BS EN ISO 9018:2015 BSI Standards Publication Destructive tests on welds n metallic materials—Tensile test on cruciform and lapped joints bsi. ...making excellence a habit. BS EN ISO 9018:2015 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 9018:2015. It supersedes BS EN ISO 9018:2003 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee WEE/2 Destructive Testing of Welds. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. @The British Standards Institution 2015. Published by BSI Standards Limited 2015 ISBN9780580877971 ICS25.160.40 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2015. Amendments/corrigenda issued since publication Date Text affected EUROPEAN STANDARD EN ISO 9018 NORME EUROPEENNE EUROPAISCHE NORM November 2015 ICS25.160.40 Supersedes EN ISO 9018:2003 English Version Destructive tests on welds in metallic materials-Tensile test on cruciform and lapped joints (ISO 9018:2015) Essais destructifs des soudures sur materiaux Zerstorende Prufung von SchweifBverbindungen an metalliques-Essai de traction des assemblages en metallischen Werkstoffen-Zugversuch am Doppel-T- croix et a recouvrement(ISO 9018:2015) StofB und Uberlappsto3 (ISO 9018:2015) This European Standard was approved by CEN on 26 September 2015. CEN members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Managem...
BS EN ISO 9016:2012 BSI Standards Publication Destructive tests on welds in metallic materials Impact tests Test specimen location notch orientation and examination (ISO 9016:2012) NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raisina standards worldwide" BSi Brlish Prowided by IHS under icense with BSI-Uncontrolled Copy No reproduction or networking permitted wihout ioense from IHS Not for Foosale BS EN ISO 9016:2012 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 9016:2012. It supersedes BS EN ISO 9016:2011 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee WEE/46 Non-destructive testing. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. @The British Standards Institution 2012.Published by BSI Standards Limited 2012 ISBN9780580795916 ICS25.160.40 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2012. Amendments issued since publication Date Text affected Coovriaht British Standards Prowided by IHS under icense with BSI-Uncontrolled Copy No reproduction or networking permitted wihout loonse from IHS Not for Rosale EUROPEAN STANDARD EN ISO 9016 NORME EUROPEENNE EUROPAISCHE NORM November 2012 ICS25.160.40 Supersedes EN ISO 9016:2011 English Version Destructive tests on welds in metallic materials Impact tests- Test specimen location notch orientation and examination (ISO 9016:2012) Essais destructifs des soudures sur materiaux metalliques- Zerstorende Prufung von SchweiBverbindungen an Essai de flexion par choc Position de l'eprouvette metallischen Werkstoffen-Kerbschlagbiegeversuch- orientation de I'entaille et examen (...
BS EN ISO9015-1:2011 BSI Standards Publication Destructive tests on welds in metallic materials Hardness testing Part 1:Hardness test on arc welded joints (ISO9015-1:2001) NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raisina standards worldwide BSi Provided by IHS unde ar oensa wtr BSI-Uncontrolled Copy No reproduction or networking parmitted wihout from IHS Not for Fosale BS EN ISO9015-1:2011 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 9015-1:2011.It is identical to ISO 9015-1:2001.It supersedes BS EN 1043-1:1996 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee WEE/-/1 Briefing mittee for welding. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. BS12011 ISBN9780580721021 ICS25.160.40 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2011. Amendments issued since publication Date Text affected Coovriaht British Standards Prowided by IHS under icense with BSI-Uncontrolled Copy No reproduction or networking pemitted wihout ioonse from IHS Not for Rosale EUROPEAN STANDARD EN ISO 9015-1 NORME EUROPEENNE EUROPAISCHE NORM March 2011 ICS25.160.40 Supersedes EN 1043-1:1995 English Version Destructive tests on welds in metallic materials -Hardness testing Part 1:Hardness test on arc welded joints (ISO 9015- 1:2001) Essais destructifs des soudures sur materiaux metalliques- Zerstorende Prufung von SchweiSverbindungen an Essais de durete-Partie 1:Essai de durete des metallischen Werkstoffen-Harteprufung Teil 1: assemblages soudes a l'arc(ISO 9015-1:2001) Harteprufung fur LichtbogenschweiSverbindungen (ISO 9015-1:2001) This Eur...
