BSEN13369:2018 BSI Standards Publication Common rules for precast concrete products bsi. European Committee for Standardiaaton Licensee-Chongqing Insitute of quaity and Standardizafonb 5000390 Provided by IHS Markit under license with CEN Not for Resale.2018/9/30 01-53:45 No reproduction or networking permitted wthout loense from IHS BSEN13369:2018 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 13369:2018.It supersedes BS EN 13369:2013 which is withdrawn. Annex A contains guidance on exposure classes and the minimum concrete cover to reinforcement for precast concrete products.For concrete exposed to environmental conditions in the UK there is guidance on the quality of concrete and minimum remended cover for durability in Annex A of BS 8500-1:2015A1:2016 Concrete -Complementary British Standard to BS EN 206-Part 1:Method of specifying and guidance for the specifier. For particular applications the UK mittee remends users refer to the following standards: For agricultural buildings: BS5502-21:1990 Buildings and structures foragriculture-Part21: Code of practice for selection and use of construction materials BS5502-22:2003A1:2013 Buildings and structures for agriculture -Part 22:Code of practice for design construction and loading For maritime works: BS6349-1-4:2013 Maritime works-Part1-4:General-Code of practice for materials. The UK participation in its preparation was entrusted to Technical Committee B/524 Precast concrete products. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. ©The British Standards Institution2018 Published by BSI Standards Limited 2018 ISBN9780580970122 ICS91.100.30 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authorit...

BSEN13055:2016 BSI Standards Publication Lightweight aggregates bsi. European Committee for Standardizafon Lioensee-SHENZHEN ACADEMY OF STANDARDIZATION 9972181 Prowded by IHS under loense with CEN Not for Resale 2016/72205:39:45 No reproduction or networking permtted wihout from IHS BSEN13055:2016 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 13055:2016.It supersedes BS EN 13055-1:2002 and BS EN 13055-2:2004 which are withdrawn. The UK participation in its preparation was entrusted to Technical Committee B/502/5 Lightweight aggregates. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. ©The British Standards Institution2016.Published by BSI Standards Limited 2016 ISBN9780580875069 ICS91.100.15 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2016. Amendments issued since publication Date Text affected Licensee-SHENZHEN ACADEMY OF STANDARDIZATION 9972181 No.for Re5ae 2016/7i2205:39:45 No reproduction or networking permtted wihout ioonse from IHS BSEN13055:2016 EUROPEAN STANDARD EN13055 NORME EUROPEENNE EUROPAISCHE NORM May 2016 ICS91.100.15 Supersedes EN13055-1:2002 EN13055-2:2004 English Version Lightweight aggregates Granulats legers Leichte Gesteinskornungen This European Standard was approved by CEN on 18 March 2016. CEN members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European St...

BSEN12390-7:2019 BSI Standards Publication Testing hardened concrete Part 7:Density of hardened concrete bsi. Copyright British Standards insttution BSEN12390-7:2019 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 12390-7:2019.It supersedes BS EN 12390-7:2009 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee B/517/1 Concrete production and testing. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. ©The British Standards Institution2019 Published by BSI Standards Limited 2019 ISBN9780580984389 ICS91.100.30 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2019. Amendments/corrigenda issued since publication Date Text affected Copyright British Standards Insttution BSEN12390-7:2019 EUROPEAN STANDARD EN12390-7 NORME EUROPEENNE EUROPAISCHE NORM June 2019 ICS91.100.30 Supersedes EN 12390-7:2009 English Version Testing hardened concrete Part 7:Density of hardened concrete Essais pour beton durci-Partie 7:Masse volumique du Prufung von Festbeton -Teil 7:Dichte von Festbeton beton durci This European Standard was approved by CEN on 29 April 2019. CEN members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English French German).A version in any other language made by translation under the responsibili...

