EUROPEAN STANDARD EN ISO5173:2010A1 NORME EUROPEENNE EUROPAISCHE NORM November 2011 ICS25.160.40 Supersedes EN 910:1996 English Version Destructive tests on welds in metallic materials Bend tests (1SO5173:2009) Essais destructifs des soudures sur materiaux metalliques Zerstorende Prufungen von SchweilSnahten an Essais de pliage (ISO 5173:2009) metallischen Werkstoffen -Biegeprufungen (ISO 5173:2009) This European Standard was approved by CEN on 18 March 2010. CEN members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concening such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English French German).A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria Belgium Bulgaria Croatia Cyprus Czech Republic Denmark Estonia. Finland France Germany Greece Hungary Iceland Ireland Italy Latvia Lithuania Luxembourg Malta Netherlands Norway Poland Portugal Romania Slovakia Slovenia Spain Sweden Switzerland and United Kingdom. cen EUROPEAN COMMITTEE FOR STANDARDIZATION COMITE EUROPEEN DE NORMALISATION EUROPAISCHES KOMITEE FOR NORMUNG Management Centre:Avenue Marnix 17 B-1000 Brussels @2010 CEN All rights of exploitation in any form and by any means reserved Ref.No.EN ISO 5173:2010:E worldwide for CEN national Members. No reproduction or networking permitted wihout loonse from IHS Not for Resale BS EN ISO5173:2010A1:2011 ENISO5173:2010A1:2011(E) Foreword The text of ISO 5173:2009 has been prepared by Technical Committee ISO/TC 44 "Welding and allied processes"of the International Orga...
BSEN1SO4136:2012 BSI Standards Publication Destructive tests on welds in metallic materials Transverse tensile test (ISO 4136:2012) NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raisina standards worldwide" BSi Provided by IHS und ar oensa wtn BSI-Uncontrolled Copy No eproduction or networking permithed wihout ioense from IHS Not for Fosale BS EN ISO 4136:2012 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 4136:2012. It supersedes BS EN ISO 4136:2011 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee WEE/46 Non-destructive testing. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. The British Standards Institution 2012.Published by BSI Standards Limited 2012 ISBN9780580795701 ICS25.160.40 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2012. Amendments issued since publication Date Text affected Coovriaht British Standards Prowided by IHS under icense with BSI-Uncontrolled Copy No reproduction or networking wihout ioonse from IHS Not for Resale EUROPEAN STANDARD EN ISO 4136 NORME EUROPEENNE EUROPAISCHE NORM November 2012 ICS25.160.40 Supersedes EN ISO 4136:2011 English Version Destructive tests on welds in metallic materials Transverse tensile test(ISO 4136:2012) Essais destructifs des soudures sur materiaux metalliques- Zerstorende Prufung von SchweilBverbindungen an Essai de traction transversale (ISO 4136:2012) metallischen Werkstoffen-Querzugversuch (ISO 4136:2012) This European Standard was approved by CEN on 31 October 2012. CEN members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate...
BRITISH STANDARD BS EN ISO 22476-3:2005 A1:2011 Incorporating corrigendum February 2007 Geotechnical investigation and testing- Field testing- Part 3:Standard penetration test ICS93.020 BSi NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Coovriaht Brtish Standards British Standards Prowided by IHS under icense with BSI-Uncontrolled Copy No reproduction or networking permithed wihout ioense from IHS Not for Rosale BS EN ISO22476-3:2005A1:2011 National foreword This British Standard is the UK implementation of EN ISO 22476-3:2005A1:2011.It is identical to ISO 22476-3:2005 incorporating amendment 1:2011.It supersedes BS EN ISO 22476-3:2005 which is withdrawn. The start and finish of text introduced or altered by amendment is indicated in the text by tags.Tags indicating changes to ISO text carry the number of the ISO amendment.For example text altered by ISO amendment 1 is indicated by. The UK participation in its preparation was entrusted by Technical Committee B/526 Geotechnics to Submittee B/526/3 Site investigation and ground testing. A list of organizations represented on this Submittee can be obtained on request to its secretary. The test in this standard is included in BS 1377-9:1990(subclause 3.3) which is now withdrawn.Its use is covered in BS 5930:1999 clause 25.2 where there is reference to BS 1377-9:1990 clause 3.3. BS EN ISO 22476-3:2005A1:2011 should now be used instead. It should be noted that the new test method requires a calibration of the equipment for energy ratio (ratio of the actual energy to the theoretical energy of the hammer). This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments/corrigenda issued since publication This British Standard was Amd.No. Date Comments published under the authority of the Standards Policy and Strategy Commi...