BS EN ISO898-3:2018A1:2021 BSI Standards Publication Fasteners-Mechanical properties of fasteners made of carbon steel and alloy steel Part 3:Flat washers with specified property classes bsi. BS EN ISO898-3:2018A1:2021 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 898-3:2018A1:2021.It is identical to ISO 898-3:2018 incorporating amendment 1:2020.Together with BS EN ISO 7091:2000 BS EN ISO7092:2000 BS EN ISO7093-1:2000 BS EN ISO7093-2:2000 and BS EN ISO 7094:2000 it supersedes BS 4320:1968 which is withdrawn.It also supersedes BS EN ISO 898-3:2018 which is withdrawn. The start and finish of text introduced or altered by amendment is indicated in the text by tags.Tags indicating changes to ISO text carry the number of the ISO amendment.For example text altered by ISO amendment 1 is indicated by A)Al. The UK participation in its preparation was entrusted to Technical Committee FME/9 Fasteners. A list of organizations represented on this mittee can be obtained on request to its mittee manager. BSI as a member of CEN is obliged to publish EN ISO 898-3:2018 as a British Standard.However attention is drawn to the fact that during the development of this European Standard the UK mittee voted against its approval. FME/9 voted to disapprove this standard for the following reason. Table 1 of ISO 898-3:2018 does not permit 100 HV washers to be used with 8.8/8 bolt and nut assemblies or with 10.9/10 bolt and nut assemblies. Bolt nut and washer assemblies using these washers are permitted in accordance with the cited harmonized standard EN 15048-1:2007 (see EN 15048-1:2007 Table 6) and are required for use in structural connections as specified in EN 1090-2 Execution of steel structures and aluminium structures -Part 2:Technical requirements for steel structures. These assemblies are used extensively in non-preloaded structural bolting in the UK and have been used successfully for well over 40 years. The function of the ...
BSEN1SO8503-4:2012 BSI Standards Publication Preparation of steel substrates before application of paints and related products-Surface roughness characteristics of blast-cleaned steel substrates Part 4:Method for the calibration of ISO surface profile parators and for the determination of surface profile-Stylus instrument procedure NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raisina standards worldwide BSi Prowded by IHS under with BSI-Uncontroled Copy No reproduction or networking wihout loense from IHS Not for Fosale BS EN ISO8503-4:2012 BRITISH STANDARD National foreword This British Standard is the UK implementation of It supersedes BS EN ISO 8503-4:1995 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee STI/21 Surface preparation of steel. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. @The British Standards Institution 2012.Published by BSI Standards Limited 2012 ISBN9780580634710 ICS17.040.20;25.220.10 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2012. Amendments issued since publication Date Text affected Coovriaht British Standards Prowided by IHS under icense with BSI-Uncontrolled Copy No reproduction or networking permitted wihout loonse from IHS Not for Resale EUROPEAN STANDARD EN ISO 8503-4 NORME EUROPEENNE EUROPAISCHE NORM February 2012 ICS25.220.10 Supersedes EN ISO 8503-4:1995 English Version Preparation of steel substrates before application of paints and related products Surface roughness characteristics of blast- cleaned steel substrates Part 4:Method for the calibration of ISO surface profile parators and for the determination of su...
BSEN1SO8503-3:2012 BSI Standards Publication Preparation of steel substrates before application of paints and related products-Surface roughness characteristics of blast-cleaned steel substrates Part 3:Method for the calibration of ISO surface profile parators and for the determination of surface profile-Focusing microscope procedure NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raisina standards worldwide BSi Prowded by IHS under ioense with BSI-Unoontrolled Copy No reproduction or networking permitted wihout ioense from IHS Not for Fosale BS EN ISO8503-3:2012 BRITISH STANDARD National foreword This British Standard is the UK implementation of It supersedes BS EN ISO 8503-3:1995 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee STI/21 Surface preparation of steel. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. @The British Standards Institution 2012.Published by BSI Standards Limited 2012 ISBN9780580634703 ICS17.040.20;25.220.10 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2012. Amendments issued since publication Date Text affected Coovriaht British Standards Prowided by IHS under icense with BSI-Uncontrolled Copy No reproduction or networking pemitted wihout ioonse from IHS Not for Rosale EUROPEAN STANDARD EN ISO 8503-3 NORME EUROPEENNE EUROPAISCHE NORM February 2012 ICS25.220.10 Supersedes EN ISO 8503-3:1995 English Version Preparation of steel substrates before application of paints and related products Surface roughness characteristics of blast- cleaned steel substrates Part 3:Method for the calibration of ISO surface profile parators and for the ...