BRITISH STANDARD BS EN 12390-6:2009 Testing hardened concrete Part 6:Tensile splitting strength of test specimens ICS91.100.30 BSi NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Commitne for Bundardization British Standards No or natworking permitiod without from IHS Not for BSEN12390-6:2009 National foreword This British Standard is the UK implementation of EN 12390-6:2009.It supersedes BS EN 12390-6:2000 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee B/517/1 Concrete production and testing. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard Amendments/corrigenda issued since publication was published under the authority of the Standards Policy and Strategy Date Comments Committee on 30 June 2010 BSI 2010 ISBN9780580670688 Commitne for Bundardization No roproduction or oermitod without from IHS Not for Rosale BSEN12390-6:2009 EUROPEAN STANDARD EN12390-6 NORME EUROPEENNE EUROPAISCHE NORM December 2009 ICS91.100.30 Supersedes EN 12390-6:2000 English Version Testing hardened concrete Part 6:Tensile splitting strength of test specimens Essais sur beton-Partie 6:Determination de la resistance Prufung von Festbeton Teil 6:Spaltzugfestigkeit von en traction par fendage d'eprouvettes Probekorpern This European Standard was approved by CEN on 1 November 2009. CEN members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. Th...

BSEN12390-5:2019 BSI Standards Publication Testing hardened concrete Part 5:Flexural strength of test specimens bsi. Copyright British Standards insttution BSEN12390-5:2019 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 12390-5:2019.It supersedes BS EN 12390-5:2009 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee B/517/1 Concrete production and testing. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. ©The British Standards Institution2019 Published by BSI Standards Limited 2019 ISBN9780580984341 ICS91.100.30 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2019. Amendments/corrigenda issued since publication Date Text affected Copyright British Standards Insttution BSEN12390-5:2019 EUROPEAN STANDARD EN12390-5 NORME EUROPEENNE EUROPAISCHE NORM June 2019 ICS91.100.30 Supersedes EN 12390-5:2009 English Version Testing hardened concrete Part 5:Flexural strength of test specimens Essai pour beton durci-Partie 5:Resistance a la Prufung von Festbeton-Teil 5:Biegezugfestigkeit von flexion sur eprouvettes Probekorpern This European Standard was approved by CEN on 29 April 2019. CEN members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English French German).A version in any other language made b...

BSEN12390-4:2019 BSI Standards Publication Testing hardened concrete Part 4:Compressive strength-Specification for testing machines bsi. Copyright British Standards insttution BSEN12390-4:2019 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 12390-4:2019.It supersedes BS EN 12390-4:2000 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee B/517/1 Concrete production and testing. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. ©The British Standards Institution2019 Published by BSI Standards Limited 2019 ISBN9780580995392 ICS91.100.30 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2019. Amendments/corrigenda issued since publication Date Text affected Copyright British Standards Insttution EUROPEAN STANDARD EN12390-4 NORME EUROPEENNE EUROPAISCHE NORM October 2019 ICS91.100.30 Supersedes EN 12390-4:2000 English Version Testing hardened concrete-Part 4:Compressive strength -Specification for testing machines Essais pour beton durci-Partie Prufung von Festbeton-Teil 4:Bestimmung der 4:Resistance a la pression- Druckfestigkeit-Anforderungen an Prufmaschinen Caracteristiques des machines d'essai This European Standard was approved by CEN on 19 August 2019. CEN members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in t...

BSEN12390-3:2019 BSI Standards Publication Testing hardened concrete Part 3:Compressive strength of test specimens bsi. Copyright British Standards insttution BSEN12390-3:2019 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 12390-3:2019.It supersedes BS EN 12390-3:2009 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee B/517 Concrete. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. ©The British Standards Institution2019 Published by BSI Standards Limited 2019 ISBN9780580984426 ICS91.100.30 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2019. Amendments/corrigenda issued since publication Date Text affected Copyright British Standards Insttution BSEN12390-3:2019 EUROPEAN STANDARD EN12390-3 NORME EUROPEENNE EUROPAISCHE NORM June 2019 ICS91.100.30 Supersedes EN 12390-3:2009 English Version Testing hardened concrete -Part 3:Compressive strength of test specimens Essais pour beton durci-Partie 3 Resistance a la Prufung von Festbeton-Teil 3:Druckfestigkeit von pression des eprouvettes Probekorpern This European Standard was approved by CEN on 29 April 2019. CEN members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English French German).A version in any other language made by translation un...