BRITISH STANDARD BS EN ISO 22476-2:2005 A1:2011 Incorporating corrigendum February 2007 Geotechnical investigation and testing- Field testing- Part 2:Dynamic probing ICS93.020 BSi NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Coovriaht Brtish Standards British Standards Prowided by IHS under icense with BSI-Uncontrolled Copy No reproduction or networking parmitted wthout ioonse from IHS Not for Rosale BS EN ISO22476-2:2005A1:2011 National foreword This British Standard is the UK implementation of EN ISO 22476-2:2005A1:2011.It is identical with ISO 22476-2:2005 incorporating amendment 1:2011.It supersedes BS EN ISO 22476-2:2005 which is withdrawn. The 2005 publication of BS EN 22476-2 resulted in the partial supersession of BS 5930:1999 and BS 1377-9:1990 which have since been amended to withdraw conflicting information. The start and finish of text introduced or altered by amendment is indicated in the text by tags.Tags indicating changes to ISO text carry the number of the ISO amendment.For example text altered by ISO amendment 1 is indicated by. The UK participation in its preparation was entrusted by Technical Committee B/526 Geotechnics to Submittee B/526/3 Site investigation and ground testing. A list of organizations represented on B/526/3 can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments/corrigenda issued since publication This British Standard was Amd.No. Date Comments published under the authority of the Standards Policy and Strategy Committee 16932 28 February 2007 Revision of National foreword on 30 January 2006 Corrigendum No.1 31 January 2012 Implementation of ISO amendment The British Standards Institution 2012 1:2011 with CEN endorsement A1:2011 ISBN9780580749131 Copyright Brtish Standards insttuti...
BSEN1SO22476-1:2012 Incorporating corrigendum January 2013 BSI Standards Publication Geotechnical investigation and testing -Field testing Part 1:Electrical cone and piezocone penetration test NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raisina standards worldwide" BSi Coovight Brtish Provided by IHS under icense with BSI-Unoontroled Copy No reproduction or networking permited wthout loense from IHS Not for Resale BS EN ISO22476-1:2012 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 22476-1:2012. It is identical to ISO 22476-1:2012 incorporating corrigendum January 2013.It partially supersedes BS 1377-9:1990 specifically Clause 3.1 and also BS 5930:1999A2:2010 which is being revised to remove any conflicting material.Where conflict arises between BS EN ISO22476-1 and either BS1377-9:1990orBS5930:1990A2:2010 the provisions of BS EN ISO 22476-1:2012 take precedence.In BS 5930:1999A2:2010 specifically in Clause 26.3 where any mention to Clause 3.1 in BS 1377-9:1990 or to the 'International Reference Test Procedure'is found they should all be replaced by a reference to BS EN ISO22476-1:2012. ISO corrigendum January 2013 replaced Figure 4 with a corrected figure. The UK participation in its preparation was entrusted by Technical Committee B/526 Geotechnics to Submittee B/526/3 Site investigation and ground testing. A list of organizations represented on this submittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. @The British Standards Institution 2013. Published by BSI Standards Limited 2013 ISBN9780580771217 ICS93.020 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2013. Amendments/corrigenda issued since...
BSENISO2063-1:2019
BSIStandardsPublication
Thermal spraying - Zinc, aluminium and their alloys Part1: Design considerations and quality requirements forcorrosionprotectionsystems
bsi.
BS EN ISO 2063-1:2019 BRITISH STANDARD
National foreword ThisBritish Standard is the UK implementation of EN ISO 2063-1:2019. It is identical to ISQ 2063-1:2019.It supersedes BS EN ISO 2063-1:2017, which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee STi/40,Thermal spraying and thermally sprayed coatings. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British StandardsInstitution 2019 Published by BSI Standards Limited 2019 ISBN 978 0 539 01788 5 ICS 25.220.40; 25.220.20 CompliancewithaBritishStandardcannot conferimmunityfrom legal obligations. ThisBritish Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2019. Amendments/corrigendaissuedsincepublication Date Text affected
EUROPEANSTANDARD ENISO 2063-1 NORMEEUROPEENNE EUROPAISCHE NORM March 2019
ICS 25.220.20; 25.220.40 Supersedes EN ISO 2063-1:2017
English Version Thermal spraying -Zinc, aluminium and and their alloys -Part1:Designconsiderationsandqualityrequirements for corrosion protection systems (Is0 2063-1:2019) Projection thermique - Zinc, aluminium et alliages de Thermisches Spritzen - Zink, Aluminium und ces metaux - Partie 1: Considerations de conception ihre Legierungen - Teil 1: Bauteilgestaltung protection contre la corrosion (ISO 2063-1:2019) et exigences de qualite pour les systemes de Korrosionsschutzsysteme (ISO 2063-1:2019) This European Standard was approved by CEN on 8 February 2019. this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical CEN members are bound to pl...
