-4:2018 BSI Standards Publication Heat-treatable steels alloy steels and free-cutting steels Part 4:Free-cutting steels (ISO 683-4:2016) bsi. Copyright British Standards insttution BS EN ISO 683-4:2018 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 683-4:2018. It is identical to ISO 683-4:2016.It supersedes BS EN 10087:1999 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee ISE/105 Steels for Heat Treatment Alloy Steels Free-Cutting Steels and Stainless Steels. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. CThe British Standards Institution 2018 Published by BSI Standards Limited 2018 ISBN9780580968464 ICS77.140.10;77.140.20 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2018. Amendments/corrigenda issued since publication Date Text affected Copyright British Standards Insttution EUROPEAN STANDARD ENISO683-4 NORME EUROPEENNE EUROPAISCHE NORM June 2018 ICS77.140.10:77.140.20 Supersedes EN 10087:1998 English Version Heat-treatable steels alloy steels and free-cutting steels Part 4:Free-cutting steels (ISO 683-4:2016) Aciers pour traitement thermique aciers Fur eine Warmebehandlung bestimmte Stahle allies et aciers pour decolletage-Partie 4: legierte Stahle und Automatenstahle-Teil Aciers pour décolletage(ISO683-4:2016) 4:Automatenstahle (ISO 683-4:2016) This European Standard was approved by CEN on 18 May 2018. CEN members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliog...
BS EN ISO683-3:2019 BSI Standards Publication Heat-treatable steels alloy steels and free-cutting steels Part 3:Case-hardening steels bsi. Copyright British Standards insttution BS EN ISO 683-3:2019 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 683-3:2019.It is identical to ISO 683-3:2019.It supersedes BS EN ISO 683-3:2018 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee ISE/105 Steels for Heat Treatment Alloy Steels Free-Cutting Steels and Stainless Steels. A list of organizations represented on this mittee can be obtained on request to its mittee manager. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. CThe British Standards Institution 2021 Published by BSI Standards Limited 2021 ISBN9780539016192 ICS77.140.10;77.140.20 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2021. Amendments/corrigenda issued since publication Date Text affected Copyright British Standards Insttution EUROPEAN STANDARD ENISO683-3 NORME EUROPEENNE EUROPAISCHE NORM February 2019 ICS77.140.10:77.140.20 Supersedes EN ISO 683-3:2018 English Version Heat-treatable steels alloy steels and free-cutting steels- Part 3:Case-hardening steels (ISO 683-3:2019) Aciers pour traitement thermique aciers Fūreine Warmebehandlung bestimmte allies et aciers pour decolletage-Partie 3: Stahle legierte Stahle und Automatenstahle Aciers pour cementation (ISO 683-3:2019) Teil 3:Einsatzstahle(ISO 683-3:2019) This European Standard was approved by CEN on 17 December 2018. CEN members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists a...
EUROPEAN STANDARD EN ISO5173:2010A1 NORME EUROPEENNE EUROPAISCHE NORM November 2011 ICS25.160.40 Supersedes EN 910:1996 English Version Destructive tests on welds in metallic materials Bend tests (1SO5173:2009) Essais destructifs des soudures sur materiaux metalliques Zerstorende Prufungen von SchweilSnahten an Essais de pliage (ISO 5173:2009) metallischen Werkstoffen -Biegeprufungen (ISO 5173:2009) This European Standard was approved by CEN on 18 March 2010. CEN members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concening such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English French German).A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria Belgium Bulgaria Croatia Cyprus Czech Republic Denmark Estonia. Finland France Germany Greece Hungary Iceland Ireland Italy Latvia Lithuania Luxembourg Malta Netherlands Norway Poland Portugal Romania Slovakia Slovenia Spain Sweden Switzerland and United Kingdom. cen EUROPEAN COMMITTEE FOR STANDARDIZATION COMITE EUROPEEN DE NORMALISATION EUROPAISCHES KOMITEE FOR NORMUNG Management Centre:Avenue Marnix 17 B-1000 Brussels @2010 CEN All rights of exploitation in any form and by any means reserved Ref.No.EN ISO 5173:2010:E worldwide for CEN national Members. No reproduction or networking permitted wihout loonse from IHS Not for Resale BS EN ISO5173:2010A1:2011 ENISO5173:2010A1:2011(E) Foreword The text of ISO 5173:2009 has been prepared by Technical Committee ISO/TC 44 "Welding and allied processes"of the International Orga...