EUROPEAN STANDARD EN12390-18 NORME EUROPEENNE EUROPAISCHE NORM March 2021 ICS91.100.30 English Version Testing hardened concrete-Part 18:Determination of the chloride migration coefficient Essais pour beton durci-Partie 18:Determination du Prufung von Festbeton-Teil 18:Bestimmung des coefficient de migration des chlorures Chloridmigrationskoeffizienten This European Standard was approved by CEN on 8 February 2021. CEN members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English French German).A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria Belgium Bulgaria Croatia Cyprus Czech Republic Denmark Estonia Finland France Germany Greece Hungary Iceland Ireland Italy Latvia Lithuania Luxembourg Malta Netherlands Norway Poland Portugal Republic of North Macedonia Romania Serbia Slovakia Slovenia Spain Sweden Switzerland Turkey and United Kingdom. cen EUROPEAN COMMITTEE FOR STANDARDIZATION COMITE EUROPEEN DE NORMALISATION EUROPAISCHES KOMITEE FUR NORMUNG CEN-CENELEC Management Centre:Rue de la Science 23 B-1040 Brussels @2021 CEN All rights of exploitation in any form and by any means reserved Ref.No.EN12390-18:2021E worldwide for CEN national Members. EN12390-18:2021(E) Contents Page European foreword. .3 1 Scope............................ 4 2 Normative reference......................................... 4 3 Terms and definition................. 4 4 SymbolS.......................................

BSEN12390-17:2019 BSI Standards Publication Testing hardened concrete Part 17:Determination of creep of concrete in pression bsi. Copyright British Standards insttution BSEN12390-17:2019 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 12390-17:2019. The UK participation in its preparation was entrusted to Technical Committee B/517/1 Concrete production and testing. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. ©The British Standards Institution2019 Published by BSI Standards Limited 2019 ISBN9780580995385 ICS91.100.30 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2019. Amendments/corrigenda issued since publication Date Text affected Copyright British Standards Insttution EUROPEAN STANDARD EN12390-17 NORME EUROPEENNE EUROPAISCHE NORM October 2019 ICS91.100.30 English Version Testing hardened concrete-Part 17:Determination of creep of concrete in pression Essais pour beton durci-Partie 17:Determination Prǖfung von Festbeton-Teil17:Bestimmung du fluage du beton en pression des Kriechens von Beton unter Druckspannung This European Standard was approved by CEN on 19 August 2019. CEN members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English French German).A version in any other language made by translation under the re...

BSEN12390-16:2019 BSI Standards Publication Testing hardened concrete Part 16:Determination of the shrinkage of concrete bsi. Copyright British Standards insttution BSEN12390-16:2019 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 12390-16:2019. The UK participation in its preparation was entrusted to Technical Committee B/517/1 Concrete production and testing. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. ©The British Standards Institution2019 Published by BSI Standards Limited 2019 ISBN9780580995378 ICS91.100.30 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2019. Amendments/corrigenda issued since publication Date Text affected Copyright British Standards Insttution EUROPEAN STANDARD EN12390-16 NORME EUROPEENNE EUROPAISCHE NORM October 2019 ICS91.100.30 English Version Testing hardened concrete-Part 16:Determination of the shrinkage of concrete Essais pour beton durci-Partie 16: Pr fung von Festbeton-Teil16: Determination du retrait du beton Bestimmung des Schwindens von Beton This European Standard was approved by CEN on 19 August 2019. CEN members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English French German).A version in any other language made by translation under the responsibility of a CEN member into its own lan...

BSEN12390-15:2019 BSI Standards Publication Testing hardened concrete Part 15:Adiabatic method for the determination of heat released by concrete during its hardening process bsi. Copyright British Standards insttution BSEN12390-15:2019 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 12390-15:2019. The UK participation in its preparation was entrusted to Technical Committee B/517/1 Concrete production and testing. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. ©The British Standards Institution2019 Published by BSI Standards Limited 2019 ISBN9780580926952 ICS91.100.30 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2019. Amendments/corrigenda issued since publication Date Text affected Copyright British Standards Insttution BSEN12390-15:2019 EUROPEAN STANDARD EN12390-15 NORME EUROPEENNE EUROPAISCHE NORM July 2019 ICS91.100.30 English Version Testing hardened concrete Part 15:Adiabatic method for the determination of heat released by concrete during its hardening process Essai pour beton durci-Partie 15:Methode Prufung von Festbeton-Teil15:Adiabatisches adiabatique de determination de la chaleur degagee Verfahren zur Bestimmung der Warme die wahrend par le beton en cours de durcissement des Erhartungsprozesses von Beton freigesetzt wird This European Standard was approved by CEN on 17 June 2019. CEN members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on appli...