BRITISH STANDARD BS EN ISO 18286:2010 Hot-rolled stainless steel plates- Tolerances on dimensions and shape (ISO18286:2008) ICS77.140.50 BSi NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW British Standards Coovriaht Brtish Standards Prowided by IHS under ioense with BSI-Unoontrolled Copy No reproduction or networking permitted wihout ioense from IHS Not for Rosale BS EN ISO18286:2010 National foreword This British Standard is the UK implementation of EN ISO 18286:2010. It is identical to ISO 18286:2008. The UK participation in its preparation was entrusted to Technical Committee ISE/105 Steels for Heat Treatment Alloy Steels Free- Cutting Steels and Stainless Steels. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard Amendments/corrigenda issued since publication was published under the authority of the Standards Policy and Strategy Date Comments Committee on 31 July 2010 eBSI 2010 ISBN9780580707490 Coovriaht British Standards Prowided by IHS under icense with BSI-Uncontrolled Copy No reproduction or networking wihout ioense from IHS Not for Fesale EUROPEAN STANDARD EN ISO 18286 NORME EUROPEENNE EUROPAISCHE NORM June 2010 ICS77.140.50 English Version Hot-rolled stainless steel plates Tolerances on dimensions and shape(ISO18286:2008) Toles en acier inoxydable laminees a chaud-Tolerances Warmgewalztes Blech aus nichtrostendem Stahl- sur les dimensions et la forme (ISO 18286:2008) GrenzabmaBe und Formtoleranzen (ISO 18286:2008) This European Standard was approved by CEN on 20 May 2010. CEN members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard with...
BSEN1SO17892-4:2016 BSI Standards Publication Geotechnical investigation and testing -Laboratory testing of soil Part 4:Determination of particle size distribution (ISO 17892-4:2016) bsi. Brissh Standards Institution Licensee-JILIN INSTITUTE OF STANDARDIZATION 5993190 Provided by IHS under icense with BSI-Uncontrolled Copy Not for Re5ae.2017420004:24 No reproduction or networking permtted wihout loonse from IHS BS EN ISO17892-4:2016 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 17892-4:2016.It partially supersedes BS 1377-2:1990 specifically clause 9. The UK participation in its preparation was entrusted to Technical Committee B/526/3 Site investigation and ground testing. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016 ISBN9780580853814 ICS13.080.20;93.020 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2016. Amendments/corrigenda issued since publication Date Text affected Brissh Standards Institution Licensee-JILIN INSTITUTE OF STANDARDIZATION 5993190 Provided by IHS under icense with BSI-Uncontrolled Copy No.for Re5ae 20174/2006:04:24 No reproduction or networking permitted wihout loonse from IHS EUROPEAN STANDARD ENISO17892-4 NORME EUROPEENNE EUROPAISCHE NORM November 2016 ICS13.080.20:93.020 Supersedes CEN ISO/TS 17892-4:2004 English Version Geotechnical investigation and testing Laboratory testing of soil-Part 4:Determination of particle size distribution (ISO17892-4:2016) Reconnaissance et essais geotechniques-Essais de Geotechnische Erkundung und Untersuchung- laboratoire sur les sols-Partie 4:Det...
BS EN ISO17892-12:2018A1:2021 BSI Standards Publication Geotechnical investigation and testing- Laboratory testing of soil Part 12:Determination of liquid and plastic limits bsi. BS EN ISO17892-12:2018A1:2021 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 17892-12:2018A1:2021.It is identical to ISO 17892-12:2018 incorporating amendment 1:2021.It supersedes BS EN ISO 17892-12:2018 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee B/526/3 Ground investigation and ground testing. A list of organizations represented on this mittee can be obtained on request to its mittee manager. Contractual and legal considerations This publication has been prepared in good faith however no representation warranty assurance or undertaking (express or implied)is or will be made and no responsibility or liability is or will be accepted by BSI in relation to the adequacy accuracy pleteness or reasonableness of this publication.All and any such responsibility and liability is expressly disclaimed to the full extent permitted by the law. This publication is provided as is and is to be used at the recipient's own risk. The recipient is advised to consider seeking professional guidance with respect to its use of this publication. This publication is not intended to constitute a contract.Users are responsible for its correct application. The British Standards Institution2021 Published by BSI Standards Limited 2021 ISBN9780539136142 ICS13.080.20;93.020 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2018. Amendments/corrigenda issued since publication Date Text affected 30 September 2021 Implementation of ISO amendment 1:2021 with CEN endorsement A1:2021:Figure A.2 replaced EUROPEAN STANDARD ENISO17892-12:2018 NORME EUROPEENNE A1 EUROPAISCHE NORM...