BSEN1SO8503-2:2012 BSI Standards Publication Preparation of steel substrates before application of paints and related products -Surface roughness characteristics of blast-cleaned steel substrates Part 2:Method for the grading of surface profile of abrasive blast-cleaned steel- Comparator procedure NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BSi Copyriaht Brtish s raisinn standards worldwide" ded by IHS under Foense with BSI-Uncontrolied Copy No reproduction or networking permitted without icense from IHS Not for Resale BS EN ISO8503-2:2012 BRITISH STANDARD National foreword This British Standard is the UK implementation of It supersedes BS EN ISO 8503-2:1995 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee STI/21 Surface preparation of steel. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. @The British Standards Institution 2012.Published by BSI Standards Limited 2012 ISBN9780580634697 ICS17.040.20;25.220.10 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2012. Amendments issued since publication Date Text affected No reproduction or networking permitted wthout icense from IHS Not for Resale EUROPEAN STANDARD EN ISO 8503-2 NORME EUROPEENNE EUROPAISCHE NORM February 2012 ICS25.220.10 Supersedes EN ISO 8503-2:1995 English Version Preparation of steel substrates before application of paints and related products Surface roughness characteristics of blast- cleaned steel substrates Part 2:Method for the grading of surface profile of abrasive blast-cleaned steel-Comparator procedure (ISO 8503-2:2012) Preparation des subjectiles d'acier avant application de Vorbereitu...
BS EN ISO8503-1:2012 BSI Standards Publication Preparation of steel substrates before application of paints and related products-Surface roughness characteristics of blast-cleaned steel substrates Part 1:Specifications and definitions for ISO surface profile parators for the assessment of abrasive blast-cleaned surfaces NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raisina standards worldwide BSi Prowded by IHS under ioense with BSI-Unoontrolled Copy No reproduction or networking wihout ioonse from IHS Not for Rosale BS EN ISO8503-1:2012 BRITISH STANDARD National foreword This British Standard is the UK implementation of It supersedes BS EN ISO 8503-1:1995 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee STI/21 Surface preparation of steel. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. @The British Standards Institution 2012.Published by BSI Standards Limited 2012 ISBN9780580634680 ICS17.040.20;25.220.10 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2012. Amendments issued since publication Date Text affected Coovriaht British Standards Prowided by IHS under icense with BSI-Uncontrolled Copy No eproduction or networking wihout ioonse from IHS Not for Rosale EUROPEAN STANDARD EN ISO 8503-1 NORME EUROPEENNE EUROPAISCHE NORM February 2012 ICS25.220.10 Supersedes EN ISO 8503-1:1995 English Version Preparation of steel substrates before application of paints and related products Surface roughness characteristics of blast- cleaned steel substrates -Part 1:Specifications and definitions for ISO surface profile parators for the assessment of abrasive blast-cle...
BRITISH STANDARD BS EN ISO 7094:2000 Incorporating Technical Corrigendum No.1 Plain washers Extra large series-Product grade C The European Standard EN ISO 7094:2000 has the status of a British Standard ICS21.060.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS EN ISO7094:2000 National foreword This British Standard is the official English language version of EN ISO 7094:2000.It is identical with ISO 7094:2000 including technical corrigendum December 2000. The UK participation in its preparation was entrusted by Technical Committee FME/9 Bolts nuts and accessories (QA hose clamps) to Submittee FME/9/6 General purposes fasteners and accessories which has the responsibility to: -aid enquirers to understand the text; -present to the responsible European mittee any enquiries on the interpretation or proposals for change and keep the UK interests informed; -monitor related intermational and European developments and promulgate them in the UK. A list of organizations represented on this submittee can be obtained on request to its secretary. Cross-references The British Standards which implement these international or European publications may be found in the BSI Standards Catalogue under the section entitled “Intermational Standards Correspondence Index" or by using the“Find"facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract.Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document prises a front cover an inside front cover the EN ISO title page the EN ISO foreword page the ISO title page pages ii and iii a blank page pages 1 to 3 the annex ZA page an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. This British Standard...