BSEN12390-14:2018 BSI Standards Publication Testing hardened concrete Part 14:Semi-adiabatic method for the determination of heat released by concrete during its hardening process bsi. BSEN12390-14:2018 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 12390-14:2018. The UK participation in its preparation was entrusted to Technical Committee B/517/1 Concrete production and testing. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. The British Standards Institution2018 Published by BSI Standards Limited 2018 ISBN9780580926945 ICS91.100.30 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2018. Amendments/corrigenda issued since publication Date Text affected BSEN12390-14:2018 EUROPEAN STANDARD EN12390-14 NORME EUROPEENNE EUROPAISCHE NORM August 2018 ICS91.100.30 English Version Testing hardened concrete -Part 14:Semi-adiabatic method for the determination of heat released by concrete during its hardening process Essais pour beton durci-Partie 14:Methode semi- Prufung von Festbeton-Teil 14:Teiladiabatisches adiabatique de determination de la chaleur degagee Verfahren zur Bestimmung der Warme die wahrend par le beton en cours de durcissement des Erhartungsprozesses von Beton freigesetzt wird This European Standard was approved by CEN on 9 April 2018. CEN members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any ...

BSEN12390-13:2013 BSI Standards Publication Testing hardened concrete Part 13:Determination of secant modulus of elasticity in pression bsi. ..making excellence a habit. Coovriaht British Standards Provided by IHS under loense with BSI-Unoontroled Copy No reproduction or networking permitted wihout loonse from IHS Not for Rosale BSEN12390-13:2013 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 12390-13:2013. The UK participation in its preparation was entrusted to Technical Committee B/517/1 Concrete production and testing. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. The British Standards Institution 2013.Published by BSI Standards Limited 2013 ISBN9780580781148 1C591.100.30 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2013. Amendments issued since publication Date Text affected Coovriaht British Standards Prowided by IHS under icense with BSI-Uncontrolled Copy No reproduction or networking permitted wthout ioonse from IHS Not for Resale BSEN12390-13:2013 EUROPEAN STANDARD EN12390-13 NORME EUROPEENNE EUROPAISCHE NORM October 2013 ICS91.100.30 English Version Testing hardened concrete Part 13:Determination of secant modulus of elasticity in pression Essais pour beton durci-Partie 13:Determination du Prufung von Festbeton Teil 13:Bestimmung des module secant d'elasticite en pression Elastizitatsmoduls unter Druckbelastung (Sekantenmodul) This European Standard was approved by CEN on 21 September 2013. CEN members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard withou...

BSEN12390-11:2015 BSI Standards Publication Testing hardened concrete Part 11:Determination of the chloride resistance of concrete unidirectional diffusion bsi. ...making excellence a habit. BSEN12390-11:2015 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 12390-11:2015. It supersedes DD CEN/TS 12390-11:2010 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee B/517/1 Concrete production and testing. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. @The British Standards Institution 2015.Published by BSI Standards Limited 2015 ISBN9780580882302 ICS91.100.30 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2015. Amendments issued since publication Date Text affected BSEN12390-11:2015 EUROPEAN STANDARD EN12390-11 NORME EUROPEENNE EUROPAISCHE NORM August 2015 ICS91.100.30 Supersedes CEN/TS 12390-11:2010 English Version Testing hardened concrete Part 11:Determination of the chloride resistance of concrete unidirectional diffusion Essais pour beton durci-Partie 11 Determination de la Prufung von Festbeton-Teil 11:Bestimmung des resistance du beton a la penetration des chlorures diffusion Chloridwiderstandes von Beton-Einseitig gerichtete unidirectionnelle Diffusion This European Standard was approved by CEN on 19 June 2015. CEN members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concening such national standards may be obtained on application to the CEN-CENELEC Management ...

