JIS B1506-2005 Rolling bearings-Rollers(英文版).pdf

Industrial,Japanese,JIS,rollers,Standard,国外及港澳台标准
文档页数:48
文档大小:1.6MB
文档格式:pdf
文档分类:国外及港澳台标准
上传会员:
上传日期:
最后更新:

Translated and Published byJapanese Standards Association

JIS B 1506:2005 (JBIA)

Rolling bearings-Rollers

Foreword

This translation has been made based on the original Japanese Industrialdeliberations at the Japanese Industrial Standards Committee as the result Standard revised by the Minister of Economy Trade and Industry throughof proposal for revision of Japanese Industrial Standard submitted by TheJapan Bearing Industrial Association (JBIA) with the draft being attached based on the provision of Artiele 12 Clause 1 of the Industrial StandardizationLaw applicable to the case of revision by the provision of Article 14.Conse-quently JIS B 1506 : 1991 is replaced with this Standard.

This revision has been made based on ISO 3096:1996 Rolling bearingsNeedlerollers-Dimensions and tolerances for thepurposes ofmaking it easierto pare this Standard with International Standard; to prepare Japanese Industrial Standard conforming with International Standard; and to proposea draft of an International Standard which is based on Japanese IndustrialStandard.

Attention is drawn to the possibility that some parts of this Standard maypublic utility model right or application for registration of utility model after opening to the public which have technical properties. The relevantMinister and the Japanese Industrial Standards Committee are not responsible for identifying the patent right application for a patent afteropening to the publie utility model right or application for registration ofutility model after opening to the public which have the said technical properties.

The title of this Standard has been changed from that of the previous edition“Rollers for roller bearing” to°Rolling bearings-Rollers".

Date of Establishment: 1965-03-01

Date of Revision: 2005-03-20

JIS B 1506:2005 First English edition published in 2005-11

Translated and published by: Japanese Standards Association4-1-24 Akasaka Minato-ku Tokyo 107-8440 JAPAN

In the event of any doubts arising as to the contents the original JIS is to be the final authority.

Printed in Japan

Contents

PageIntroduction.Scope12 Normative references.. 13 Terms and definitions and quantity symbols 24 Classification and division. 35 Grade 4End surface shape6 47 Designation and dimensions.8 Permissible deviations and values9 Hardness 510 Surface roughness 511 Materials12 Measuring method and testing method. 513 Inspection. 714 Designation of products.15 Packaging and marking....Annex 1 (informative) Tapered rollers and convex rollers 16Annex 2 (informative) Measurement of circularity deviation by means ofa V block 19Annex 3 (informative) Comparison table between JIS and corresponding International Standard .... 21

Rollingbearings-Rollers

Introduction This Japanese Industrial Standard has been prepared by adopting for the corresponding parts (needle rollers) the second edition of ISO 3096 : 1996 Rollingbearings-Needle rollers-Dimensions and tolerances and adding to it the require-ments unique to Japanese Industrial Standard (long cylindrical and cylindrical roll-ers).

The portions given sidelines or dotted underlines are the matters not stated inthe original International Standard.

1 Seope This Standard specifies finished steel needle rollers long cylindrical rollers and cylindrical rollers (hereafter referred to as “rollers") to be used mainly as roll-ing elements of rolling bearings.

Remarks : The International Standard corresponding to this Standard is as fol-lows.

In addition, symbols which denote the degree of correspondence inthe contents between the relevant International Standard and JISare IDT (identical) MOD (modified) and NEQ (not equivalent) ac-cording to ISO/IEC GUIDE 21.

ISO 3096:1996Rolling bearings-Needle rollers-Dimensions and tolerances (MOD)

2 Normative references The following standards contain provisions which through reference in this text constitute provisions of this Standard. The most recent edi-tions of the standards (including amendments) indicated below shall be applied.

