ASMEBoilerand2 02 1 PressureVessel CodeAnlnternationalCode
PartDProperties(Metric)
Markings such as “ASME . “ASME Standard ° or any other marking including “ASME ” ASME logos or the ASME Single Certification Mark shall not be used on any item that is not constructed inaccordance with all of the applicable requirements of the Code or Standard. Use of of the ASME Single Certification Mark requires formal ASME certification; if no certification program isavailable such ASME markings may not be used. (For Certification and Accreditation Programs see
Items produced by parties not formally possessing an ASME Certificate may not be described either explicitly or implicitly as ASME certified or approved in any code forms or other document.
Properties (Metric)
ASME Boiler and Pressure Vessel Committeeon Materials
American National Standards and it is an American National Standard. The Standards Committee that approved This international code or standard was developed under procedures acredited as meeting the criteria forthe code or standard was balanced to assure that individuals from petent and concerned interests have had an opportunity to participate. The proposed code or standard was made available for public review and -ment that provides an opportunity for additional public imput from industry academia regulatory agencies and the public-at-large.
ASME does not *approve *certify ” rate or “endorse any item construction proprietary device or activity. ASME doesot taeanyposition with respect to thealidity ofanypatent rights assertedin conection withanyitems mentioned in this document and does not undertake to insure anyone utilizing a standard against liabilityfor infringement of any applicable letters patent nor assume any such liability. Users of a code or standard are expressly advised that determination of the validity of any such patent rights and the risk of infingement of suchrights is entirely their own responsibility.
Participation by federal agency representative(s) or person(s) aflited with industry is not to be interpreted asgovernment or industry endorsement of this code or standard.
ASMEaccepts responsibility for only those interpretations of this document issued in accordance with the stablished ASME procedures and policies which precludes the issuance of interpretations by individuals.
The endnotes and preamble in this document (if any) are part of this American National Standard.
ASME Collective Membership Mark
ASME Single Certification Mark
ASME" and the above ASME symbels are registered trademarks of The Americamn Society of Mechanical Engineers.
No part of this decament may be reproduced in any form in an electrenic retrieval system or otherwise without e prior written permission of thepublisher.E6E-9s uaqumN pey 8opeey sadfuog po Anaq Prinmted in the United States ef AmericaAdopted by the Coumil of The American Society of Mechanical Engineers 1914; latest edition 2021.The American Society of Mechanical Engineers Tso Park Avenue New York NY 10016-5990q 1zoz @ wRufdoTHE AMERICAN SOCIETY OF MECHANICAL ENGINEERS All rights reserved
TABLEOFCONTENTS
List of Sections Foreword xii xvStatement of Policy on the Use of the ASME Single Certification Mark and Code Authorization in Advertising -...... xviiStatement of Policy on the Use of ASME Marking to Identify Manufactured Items Submittal of Technical Inquiries to the Boiler and Pressure Vessel Standards Committees xvii xviiPersonnel Summary of Changes xxi xliList of Changes in Record Number Order Cross-Referencing and Stylistic Changes in the Boiler and Pressure Vessel Code xlix 1Subpart 1 StressTables............................. Statement of Policy on Information Provided in the Stress Tables 1Guideline on Locating Materials in Stress Tables and in Tables of Mechanical 1Subpart 2 Physical Properties Tables and Physical Properties 1095 3Introduction 1095Charts and Tables for Determining Shell Thickness of Components Un- der External Pressure 1136Mandatory Appendix 1 1-100 Basis for Establishing Stress Values in Tables 1A and 1B Derivation of Allowable Stress Values 1266 1266Mandatory Appendix 2 Basis for Establishing Design Stress Intensity Values for Tables 2A 2B 2-100 Derivation of Stress Intensity Values and 4 and Allowable Stress Values for Table 3 1268 1268Mandatory Appendix 3 Basis for Establishing External Pressure Charts 12713-100 3-200 General Basis of Charts in Subpart 3 1271 12713-300 3-400 Use of Charts in Subpart 3 Background and Development of Theory 1271 12713-500 3-600 Criteria for Allowable Stresses 1271 12723-700 3-800 Procedure and Responsibility for Chart Development Altermate Procedure for Determining Allowable Compressive Stresses - - .... 1275 12763-900 1276Guidelines on the Approval of New Materials Under the ASME Boiler and Pressure Vessel Code 1278Application 1278 1278Chemical Composition Metallurgical Structure and Heat Treatment 1280 1280Definitions for Data Collection Purposes Mechanical Properties 1280 1280Time-Independent Properties Required Sampling 1280 1281Time-Dependent Properties 1281 1283Toughness Data ........ 1283
Subpart 3
Mandatory Appendix 5
5-100 5-2005-300 5-4005-500 5-6005-700 5-8005-900 5-10005-1100