EUROPEANSTANDARD ENISO17639 NORMEEUROPEENNE EUROPAISCHENORM August 2013 ICS 25.160.40 Supersedes EN 1321:1996
English Version Destructive tests on welds inmetallic materials-Macroscopic andmicroscopicexaminationofwelds（ISO17639:2003) Essais destructifs des soudures sur materiaux metallques - metalschen Werkstoffen - Makroskopische und assemblages soudes (ISO 17639:2003) Examens macroscopique et microscopique des mikroskopische Untersuchungen von SchweiBnahten (ISO
17639:2003)
This European Standard was approved by CEN on 8 August 2013. CEN members are bound to ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of anational standard without any aleration Up-t-date lists and bibliographical references conceming such natinal standards may be obtained on appliation to the CEN-CENELEC Management Centre or to any CEN member. under the responsibilty of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same This European Standard exists in three official versions (Engish, French, German). A version in any other language made by translation status as the official versions. Finland, Fmr ugosla Reublic ofMaceonia France Gemany Greece, ungary, leland, reland, ly, Latvia Laia CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Kingdom. Luxembourg, Malta, Netherlands, way, Poland, Porugal, Romania, Slvakia, Slvenia, Spain, Seden, Switzerland, urkey and Uitd
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITE EUROPEEN DE NORMALISATION EUROPAISCHES KOMITEE FUR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
@ 2013 CENworldwide for CEN national Members. All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17639:2013: E
Cogyigt Brith Stadyrds fisice
Not or Raule
BS EN ISO 17639:2013
EN ISO 17639:2013 (E)
Foreword The text of ISO 17639:2003 has been prepared by Technical Committe ISO/TC 44 Welding and allied 17639:2013 by Technical Committee CEN/TC 121 *Welding* the secretariat of which is held by DIN. ThisEuropean Standard shallbe given the status of a national standardeither by publication ofanidentical text or by endorsement, at the latest by February 2014, and conflicting national standards shall be withdrawn at the latest by February 2014.
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1321:1996. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 17639:2003 has been approved by CEN as EN ISO 17639:2013 without any modification.
Not tsrRasle
BS EN ISO 17639:2013 ISO 17639:2003(E)
Contents Page
Foreword. iv 1Scope..1 2Normative references ...1 3Terms and definitions.1 4Abbreviations2 5Principle2 6Purpose of the test..2 7Removal of test specimens.2 8Test procedure4 8.1General..4 8.2Test specimen preparation...4 8.3Surface finish4 8.4Etching methods.4 8.5Etchants.5 8.6Safety measures..5 9Examination..5 10Designation...5 11Test report..8 Annex A (informative) Example of a test report6
Co ssas003 Arights reserved Proidsd by IHG under lcamnaa ath BSI- Ureorndrole Copy No spducioe or ntworting pemted wlhoud icara fom iHs Not for Ratale
BS EN ISO 17639:2013 ISO 17639:2003(E)
Foreword
(ISO member bodies). The work of preparing Intermational Standards is normally carried out through ISO technical mittees. Each member body interested in a subject for which a technical mittee has been established has the right to be represented on that mittee. International organizations, govemmental and Intemational Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Intermational Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
adopted by the technical mittees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
'suu juejed uons le o Kue Busjguap! oj elqisuodseu pieu eq sou eys Osi sjubu ISO 17639 was prepared by Technical Committee ISO/TC 44, Welding and allied processes, Submitte SC 5, Testing and inspection of welds.
Secretariat of ISO/TC 44/SC 5 via the member body in the user's country, a plete listing of which can be found at
@ ISO 2003 All rights reserved Not tor Ratule
BS EN ISO 17639:2013 INTERNATIONALSTANDARD ISO 17639:2003(E)
Destructivetestsonweldsinmetallicmaterials-Macroscopic andmicroscopicexaminationofwelds
1Scope
objectives for macroscopic and microscopic examination.