BSEN12390-10:2018 BSI Standards Publication Testing hardened concrete Part 10:Determination of the carbonation resistance of concrete at atmospheric levels of carbon dioxide bsi. Copyright British Standards insttution BSEN12390-10:2018 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 12390-10:2018.It supersedes DD CEN/TS 12390-10:2007 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee B/517/1 Concrete production and testing. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. ©The British Standards Institution2019 Published by BSI Standards Limited 2019 ISBN9780580964695 ICS91.100.30 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2019. Amendments/corrigenda issued since publication Date Text affected Copyright British Standards Insttution EUROPEAN STANDARD EN12390-10 NORME EUROPEENNE EUROPAISCHE NORM December 2018 ICS91.100.30 Supersedes CEN/TS 12390-10:2007 English Version Testing hardened concrete-Part 10:Determination of the carbonation resistance of concrete at atmospheric levels of carbon dioxide Essai pour beton durci-Partie 10:Determination Prǖfung von Festbeton-Teil10:Bestimmung des de la resistance a la carbonatation du beton a des Karbonatisierungswiderstandes von Beton bei niveaux atmospheriques de dioxyde de carbone atmospharischer Konzentration von Kohlendioxid This European Standard was approved by CEN on 19 October 2018. CEN members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bi...

BSEN12390-1:2012 BSI Standards Publication Testing hardened concrete Part 1:Shape dimensions and other requirements for specimens and moulds NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raisina standards worldwide" BSi Coovright British Prowided by IHS under icense with BSI-Uncontrolled Copy No reproduction or networking permitted wihout ioense from IHS Not for Fosale BSEN12390-1:2012 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 12390-1:2012. It supersedes BS EN 12390-1:2000 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee B/517/1 Concrete production and testing. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. @The British Standards Institution 2012. Published by BSI Standards Limited 2012 ISBN9780580769207 ICS91.100.30 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2012. Amendments issued since publication Date Text affected Coovriaht British Standards Prowided by IHS under icense with BSI-Uncontrolled Copy No reproduction or networking permitted wihout loonse from IHS Not for Rosale BSEN12390-1:2012 EUROPEAN STANDARD EN12390-1 NORME EUROPEENNE EUROPAISCHE NORM September 2012 ICS91.100.30 Supersedes EN 12390-1:2000 English Version Testing hardened concrete-Part 1:Shape dimensions and other requirements for specimens and moulds Essai pour beton durci-Partie 1:Forme dimensions et Prufung von Festbeton Teil 1:Form MaBe und andere autres exigences aux eprouvettes et aux moules Anforderungen fur Probekorper und Formen This European Standard was approved by CEN on 13 July 2012. CEN members are bound to ply with the C...

EUROPEAN STANDARD EN12350-7:2019/AC NORME EUROPEENNE January 2022 EUROPAISCHE NORM ICS91.100.30 English version Testing fresh concrete-Part 7:Air content-Pressure methods Essais pour beton frais-Partie 7:Teneur en Prufung von Frischbeton-Teil 7:Luftgehalt- air-Methode de la pressibilite Druckverfahren This corrigendum bees effective on 26 January 2022 for incorporation in the official English version of the EN. cen EUROPEAN COMMITTEE FOR STANDARDIZATION COMITE EUROPEEN DE NORMALISATION EUROPAISCHES KOMITEE FUR NORMUNG CEN-CENELEC Management Centre:Rue de la Science 23 B-1040 Brussels @2022 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Tous droits d'exploitation sous quelque forme et de quelque maniere que ce soit reserves dans le monde entier aux membres nationaux du CEN. Alle Rechte der Verwertung gleich in welcher Form und in welchem Verfahren sind weltweit den nationalen Mitgliedern von CEN vorbehalten. Ref.No.:EN12350-7:2019/AC:2022E EN12350-7:2019/AC:2022(E) Contents Page 1 Modification to 5.2.5 Measuring air conte.t ............................................... 2 EN12350-7:2019/AC:2022(E) 1 Modification to 5.2.5 Measuring air content Replace“(h3-h1)"with“(h3-h4)". 3 ...

