ASTM D4806-20 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Us.pdf

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards Guides and Remendations issued by the World Trade Organization Technical Barriers to Trade (TBT)Committee. Designation:D4806-20 NTERNATIONAL Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuell This standard is issued under the fixed designation D4806:the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon (e)indicates an editorial change since the last revision or reapproval. 1.Scope* mendations issued by the World Trade Organization Technical 1.1 This specification covers nominally anhydrous dena- Barriers to Trade (TBT)Committee. tured fuel ethanol intended to be blended with unleaded or 2.Referenced Documents leaded gasolines at 1 to 15 by volume for use as automo- tive spark-ignition engine fuel covered by Specification D4814 2.1 ASTM Standards:2 as well as other fuel applications or specifications involving D86 Test Method for Distillation of Petroleum Products and ethanol.The significance of this specification is shown in Liquid Fuels at Atmospheric Pressure Appendix X1. D381 Test Method for Gum Content in Fuels by Jet Eva...