BRITISH STANDARD BS EN ISO 7093-2:2000 Plain washers -Large series Part 2:Product grade C The European Standard EN ISO 7093-2:2000 has the status of a British Standard ICS21.060.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS BS EN ISO7093-2:2000 National foreword This British Standard is the official English language version of EN ISO 7093-2:2000. It is identical with ISO 7093-2:2000. The UK participation in its preparation was entrusted by Technical Committee FME/9 Bolts nuts accessories (AQ hose clamps) to Submittee FME/9/6 General purpose fasteners and accessories which has the responsibility to: -aid enquirers to understand the text; -present to the responsible international/European mittee any enquiries on the interpretation or proposals for change and keep the UK interests informed; -monitor related intemational and European developments and promulgate them in the UK. A list of organizations represented on this submittee can be obtained on request to its secretary. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative references to international publications with their corresponding European publications.The British Standards which implement these intermational or European publications may be found in the BSI Standards Catalogue under the section entitled "International Standards Correspondence Index'" or by using the“Find"facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract.Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document prises a front cover an inside front cover the EN ISO title page the EN ISO foreword page the ISO title page pages iiand iii a blank page pages 1 to 4 the annex ZA page and a back cover. The...
BRITISH STANDARD BS EN ISO 7093-1:2000 Incorporating Corrigendum No.1 Plain washers-Large series- Part 1:Product grade A The European Standard EN ISO 7093-1:2000 has the status of a British Standard ICS21.060.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW SE BS EN ISO7093-1:2000 National foreword This British Standard is the official English language version of EN ISO 7093-1:2000.It is identical with ISO 7093-1:2000 including corrigendum February 2001. The UK participation in its preparation was entrusted to Technical Committee FME/9 Bolts nuts and accessories (QA hose clamps) to Submittee FME/9/6 General purpose fasteners and accessories which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European mittee any enquiries on the interpretation or proposals for change and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this mittee can be obtained on request to its secretary. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative references to international pblications with their corresponding European publications.The British Standards which implement these international or European publications may be found in the BSI Standards Catalogue under the section entitled "International Standards Correspondence Index'" or by using the“Find"facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract.Users of British Standards are responsible for their correct application. Compliance with a British Standard does not ofitself confer immunity from legal obligations. Summary of pages This document prises a front cover an inside front cover the EN ISO title page the EN ISO foreword page the ISO page pages ii and iii a blank p...
BRITISH STANDARD BS EN ISO 7092:2000 Plain washers Small series Product Grade A The European Standard EN ISO 7092:2000 has the status of a British Standard ICS21.060.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS BS EN ISO7092:2000 National foreword This British Standard is the official English language version of EN ISO 7092:2000.It is identical with ISo 7092:2000. The UK participation in its preparation was entrusted by Technical Committee FME/9 Bolts Nuts Accessories (QA hose clamps) to Submittee FME/9/6 General Purposes Fasteners and Accessories which has the responsibility to: -aid enquirers to understand the text; -present to the responsible international/European mittee any enquiries on the interpretation or proposals for change and keep the UK interests informed; -monitor related intermational and European developments and promulgate them in the UK. A list of organizations represented on this submittee can be obtained on request to its secretary. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative references to international publications with their corresponding European publications.The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled“International Standards Correspondence Index'" or by using the“Find"facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract.Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document prises a front cover an inside front cover the EN ISO title page the EN ISO foreword page the ISO title page pages ii to iii a blank page pages 1 to 5 the annex ZA page an inside back c...
BRITISH STANDARD BS EN ISO 7091:2000 Plain washers Normal series Product Grade c The European Standard EN ISO 7091:2000 has the status of a British Standard ICS21.060.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS BS EN ISO7091:2000 National foreword This British Standard is the official English language version of EN ISO 7091:2000.It is identical with ISO 7091:2000. The UK participation in its preparation was entrusted by Technical Committee FME/9 Bolts Nuts Accessories (QA hose clamps) to Submittee FME/9/6 General Purposes Fasteners and Accessories which has the responsibility to: -aid enquirers to understand the text; -present to the responsible international/European mittee any enquiries on the interpretation or proposals for change and keep the UK interests informed; -monitor related intemational and European developments and promulgate them in the UK. A list of organizations represented on this submittee can be obtained on request to its secretary. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative references to international publications with their corresponding European publications.The British Standards which implement intermational or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled“International Standards Correspondence Index'" or by using the“Find"facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract.Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document prises a front cover an inside front cover the EN ISO title page the EN ISO foreword page the ISO title page pages ii and ii a blank page pages 1 to 4 the annex ZA page and a back cover...