BSEN1SO4136:2012 BSI Standards Publication Destructive tests on welds in metallic materials Transverse tensile test (ISO 4136:2012) NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raisina standards worldwide" BSi Provided by IHS und ar oensa wtn BSI-Uncontrolled Copy No eproduction or networking permithed wihout ioense from IHS Not for Fosale BS EN ISO 4136:2012 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 4136:2012. It supersedes BS EN ISO 4136:2011 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee WEE/46 Non-destructive testing. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. The British Standards Institution 2012.Published by BSI Standards Limited 2012 ISBN9780580795701 ICS25.160.40 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2012. Amendments issued since publication Date Text affected Coovriaht British Standards Prowided by IHS under icense with BSI-Uncontrolled Copy No reproduction or networking wihout ioonse from IHS Not for Resale EUROPEAN STANDARD EN ISO 4136 NORME EUROPEENNE EUROPAISCHE NORM November 2012 ICS25.160.40 Supersedes EN ISO 4136:2011 English Version Destructive tests on welds in metallic materials Transverse tensile test(ISO 4136:2012) Essais destructifs des soudures sur materiaux metalliques- Zerstorende Prufung von SchweilBverbindungen an Essai de traction transversale (ISO 4136:2012) metallischen Werkstoffen-Querzugversuch (ISO 4136:2012) This European Standard was approved by CEN on 31 October 2012. CEN members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate...
BRITISH STANDARD BS EN ISO 22476-3:2005 A1:2011 Incorporating corrigendum February 2007 Geotechnical investigation and testing- Field testing- Part 3:Standard penetration test ICS93.020 BSi NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Coovriaht Brtish Standards British Standards Prowided by IHS under icense with BSI-Uncontrolled Copy No reproduction or networking permithed wihout ioense from IHS Not for Rosale BS EN ISO22476-3:2005A1:2011 National foreword This British Standard is the UK implementation of EN ISO 22476-3:2005A1:2011.It is identical to ISO 22476-3:2005 incorporating amendment 1:2011.It supersedes BS EN ISO 22476-3:2005 which is withdrawn. The start and finish of text introduced or altered by amendment is indicated in the text by tags.Tags indicating changes to ISO text carry the number of the ISO amendment.For example text altered by ISO amendment 1 is indicated by. The UK participation in its preparation was entrusted by Technical Committee B/526 Geotechnics to Submittee B/526/3 Site investigation and ground testing. A list of organizations represented on this Submittee can be obtained on request to its secretary. The test in this standard is included in BS 1377-9:1990(subclause 3.3) which is now withdrawn.Its use is covered in BS 5930:1999 clause 25.2 where there is reference to BS 1377-9:1990 clause 3.3. BS EN ISO 22476-3:2005A1:2011 should now be used instead. It should be noted that the new test method requires a calibration of the equipment for energy ratio (ratio of the actual energy to the theoretical energy of the hammer). This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments/corrigenda issued since publication This British Standard was Amd.No. Date Comments published under the authority of the Standards Policy and Strategy Commi...
BRITISH STANDARD BS EN ISO 22476-2:2005 A1:2011 Incorporating corrigendum February 2007 Geotechnical investigation and testing- Field testing- Part 2:Dynamic probing ICS93.020 BSi NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Coovriaht Brtish Standards British Standards Prowided by IHS under icense with BSI-Uncontrolled Copy No reproduction or networking parmitted wthout ioonse from IHS Not for Rosale BS EN ISO22476-2:2005A1:2011 National foreword This British Standard is the UK implementation of EN ISO 22476-2:2005A1:2011.It is identical with ISO 22476-2:2005 incorporating amendment 1:2011.It supersedes BS EN ISO 22476-2:2005 which is withdrawn. The 2005 publication of BS EN 22476-2 resulted in the partial supersession of BS 5930:1999 and BS 1377-9:1990 which have since been amended to withdraw conflicting information. The start and finish of text introduced or altered by amendment is indicated in the text by tags.Tags indicating changes to ISO text carry the number of the ISO amendment.For example text altered by ISO amendment 1 is indicated by. The UK participation in its preparation was entrusted by Technical Committee B/526 Geotechnics to Submittee B/526/3 Site investigation and ground testing. A list of organizations represented on B/526/3 can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments/corrigenda issued since publication This British Standard was Amd.No. Date Comments published under the authority of the Standards Policy and Strategy Committee 16932 28 February 2007 Revision of National foreword on 30 January 2006 Corrigendum No.1 31 January 2012 Implementation of ISO amendment The British Standards Institution 2012 1:2011 with CEN endorsement A1:2011 ISBN9780580749131 Copyright Brtish Standards insttuti...