2Normativereferences
references, only the edition cited applies. For un...
BS EN ISO15614-8:2016 BSI Standards Publication Specification and qualification of welding procedures for metallic materials-Welding procedure test Part 8:Welding of tubes to tube-plate joints (ISO15614-8:2016) bsi. ..making excellence a habit. Brissh Standards Institution BS EN ISO15614-8:2016 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 15614-8:2016.It supersedes BS EN ISO 15614-8:2002 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee WEE/36 Qualification of welding personnel and welding procedures. A list of organizations represented on this mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. The British Standards Institution2016.Published by BSI Standards Limited 2016 ISBN9780580856983 1C525.160.10 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2016. Amendments issued since publication Date Text affected Brissh Standards Institution EUROPEAN STANDARD ENISO15614-8 NORME EUROPEENNE EUROPAISCHE NORM April 2016 ICS25.160.10 Supersedes EN ISO 15614-8:2002 English Version Specification and qualification of welding procedures for metallic materials-Welding procedure test-Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2016) Descriptif et qualification d'un mode operatoire de Anforderung und Qualifizierung von SchweifBverfahren soudage sur les materiaux metalliques-Epreuve de fur metallische Werkstoffe- qualification d'un mode operatoire de soudage-Partie SchweifSverfahrensprufung-Teil 8:EinschweifSen von 8:Soudage de tubes sur plaques tubulaires (ISO 15614- Rohren in Rohrboden (ISO 15614-8:2016) 8:2016 This European Standard was approved by CEN on 2 January 2016. CEN members are ...
BRITISH STANDARD BS EN ISO 15614-2:2005 Specification and qualification of welding procedures for metallic materials-Welding procedure test Part 2:Arc welding of aluminium and its alloys The European Standard EN ISO 15614-2:2005 has the status of a British Standard ICS25.160.10 BSi NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Copyright Brtish Standards ins British Standards BS EN ISO15614-2:2005 National foreword This British Standard is the official English language version of EN ISO 15614-2:2005.It is identical with ISO 15614-2:2004.It supersedes BS EN 288-4:1992 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee WEE/36 Approval testing of welding procedures and welders which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European mittee any enquiries on the interpretation or proposals for change and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this mittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled "International Standards Correspondence Index" or by using the“Search'"facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. Compliance with a British Standard does not ofitself confer immunity from legal obligations. This British Standard was Summary of pages published under the authority of the Standards Policy and This document prises a front cover an inside front cover the EN ISO title Strategy Committee on page pages 2 to 35 and a back cover. 26 April 2005 The BSI copyright notic...
BS EN ISO15614-1:2017A1:2019 Incorporating corrigenda July 2017 and May 2018 BSI Standards Publication Specification and qualification of welding procedures for metallic materials-Welding procedure test Part 1:Arc and gas welding of steels and arc welding of nickel and nickel alloys bsi. Copyright British Standards nsthution Licensee=Shenzhen of Standands and Technology 9072181 Provided by IHS Markst under icense with BSI-Uncontroled Copy Not5 or Resale.20203/111406:58 No reproduction or networking permitted wthout loense from IHS BS EN ISO15614-1:2017A1:2019 BRITISH STANDARD National foreword This British Standard is the UK implementation of ENISO15614-1:2017A1:2019.It is identical to ISO15614-1:2017 incorporating amendment 1:2019.It supersedes BS EN ISO 15614-1:2017 which is withdrawn. BSI as a member of CEN is obliged to publish EN 15614-1:2017A1:2019 as a British Standard.However attention is drawn to the fact that during the development of this standard the UK mittee voted against its approval. The UK mittee is concerned that the format of this standard may cause a problem when working to either of the two welding procedure test levels.Level 1 is based on the requirements of ASME BPVC Section IX Welding Brazing and Fusing Qualifications and Level 2 for which the extent of testing is greater is based on the previous version of this standard;BS EN ISO 15614-1:2004A2:2012.It is important to note that a procedure test carried out to Level 2 automatically qualifies for Level 1 requirements but not vice-versa.Furthermore when no level is specified in a contract or application standard all the requirements of Level 2 should be applied. Users should be aware that as the requirements of the two levels are often specified in the same clause vigilance is required to identify the testing requirements and the range of qualification for the particular welding procedure test level. The start and finish of text introduced or altered by amendment is indicated in th...