BS EN ISO683-5:2021 BSI Standards Publication Heat treatable steels alloy steels and free-cutting steels Part 5:Nitriding steels bsi. Copyright British Standards insttution BS EN ISO 683-5:2021 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 683-5:2021. It is identical to ISO 683-5:2017.It supersedes BS ISO 683-5:2017 and BS EN 10085:2001 which are withdrawn. The UK participation in its preparation was entrusted to Technical Committee ISE/105 Steels for Heat Treatment Alloy Steels Free-Cutting Steels and Stainless Steels. A list of organizations represented on this mittee can be obtained on request to its mittee manager. Contractual and legal considerations This publication has been prepared in good faith however no representation warranty assurance or undertaking (express or implied)is or will be made and no responsibility or liability is or will be accepted by BSI in relation to the adequacy accuracy pleteness or reasonableness of this publication.All and any such responsibility and liability is expressly disclaimed to the full extent permitted by the law. This publication is provided as is and is to be used at the recipient's own risk. The recipient is advised to consider seeking professional guidance with respect to its use of this publication. This publication is not intended to constitute a contract.Users are responsible for its correct application. The British Standards Institution2021 Published by BSI Standards Limited 2021 ISBN9780539160536 ICS77.140.10;77.140.20 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2017. Amendments/corrigenda issued since publication Date Text affected 30June2021 This corrigendum renumbers BS ISO 683-5:2017 as BS EN ISO683-5:2021 Copyright British Standards Insttution EUROPEAN STANDARD ENISO683-5 NORME EUROPEENNE EUROPAISCHE NORM M...
BS EN ISO683-4:2018 BSI Standards Publication Heat-treatable steels alloy steels and free-cutting steels Part 4:Free-cutting steels (ISO 683-4:2016) bsi. Copyright British Standards insttution BS EN ISO 683-4:2018 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 683-4:2018. It is identical to ISO 683-4:2016.It supersedes BS EN 10087:1999 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee ISE/105 Steels for Heat Treatment Alloy Steels Free-Cutting Steels and Stainless Steels. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. CThe British Standards Institution 2018 Published by BSI Standards Limited 2018 ISBN9780580968464 ICS77.140.10;77.140.20 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2018. Amendments/corrigenda issued since publication Date Text affected Copyright British Standards Insttution EUROPEAN STANDARD ENISO683-4 NORME EUROPEENNE EUROPAISCHE NORM June 2018 ICS77.140.10:77.140.20 Supersedes EN 10087:1998 English Version Heat-treatable steels alloy steels and free-cutting steels Part 4:Free-cutting steels (ISO 683-4:2016) Aciers pour traitement thermique aciers Fur eine Warmebehandlung bestimmte Stahle allies et aciers pour decolletage-Partie 4: legierte Stahle und Automatenstahle-Teil Aciers pour décolletage(ISO683-4:2016) 4:Automatenstahle (ISO 683-4:2016) This European Standard was approved by CEN on 18 May 2018. CEN members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliog...
BS EN ISO683-3:2019 BSI Standards Publication Heat-treatable steels alloy steels and free-cutting steels Part 3:Case-hardening steels bsi. Copyright British Standards insttution BS EN ISO 683-3:2019 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 683-3:2019.It is identical to ISO 683-3:2019.It supersedes BS EN ISO 683-3:2018 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee ISE/105 Steels for Heat Treatment Alloy Steels Free-Cutting Steels and Stainless Steels. A list of organizations represented on this mittee can be obtained on request to its mittee manager. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. CThe British Standards Institution 2021 Published by BSI Standards Limited 2021 ISBN9780539016192 ICS77.140.10;77.140.20 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2021. Amendments/corrigenda issued since publication Date Text affected Copyright British Standards Insttution EUROPEAN STANDARD ENISO683-3 NORME EUROPEENNE EUROPAISCHE NORM February 2019 ICS77.140.10:77.140.20 Supersedes EN ISO 683-3:2018 English Version Heat-treatable steels alloy steels and free-cutting steels- Part 3:Case-hardening steels (ISO 683-3:2019) Aciers pour traitement thermique aciers Fūreine Warmebehandlung bestimmte allies et aciers pour decolletage-Partie 3: Stahle legierte Stahle und Automatenstahle Aciers pour cementation (ISO 683-3:2019) Teil 3:Einsatzstahle(ISO 683-3:2019) This European Standard was approved by CEN on 17 December 2018. CEN members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists a...