BSEN1SO22476-1:2012 Incorporating corrigendum January 2013 BSI Standards Publication Geotechnical investigation and testing -Field testing Part 1:Electrical cone and piezocone penetration test NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raisina standards worldwide" BSi Coovight Brtish Provided by IHS under icense with BSI-Unoontroled Copy No reproduction or networking permited wthout loense from IHS Not for Resale BS EN ISO22476-1:2012 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 22476-1:2012. It is identical to ISO 22476-1:2012 incorporating corrigendum January 2013.It partially supersedes BS 1377-9:1990 specifically Clause 3.1 and also BS 5930:1999A2:2010 which is being revised to remove any conflicting material.Where conflict arises between BS EN ISO22476-1 and either BS1377-9:1990orBS5930:1990A2:2010 the provisions of BS EN ISO 22476-1:2012 take precedence.In BS 5930:1999A2:2010 specifically in Clause 26.3 where any mention to Clause 3.1 in BS 1377-9:1990 or to the 'International Reference Test Procedure'is found they should all be replaced by a reference to BS EN ISO22476-1:2012. ISO corrigendum January 2013 replaced Figure 4 with a corrected figure. The UK participation in its preparation was entrusted by Technical Committee B/526 Geotechnics to Submittee B/526/3 Site investigation and ground testing. A list of organizations represented on this submittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. @The British Standards Institution 2013. Published by BSI Standards Limited 2013 ISBN9780580771217 ICS93.020 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2013. Amendments/corrigenda issued since...
BSENISO2063-1:2019
BSIStandardsPublication
Thermal spraying - Zinc, aluminium and their alloys Part1: Design considerations and quality requirements forcorrosionprotectionsystems
bsi.
BS EN ISO 2063-1:2019 BRITISH STANDARD
National foreword ThisBritish Standard is the UK implementation of EN ISO 2063-1:2019. It is identical to ISQ 2063-1:2019.It supersedes BS EN ISO 2063-1:2017, which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee STi/40,Thermal spraying and thermally sprayed coatings. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British StandardsInstitution 2019 Published by BSI Standards Limited 2019 ISBN 978 0 539 01788 5 ICS 25.220.40; 25.220.20 CompliancewithaBritishStandardcannot conferimmunityfrom legal obligations. ThisBritish Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2019. Amendments/corrigendaissuedsincepublication Date Text affected
EUROPEANSTANDARD ENISO 2063-1 NORMEEUROPEENNE EUROPAISCHE NORM March 2019
ICS 25.220.20; 25.220.40 Supersedes EN ISO 2063-1:2017
English Version Thermal spraying -Zinc, aluminium and and their alloys -Part1:Designconsiderationsandqualityrequirements for corrosion protection systems (Is0 2063-1:2019) Projection thermique - Zinc, aluminium et alliages de Thermisches Spritzen - Zink, Aluminium und ces metaux - Partie 1: Considerations de conception ihre Legierungen - Teil 1: Bauteilgestaltung protection contre la corrosion (ISO 2063-1:2019) et exigences de qualite pour les systemes de Korrosionsschutzsysteme (ISO 2063-1:2019) This European Standard was approved by CEN on 8 February 2019. this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical CEN members are bound to pl...
BRITISH STANDARD BS EN ISO 18286:2010 Hot-rolled stainless steel plates- Tolerances on dimensions and shape (ISO18286:2008) ICS77.140.50 BSi NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW British Standards Coovriaht Brtish Standards Prowided by IHS under ioense with BSI-Unoontrolled Copy No reproduction or networking permitted wihout ioense from IHS Not for Rosale BS EN ISO18286:2010 National foreword This British Standard is the UK implementation of EN ISO 18286:2010. It is identical to ISO 18286:2008. The UK participation in its preparation was entrusted to Technical Committee ISE/105 Steels for Heat Treatment Alloy Steels Free- Cutting Steels and Stainless Steels. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard Amendments/corrigenda issued since publication was published under the authority of the Standards Policy and Strategy Date Comments Committee on 31 July 2010 eBSI 2010 ISBN9780580707490 Coovriaht British Standards Prowided by IHS under icense with BSI-Uncontrolled Copy No reproduction or networking wihout ioense from IHS Not for Fesale EUROPEAN STANDARD EN ISO 18286 NORME EUROPEENNE EUROPAISCHE NORM June 2010 ICS77.140.50 English Version Hot-rolled stainless steel plates Tolerances on dimensions and shape(ISO18286:2008) Toles en acier inoxydable laminees a chaud-Tolerances Warmgewalztes Blech aus nichtrostendem Stahl- sur les dimensions et la forme (ISO 18286:2008) GrenzabmaBe und Formtoleranzen (ISO 18286:2008) This European Standard was approved by CEN on 20 May 2010. CEN members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard with...