AWSA5.9/A5.9M:2017 (ISO14343:2009MOD) An American National Standard Welding Consumables--Wire Electrodes Strip Electrodes Wires and rods for Arc Welding of Stainless and Heat Resisting Steels--Classification 焊接材料一不锈钢和 耐热钢电弧焊丝、焊 带、焊丝和填充丝- 分类 AWS American Welding Society ANSI 本标准译文难免有不妥之处’欢迎各位批评指正 AWSA5.9/A5.9M:2017 (ISO14343:2009MOD) An American National Standard Approved by American National Standards Institute December 09 2016 Welding Consumables-Wire Electrodes Strip Electrodes Wires and Rods for Arc Welding of Stainless and Heat Resisting Steels—Classification 焊接材料一不锈钢和耐热钢电弧焊丝 、焊带、焊丝和填充丝一分类 9th Edition Supersedes AWS A5.9/A5.9M:2012 Prepared by the American Welding Society (AWS)A5 Committee on Filler Metals and Allied Processes 编写者美国焊接协会(AWS)A5填充金属及相关工艺委员会编写 Under the Direction of the AWS Technical Activities Committee 在AWS技术活动委员会 Approved by the AWS Board of Directors 由AWS董事会批准 Abstract摘要 This specification prescribes the requirements for classification of bare solid stainless steel electrodes(both as wire and strip)for gas metal arc welding submerged arc welding and other fusion welding processes.It also includes wire and rods for use in gas tungsten arc welding and plasma arc welding.Classification is based on chemical position of the filler metal.A guide is appended to the specification as a source of information concerning the classification system employed and the intended use of the stainless steel filler metal.本规范规定了用于气体金属电弧焊、埋弧焊和其他熔化焊接工艺的裸实心不锈钢焊丝（包括线和带）的 分类要求...
AWS A5.9 A5.9M-2017 焊接材料—不锈钢和耐热钢电弧焊丝、焊带、焊丝和填充丝-分类（中英文参考版）.pdf