JIS B0124Rollingbearings-Symbolafor quantitiesJIS B 0401-2 ISO system of limits and fits-Part 2:Tables of standard tolerance gradesand limit deviations for holes andshaftsRemarks: ISO 286-2:1988 ISO system of limits and fits-Part 2: Tables ofstandard tolerance gradesand limit deviationsforholes and shaftsis identical with the said standard.JIS B 0601GeometricalProduct Specification(GPS)Surface texture:Profile method-Terms definitions andsurface texture parametersJIS B 0651GeometricalProduct Specification(GPS)-Surface texture:Profilemethod-Nominal characteristicsofcontact(stylus)instrumentsJIS B 1515 Measuringmethodsfor rollingbearingsJISB 7451Instrumentsfor the assessment ofdeparturefrom roundness-Mea-surement of variations in radiusRemarks:ISO 4291:1985 Methodsfor the assessment of departure fromround ness-Measurement of uariations in radius is equivalent to the said

JIS B 0104Rolling bearings-Vocabulary

standard.

JIS G4805Highcarbon chromiumbearingsteelsJIS Z2244Vickera hardness test-TestmethodJIS Z 2245Rockucellhardness test-Test method

3Terms and definitions and quantity symbols For the purposes of this Stan-dard the definitions of the terms and the quantity symbols in JIS B 0104 and JISB 0124 respectively apply in addition to those shown in the following (see attachedtables 1 to 8).

a)designation the designation to be used for the general identification of the dimensions of the roller which is expressed by "nominal diameter x nominallength"b) nominal diameter (Dw)diameter value used for the purpose of general iden-tification of a roller diameterc)single diameter (Dus)distance between two tangents to the roller surface par-allel to each other and in a plane perpendicular to the roller axis i.e. a radial planemean diameter in a single plane (Dvmp) arithmetical mean of the largestand the smallest actual single diameters of the roller in a single radial planee diametervariation in a singleradial plane(Vpp)difference between the maximum value and the minimum value of single diameter ofroller in a radialplanevariationofsingleplane mean diameter(Vpwm)differencebetween themaximumvalue and the minimum value in mean diameter in plane of a rollernominal length (L)length value used for the purpose of general identifica-tion of a roller lengthh)single length (Lw)distance between the two radial planes which just con-tain the end extremitiesof rolleri)dimension difference of length(Azws)difference between the singlelength and the nominal lengthj)nominal chamfer dimension (r) chamfer dimension value used for the pur-pose of general identification of aroller chamferk)single chamfer dimension (r.)actual radial distance or axial distance in anaxial plane from theimaginary corner of flat end roller up to the intersectingpoint of chamfer of roller with the end surface or rolling contact surface1) smallest permissible single chamfer dimension of roller (rs min)the smallestpermissible radial single chamfer dimension and axial single chamfer dimen- sion of flat end rollerm)largest permissible single chamfer dimension of roller (r.m) the larg.est permissible radial single chamfer dimension and axial single chamfer di-mension of flat endroller

资源链接请先登录(扫码可直接登录、免注册)
①本文档内容版权归属内容提供方。如果您对本资料有版权申诉,请及时联系我方进行处理(联系方式详见页脚)。
②由于网络或浏览器兼容性等问题导致下载失败,请加客服微信处理(详见下载弹窗提示),感谢理解。
③本资料由其他用户上传,本站不保证质量、数量等令人满意,若存在资料虚假不完整,请及时联系客服投诉处理。
④本站仅收取资料上传人设置的下载费中的一部分分成,用以平摊存储及运营成本。本站仅为用户提供资料分享平台,且会员之间资料免费共享(平台无费用分成),不提供其他经营性业务。
投稿会员:匿名用户
我的头像

您必须才能评论!

手机扫码、免注册、直接登录

 注意:QQ登录支持手机端浏览器一键登录及扫码登录
微信仅支持手机扫码一键登录

账号密码登录(仅适用于原老用户)