TECHNICAL REPORT CEN/TR 14245 RAPPORT TECHNIQUE TECHNISCHER BERICHT March 2020 ICS91.100.10 Supersedes CEN/TR 14245:2014 English Version Cement-Guidelines for the application of EN 197-2: Assessment and verification of constancy of performance Ciment-Lignes directrices pour I'application de I'EN Zement-Richtlinien fur die Anwendung der EN 197-2: 197-2-Evaluation de la conformite Bewertung und Uberprufung der Leistungsbestandigkeit This Technical Report was approved by CEN on 8 December 2019.It has been drawn up by the Technical Committee CEN/TC 51. CEN members are the national standards bodies of Austria Belgium Bulgaria Croatia Cyprus Czech Republic Denmark Estonia Finland France Germany Greece Hungary Iceland Ireland Italy Latvia Lithuania Luxembourg Malta Netherlands Norway Poland Portugal Republic of North Macedonia Romania Serbia Slovakia Slovenia Spain Sweden Switzerland Turkey and United Kingdom. cen EUROPEAN COMMITTEE FOR STANDARDIZATION COMITE EUROPEEN DE NORMALISATION EUROPAISCHES KOMITEE FUR NORMUNG CEN-CENELEC Management Centre:Rue de la Science 23 B-1040 Brussels @2020 CEN All rights of exploitation in any form and by any means reserved Ref.No.CEN/TR 14245:2020 E worldwide for CEN national Members. CEN/TR14245:2020(E) Contents Page European foreword. 4 Introduction to this Guidelines Document............. .5 1 Scope. 6 2 Normative reference.............. 6 3 Terms and definition.................. 4 Factory production control.................. .10 4.1 General requirements....................... 10 4.1.1 Concept............. 10 4.1.2 Works'quality documentatio....................................................................................10 4.1.3 Quality management syste.....................................................................................11 4.1.4 System of documentation............ .13 4.2 Internal quality contro............................................................................................14 4.2.1 Process control. 4....

BS1SO3310-2:2013 BSI Standards Publication Test sieves Technical requirements and testing Part 2:Test sieves of perforated metal plate bsi. ..making excellence a habit. Coovriaht British Standards Provided by IHS under loense with BSI-Unoontroled Copy No rmproduction or networking permitted wthout ioonse from IHS Not for Rosale BS ISO3310-2:2013 BRITISH STANDARD National foreword This British Standard is the UK implementation of ISO 3310-2:2013.It supersedes BS 410-2:2000 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee LBI/37 Particle characterization including sieving. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. ©The British Standards Institution2013. Published by BSI Standards Limited 2013 ISBN9780580821127 1C519.120 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2013. Amendments/corrigenda issued since publication Date Text affected No reproduction or networking wihout loonse from IHS Not for Rosale BS ISO3310-2:2013 INTERNATIONAL ISO STANDARD 3310-2 Fifth edition 2013-09-01 Test sieves-Technical requirements and testing- Part 2: Test sieves of perforated metal plate Tamis de controle-Exigences techniques et verifications- Partie 2:Tamis de controle en toles metalliques perforees Reference number ISO3310-2:2013(E) ISO2013 No reproduction or networking permitted wthout loense from IHS Not for Resale BS ISO3310-2:2013 ISO3310-2:2013(E) ! COPYRIGHT PROTECTED DOCUMENT ©ISO2013 All rights reserved.Unless otherwise specified no part of this publication may be reproduced or utilized otherwise in any form or by any means electronic or mechanical including photocopying or posting on th...

BS1SO3310-1:2016 BSI Standards Publication Test sieves Technical requirements and testing Part 1:Test sieves of metal wire cloth bsi. Brissh Standares Institution Licensee-ZHEJIANG INST OF STANDARDIZATION 5966617 rovided by IHS under icense with BSI Uncontrolled Copy No.for Re5ae 2016/102100:30:35 No reproduction or networking parmitted wihout loonse from IHS BS1SO3310-1:2016 BRITISH STANDARD National foreword This British Standard is the UK implementation of ISO 3310-1:2016.It supersedes BS 410-1:2000 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee LBI/37 Particle characterization including sieving. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016 ISBN9780580833472 ICS19.120 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2016. Amendments issued since publication Date Text affected Brissh Standards Institution Licensee-ZHEJIANG INST OF STANDARDIZATION 5966617 Provided by IHS under icense with BSI-Uncontrolled Copy No.for Re5ae 2016/102100:30:35 No reproduction or networking parmitted wihout loonse from IHS B5ISO3310-1:2016 INTERNATIONAL ISO STANDARD 3310-1 Fifth edition 2016-08-15 Test sieves-Technical requirements and testing- Part 1: Test sieves of metal wire cloth Tamis de controle-Exigences techniques et verifications- Partie 1:Tamis de controle en tissus metalliques Reference number ISO3310-1:2016(E) ISO Brissh Standards Institution Licengee-ZHEJIANG INST OF STANDARDZATION 5956617 ISO2016 Provided by IHS under icense with BSI-Uncontrolled Copy Not5 or Resale.2016/10r210030:35 No reproduction or networkin...